AJAyush Jain

Ayush Jain

*This is an algorithmically generated author record based on publicly available information.

Ayush Jain has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Tribological Performance Comparison of Lubricating Greases for Electric Vehicle Bearings

    by Deepika Shekhawat, Ayush Jain, Nitesh Vashishtha, Arendra Pal Singh, Rahul Kumar

    EV motors and machine elements operate at higher speeds, generate significant heat and noise (vibration), and subject lubricants (bearings) to multiple degrading factors, requiring thermal stability, wear protection, mitigating wear mechanisms like pitting and scuffing, and low electrical conductivity to prevent arcing damage to bearings. This study evaluates the tribological performance of four types of greases—PUEs, PUPao, PUEth (polyurea-based), and LiPAO (lithium–calcium complex-based)—to determine their suitability for electric motor bearings. Key performance metrics include tribological properties, electrical resistivity, leakage, bearing noise, and wear behavior. A four-ball wear test ranks the greases by scar diameter as PUPao < PUEs < PUEth < LiPAO, while the coefficient of friction is observed in the range of 0.15–0.18, with LiPAO exhibiting the lowest friction. Electrical resistivity tests reveal that PUEs grease has the lowest resistivity. Electrical leakage tests, conducted with a voltage differential across bearings, assess pitting damage, with PUEth and LiPAO showing evidence of surface pitting. Optical microscopy and scanning electron microscopy analysis is carried out to examine the pitting. In bearing noise tests, PUEs demonstrates the lowest noise levels, whereas LiPAO produces the highest. Visual and microscopic examination of the greases further characterizes their lubricating properties. Based on overall performance, the greases are ranked in suitability for electric motor applications as PUEs > PUPao > PUEth > LiPAO. The findings highlight the critical need for selecting appropriate grease formulations to ensure optimal bearing performance under varying operational conditions.


  • Open Access

    Effect of Surface Roughness on the Friction Moment in a Lubricated Deep Groove Ball Bearing

    by Harsh Kumar, Vaibhav Gupta, Velamala Bharath, Mayank Tiwari, Surajit Kumar Paul, Lokesh Agrawal, Arendra Pal Singh, Ayush Jain

    Deep groove ball bearings (DGBBs) are extensively utilized in industrial machinery, mechanical systems, and household appliances due to their simple design, low maintenance, and ability to operate at high speeds. A critical issue in the performance of these bearings is the power loss by internal friction torque, which adversely affects system efficiency, longevity, and reliability, particularly in demanding applications such as aviation and marine systems. The friction torque in DGBBs is influenced by factors such as load, speed, surface roughness, and lubricant viscosity, making the precise understanding of these elements essential for optimizing system efficiency. Despite its significance, the effect of surface roughness on friction torque in DGBBs remains underexplored. This paper presents an analytical model to evaluate the frictional moments resulting from interactions between the ball–race and ball–cage in lubricated, low-speed DGBBs. This model employs a mixed elastohydrodynamic lubrication approach to determine the friction coefficient at the contact interfaces. This study explores how surface roughness and speed affect both ball–race and ball–cage friction torque, offering a comprehensive analysis of their influence on overall frictional torque. Additionally, the effect of surface roughness on ball–cage contact forces is investigated, enhancing the understanding of its contribution to friction torque. These insights aim to improve DGBB design and operation, maximizing performance and energy efficiency.


