Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mohamed Ben Rhouma has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental Investigation of CFRP-Wrapped RC Columns Under Contact Explosions: Effects of Single vs. Dual-Layer Configurations

    by Azer Maazoun, Oussama Atoui, Mohamed Ben Rhouma

    Reinforced concrete (RC) columns, vital components of urban infrastructure, are highly vulnerable to severe damage from contact explosions, posing significant threats to structural integrity and occupant safety. This study presents a rigorous experimental investigation into the dynamic blast response of RC columns and the efficacy of externally bonded Carbon Fiber Reinforced Polymer (CFRP) wraps as a retrofitting solution. Three series of scaled RC columns were subjected to controlled contact explosions using RDX charges of 50 g, 30 g, and 20 g. For each charge level, three configurations were tested: unretrofitted, single-layer unidirectional CFRP (hoop direction), and dual-layer orthogonal CFRP (hoop and longitudinal). A comprehensive instrumentation system, including high-speed cameras, accelerometers, and pressure transducers, captured blast overpressure, crack evolution, and dynamic acceleration. The results demonstrate that CFRP retrofitting substantially enhances blast resistance and structural performance. Peak accelerations were reduced by up to 68%, with the dual-layer configuration achieving the highest mitigation across all charge levels. In terms of damage control, a single CFRP layer reduced spalling height by 65%, while the dual-layer system achieved up to a 75% reduction. Damage depth was also mitigated by up to 60%, highlighting the superior energy dissipation and containment provided by multi-layered CFRP. These findings underscore CFRP’s significant potential as a robust, practical, and scalable retrofitting solution for enhancing the blast resilience of critical infrastructure, contributing directly to improved urban safety and structural protection in blast-prone environments.


  • Comparison of ALE, LBE, and the Idealized Triangular Loading Method for Evaluating an EDST Blast Loading on a Laboratory-Scale RC Column

    by Walid Ben Kraiem, Mohamed Ben Rhouma, Bachir Belkassem, David Lecompte

    The collapse of buildings during explosions or other extreme events is often linked to the failure of key structural elements such as columns. As vertical load-bearing members, reinforced concrete (RC) columns are essential for maintaining the stability of structures, but are also among the most vulnerable components when exposed to blast loads. This study focuses on the numerical prediction of the dynamic behavior of RC columns subjected to explosive-driven shock tube (EDST) loading. The analysis is based on an experimental campaign using a laboratory-scale RC column specimen with a height of 1500 mm and a circular cross-section of 100 mm, tested under blast loading generated by a 30 g C4 charge. To simulate the structural response and optimize computational performance, three finite element techniques are evaluated and compared: Multi-Material Arbitrary Lagrangian-Eulerian (MM-ALE), Load Blast Enhanced (LBE), and the Idealized Triangular Loading (ITL) method. All three models are validated against experimental data. In terms of mid-span out-of-plane displacement, MM-ALE showed the best accuracy with a 2.1% discrepancy, followed by LBE at 8.8%, and ITL at 10.6%. Regarding computation time, MM-ALE required 12 hours, while LBE was three times faster and ITL was six times faster than MM-ALE. The LBE method presents a balance between speed and accuracy but relies on precise input values for reflected pressure and impulse, which are typically derived from MM-ALE simulations or analytical expressions. The ITL method, while computationally efficient, tends to overestimate peak displacements due to its simplified and uniform pressure application. Among the three approaches, MM-ALE remains the most accurate.

  • Blast loading of cylindrical columns using a small-scale explosive-driven shock tube

    by B. R. Mohamed, M. Azer, A. Aldjabar, B. Bachir, T. Tine, L. David


  • Open Access

    Damage Assessment of Laboratory-Scale Reinforced Concrete Columns Under Localized Blast Loading

    by Mohamed Ben Rhouma, Azer Maazoun, Aldjabar Aminou, Bachir Belkassem, Tine Tysmans, David Lecompte

