Menghe Jin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Menghe Jin has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Alexandre Schmid
Swiss Federal Institute of Technology in Lausanne
2 shared publications - Catherine Dehollain
Swiss Federal Institutes of Technology
2 shared publications - Mohammad Javad Karimi
Institute of Electrical and Micro Engineering, Swiss Federal Institute of Technology Lausanne, Lausanne, Switzerland
2 shared publications - Yuxuan Zhou
College of Computer and Control Engineering, Northeast Forestry University, Harbin, China
1 shared publication
Latest Publications
- Open Access
- 28 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Circuits and Systems
- Vol. 5, 117-127
A Wireless Power Conversion Chain With Fully On-Chip Automatic Resonance Tuning System for Biomedical Implants
This paper presents a wireless power conversion system designed for biomedical implants, with integrated automatic resonance tuning. The automatic tuning mechanism improves power transfer efficiency (PTE) by finely tuning the resonant frequency of the power link and maximizing the rectified voltage. This adjustment ensures robust and reliable remote powering, even in the face of environmental changes and process variations, while also minimizing tissue exposure to power. On-chip switched array capacitors are connected in parallel with the resonant capacitor, and the system identifies the optimal switched capacitor combination for the highest rectified voltage by iterating over each of them. The proposed system is implemented and fabricated in standard 180 nm CMOS technology, with a total area of 0.339mm2, and its operation is verified. The measurement results demonstrate that this system provides tolerance up to mismatches equivalent to 75 pF capacitance variation in LC tank, ±15% LC variation in this design. The system offers a PTE enhancement from 9.1% to 30.2% in case of high LC variation, and the tuning control consumes 154.7 μW of power during resonance tuning. Moreover, the power conversion chain delivers an optimized rectified voltage along with a regulated voltage of 1.8 V.
- 28 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Circuits and Systems
- Vol. 5, 117-127
Open AccessA Wireless Power Conversion Chain With Fully On-Chip Automatic Resonance Tuning System for Biomedical Implants
This paper presents a wireless power conversion system designed for biomedical implants, with integrated automatic resonance tuning. The automatic tuning mechanism improves power transfer efficiency (PTE) by finely tuning the resonant frequency of the power link and maximizing the rectified voltage. This adjustment ensures robust and reliable remote powering, even in the face of environmental changes and process variations, while also minimizing tissue exposure to power. On-chip switched array capacitors are connected in parallel with the resonant capacitor, and the system identifies the optimal switched capacitor combination for the highest rectified voltage by iterating over each of them. The proposed system is implemented and fabricated in standard 180 nm CMOS technology, with a total area of 0.339mm2, and its operation is verified. The measurement results demonstrate that this system provides tolerance up to mismatches equivalent to 75 pF capacitance variation in LC tank, ±15% LC variation in this design. The system offers a PTE enhancement from 9.1% to 30.2% in case of high LC variation, and the tuning control consumes 154.7 μW of power during resonance tuning. Moreover, the power conversion chain delivers an optimized rectified voltage along with a regulated voltage of 1.8 V.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 18 (3) , 636-647
Wirelessly Powered and Bi-Directional Data Communication System With Adaptive Conversion Chain for Multisite Biomedical Implants Over Single Inductive Link
A wirelessly powered and data communication system is presented which is implemented as a full system, designed for multisite implanted biomedical applications. The system is capable of receiving wireless power and data communication for each implant separately, using inductive links with different resonance frequencies. To achieve this, dual-band coils are presented in the system. In addition, the system provides bi-directional data communication, utilizing amplitude and load shift keying (ASK and LSK) modulation schemes over a single inductive link. The system employs a digitally assisted active rectifier and an automatic resonance tuning system, to improve the power transfer efficiency (PTE) through various coupling coefficients, while minimizing the reverse current and power dissipation. The power control unit enables closed-loop monitoring to prevent high or low power delivery, and it can detect inefficient or excessive wireless power transmission or prevent temperature elevation by limiting the voltage to a safe level. A separated-V b ASK demodulator is presented in the paper which is utilized within the data conversion chain, serving both the external and implanted units. The whole system is fabricated using a standard 180-nm 1.8/3.3 V CMOS process with a core area of 0.82 mm 2 . The system is tested with coupled multisite inductive links and offers the maximum overall PTE of 31.2%, from the Tx coil to the implant load.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 18 (3) , 636-647
Wirelessly Powered and Bi-Directional Data Communication System With Adaptive Conversion Chain for Multisite Biomedical Implants Over Single Inductive Link
A wirelessly powered and data communication system is presented which is implemented as a full system, designed for multisite implanted biomedical applications. The system is capable of receiving wireless power and data communication for each implant separately, using inductive links with different resonance frequencies. To achieve this, dual-band coils are presented in the system. In addition, the system provides bi-directional data communication, utilizing amplitude and load shift keying (ASK and LSK) modulation schemes over a single inductive link. The system employs a digitally assisted active rectifier and an automatic resonance tuning system, to improve the power transfer efficiency (PTE) through various coupling coefficients, while minimizing the reverse current and power dissipation. The power control unit enables closed-loop monitoring to prevent high or low power delivery, and it can detect inefficient or excessive wireless power transmission or prevent temperature elevation by limiting the voltage to a safe level. A separated-V b ASK demodulator is presented in the paper which is utilized within the data conversion chain, serving both the external and implanted units. The whole system is fabricated using a standard 180-nm 1.8/3.3 V CMOS process with a core area of 0.82 mm 2 . The system is tested with coupled multisite inductive links and offers the maximum overall PTE of 31.2%, from the Tx coil to the implant load.