  • Effect of Multiple Hardening on Bearing Steel to Improve the Fatigue Life

    by P. Rajesh Kannan, Ayush Jain, Nitesh Vashishtha

  • Impact of grease physical properties on the friction torque and service life of wheel bearings

    by Ayush Jain, Shubham Soni, Nitesh Vashishtha, Deepika Shekhawat

    Wheel bearings play a crucial role in ensuring the smooth and reliable rotation of wheels in automotive applications. Grease is commonly used as a lubricant in wheel bearings. The physical properties of grease, such as viscosity, base oil type, and thickener composition, significantly influence the overall performance and longevity of wheel bearings. This study investigates the impact of grease's physical properties on wheel bearing friction torque and service life. To evaluate the effects of different grease formulations, a series of experiments were conducted using a four-ball tester, rheometer, and a custom-built test rig to measure bearing frictional torque and service life. Multiple greases with varying viscosity grades, base oil types (mineral oil, synthetic oil), and thickener compositions (lithium, diurea, and polyurea) were tested under controlled operating conditions. Friction torque measurements were obtained using a high-accuracy torque sensor, while service life was determined by monitoring the bearing life in actual endurance testing. The results indicated that grease physical properties directly affected wheel bearing friction torque and service life. Low to Medium-viscosity greases generally exhibited 35–40% lower friction torque due to enhanced lubrication film formation and reduced metal-to-metal contact however, excessively high viscosity resulted in 50–60% higher frictional torque and thereby increased energy consumption. Different base oil types showed varying friction reduction and service life level, with mineral oil in some cases showed lower frictional torque around 30–40% particularly at high temperature but with significant reduction in the service life. Furthermore, the thickener composition significantly influenced grease performance. Based on these findings, selecting the appropriate grease with optimal physical properties is crucial for minimizing friction torque and extending the service life of wheel bearings.


  • Bus Cabin Noise Predictions of Large HVAC System using Total Noise Method

    by Ambadas Bhaguji Kandekar, Andreas Jantzen, Ayush Jain, Devesh Baghel, Darshan Virupakshaia, Sohin Doshi

    HVAC system design has an accountability towards acoustic comfort of passengers of a vehicle. Owing to larger cabin volume of a bus, multiple air blowers have to be installed to ensure comfort of passengers. Such multiple blowers produce significant flow induced noise inside the cabin. For commercial success, it becomes essential to predict intensity of such a flow induced noise at very early stages in product development. Conventionally sliding mesh based CFD approach is deployed to predict flow and turbulence noise around each blower. However due to complexity, this method becomes computationally intensive resulting in cost and time inefficiency. Hence it is desirable to innovate around an alternative rapid, reliable prediction method, which ensures quick turnaround of prediction. This paper describes a unique innovative approach developed around a multiscale method where flow induced noise generated by a single blower in motion is predicted using commercial Lattice Boltzmann CFD software with a digitally scaled down HVAC system in an anechoic digital wind tunnel. These CFD predictions are used to replace all blowers with virtual stationary speakers inside digital cabin to emulate noise emanated by a large HVAC unit. Authors named this method as total Noise Multiscale Approach, in the paper. With the total multiscale approach, overall sound pressure level predicted inside the bus cabin at rear passenger ear levels are comparable with the physical test measurements and has shown fair correlation. Using this multiscale total noise method, computational cost and turnaround time has significantly reduced compared to the flow conventional resolving approach for cabin with all the blowers. This predictive total noise method found useful in designing and planning countermeasures during product development.

  • Effect of WC/C coated rolling element to improve bearing life

    by Ayush Jain, Nitesh Vashishtha, Kannan P. Rajesh

    The research is aimed to understand the effect of WC/C coating on the bearing rolling elements to improve fatigue life in surface distress conditions. The 1–1.5 microns optimized coating thickness was deposited on the steel substrate using the PVD process. The coating's physical and chemical properties were analysed by X-ray diffraction, scanning electron microscope, contact profilometer, nanoindentation hardness, and micro scratch indenter. The wear properties were compared on a ball-on-disc tribometer with and without a coated specimen. The bearing tests were performed in contaminated and clean lubrication conditions to prove the coating's effect on bearing life in surface distress conditions. Results show that coated roller bearings perform at least two times that of the standard bearing. The overall benefit of less friction and wear resistance was due to the polishing action and coating transfer mechanism of multi-layer coating which increases oil film thickness between contacts and hence improve bearing life.