    Reinforced concrete (RC) columns are structural components that carry loads and are vulnerable to damage and possible failure under blast loads. Understanding how damage accumulates and cracks propagate in these structural members is essential for improving their resilience and designing blast-resistant buildings. This study introduces an experimental approach to mitigate the fireball and fumes generated by an explosion, allowing for a more precise structural response assessment. With the help of high-speed cameras, this study experimentally investigates the real-time damage progression and crack formation in RC columns. To explore these failure mechanisms, laboratory-scale RC columns with a low reinforcement ratio are intentionally designed to experience significant damage, providing deeper insights into concrete-specific failure patterns. The tested columns are 1800 mm long and have a 100 mm diameter. Each specimen is reinforced with 3 mm longitudinal reinforcement bars and 2 mm transverse bars. An explosive driven shock tube (EDST) is used to apply blast loads, targeting the mid-height of the columns. High-speed digital image correlation (DIC) tracks the overall structural response. A numerical simulation is developed in LS-DYNA and compared with experimental data for validation. The findings demonstrate that the proposed FE model accurately simulates both the applied blast load and the resulting failure patterns. The difference between the mid-span lateral displacement predicted by the numerical simulation and the average experimental measurements remains within 15%.


  • Open Access

    Experimental and Numerical Evaluation of Calcium-Silicate-Based Mineral Foam for Blast Mitigation

    by Aldjabar Aminou, Mohamed Ben Rhouma, Bachir Belkassem, Hamza Ousji, Lincy Pyl, David Lecompte

    Cellular materials such as aluminum and polyurethane foams are recognized for their effectiveness in energy absorption. They commonly serve as crushable cores in sacrificial cladding for blast mitigation purposes. This study delves into the effectiveness of autoclaved aerated concrete (AAC), a lightweight, porous material known for its energy-absorbing properties as a crushable core in sacrificial cladding. The experimental set-up features a rigid frame made of steel measuring 1000 × 1000 × 15 mm3 with a central square opening (300 × 300 mm2) holding a 2 mm thick aluminum plate representing the structure. The dynamic response of the aluminum plate is captured using two high-speed cameras arranged in a stereoscopic configuration. Three-dimensional digital image correlation is used to compute the transient deformation fields. Blast loading is achieved by detonating 20 g of C4 explosive set at 250 mm from the plate’s center. The study assesses the mineral foam’s absorption capacity by comparing out-of-plane displacement and mean permanent deformation of the aluminum plate with and without the protective solution. Six foam configurations (A to F) are tested experimentally and numerically, varying in the foam’s free space for expansion relative to its total volume. Results show positive protective effects, with configuration F reducing maximum deflection by at least 30% and configuration C by up to 70%. Foam configuration influences energy dissipation, with an optimal lateral surface-to-volume ratio (ζ) enhancing protective effects, although excessive ζ leads to non-uniform foam crushing. To address the influence of front skin deformability, a non-deformable front skin has been adopted. The latter demonstrates an increased effectiveness of the sacrificial cladding, particularly for ζ values above the optimal value obtained when using a deformable front skin. Notably, using a non-deformable front skin increases maximum deflection reduction and foam energy absorption by up to approximately 30%.


  • Open Access

    Blast Loading of Small-Scale Circular RC Columns Using an Explosive-Driven Shock Tube

    by Mohamed Ben Rhouma, Azer Maazoun, Aldjabar Aminou, Bachir Belkassem, Ignaas Vandenbruwane, Tine Tysmans, David Lecompte

    Reinforced concrete (RC) columns, being axial-bearing components in buildings, are susceptible to damage and failure when subjected to blast loading. The failure of these columns can trigger a progressive collapse in targeted buildings. The primary objective of this study is to investigate the failure characteristics of laboratory-scale RC columns subjected to localized blast loading. The columns, with a length of 1500 mm and an outer diameter of 100 mm, are reinforced with 6 mm diameter longitudinal bars and 2 mm diameter steel ties. The blast loading is generated using an explosive-driven shock tube (EDST) positioned in front of the mid-span of the RC columns with a 30 g and 50 g charge. To capture the global response of the RC columns, high-speed stereoscopic DIC is used in addition to LVDTs. Furthermore, an FE model is developed using LS-DYNA R10.0 and validated against the experimental data. The results show that the proposed FE approach is able to reproduce the applied blast loading and the failure characteristics of the columns. The relative difference in column mid-span out-of-plane displacement between the FE model and the average measured data lies below 5%. Finally, the gray correlation method is conducted to assess the influence of various parameters on the blast resistance of the RC columns.