Liping Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Liping Tang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Dawei Man
School of Civil Engineering, Anhui Jianzhu University 1 , Hefei 230601
6 shared publications - Qinghu Xu
School of Civil Engineering, Anhui Jianzhu University, Hefei, China
5 shared publications - Tingting Han
Anhui Provincial Key Laboratory of Intelligent Geotechnics and Disaster Prevention, Anhui Jianzhu University, Hefei, China
3 shared publications - Tingting Han
College of Civil Engineering, Anhui Jianzhu University, Hefei 230601, P. R. China
3 shared publications - Bangdong Jiang
School of Civil Engineering, Anhui Jianzhu University 1 , Hefei 230601, China
2 shared publications - Yu Zhang
School of Civil Engineering, Anhui Jianzhu University 1 , Hefei 230601, China
2 shared publications
Latest Publications
- Open Access
- 1 May 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (5)
Dynamic characteristics analysis of a multi-layer cantilever beam-type rotational piezoelectric energy harvester based on the Timoshenko beam model
This paper presents a rotational piezoelectric energy harvester (RPVEH) based on the Timoshenko beam model. The system comprises a five-layer composite cantilever beam with a tip magnet and two external magnets, creating a tri-stable potential energy function curve during vibration. The dynamic response expression of the system is derived using the generalized Hamilton’s principle, and the output power of the RPVEH is analyzed based on the harmonic balance method. The differences between the Timoshenko beam and the Euler beam models for various composite cantilever beam thicknesses are examined. Both sweep frequency and analytical results indicate that, under the same total beam thickness, the five-layer composite cantilever beam (0 < rs ≤ 0.8) captures more rotational energy over a wider speed range than the traditional three-layer composite cantilever beam (rs = 0). At a constant beam thickness (hb = 0.45 mm), as the beam length l increases, the peak power output of the five-layer composite cantilever beam is significantly improved compared to the traditional three-layer composite cantilever beam configuration: by 76%, 52%, and 19%, respectively (0.248 vs 0.141 W; 0.276 vs 0.181 W; 0.281 vs 0.237 W), accompanied by a 76% increase in power density for the 65 mm beam length. In addition, energy harvesting efficiency of the system under different substrate layer materials and thickness configurations is analyzed. It is found that using a cobalt alloy as the metal layer, which has a similar density and elastic modulus to the piezoelectric layer, significantly enhances the energy harvesting efficiency of the system.
- 1 May 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (5)
Open AccessDynamic characteristics analysis of a multi-layer cantilever beam-type rotational piezoelectric energy harvester based on the Timoshenko beam model
This paper presents a rotational piezoelectric energy harvester (RPVEH) based on the Timoshenko beam model. The system comprises a five-layer composite cantilever beam with a tip magnet and two external magnets, creating a tri-stable potential energy function curve during vibration. The dynamic response expression of the system is derived using the generalized Hamilton’s principle, and the output power of the RPVEH is analyzed based on the harmonic balance method. The differences between the Timoshenko beam and the Euler beam models for various composite cantilever beam thicknesses are examined. Both sweep frequency and analytical results indicate that, under the same total beam thickness, the five-layer composite cantilever beam (0 < rs ≤ 0.8) captures more rotational energy over a wider speed range than the traditional three-layer composite cantilever beam (rs = 0). At a constant beam thickness (hb = 0.45 mm), as the beam length l increases, the peak power output of the five-layer composite cantilever beam is significantly improved compared to the traditional three-layer composite cantilever beam configuration: by 76%, 52%, and 19%, respectively (0.248 vs 0.141 W; 0.276 vs 0.181 W; 0.281 vs 0.237 W), accompanied by a 76% increase in power density for the 65 mm beam length. In addition, energy harvesting efficiency of the system under different substrate layer materials and thickness configurations is analyzed. It is found that using a cobalt alloy as the metal layer, which has a similar density and elastic modulus to the piezoelectric layer, significantly enhances the energy harvesting efficiency of the system.
- Open Access
- 31 July 2024
- Published by University of Nis in Facta Universitatis, Series: Mechanical Engineering
- Vol. 22 (2) , 257-273
NONLINEAR DYNAMICAL CHARACTERISTICS OF HYBRID TRI-STABLE PIEZOELECTRIC ENERGY HARVESTER BASED ON ROTATIONAL MOTION
The paper presents an improved hybrid tri-stable cantilever piezoelectric energy harvester based on rotational motion, thus providing a new perspective for achieving higher efficiency in energy capture for rotational motion. The proposed system comprises a piezoelectric cantilever beam with an innovative dynamic amplifier installed at the edge of a vehicle's wheel hub. Through theoretical analysis and numerical simulations, the influence of parameters such as the mass of the tip magnetic on the piezoelectric beam, the wheel hub radius, rotational speed, and the ratio of the dynamic amplifier's spring stiffness are investigated with respect to the system's steady-state dynamic response and time-domain performance. A comparative analysis is also conducted with traditional tri-stable piezoelectric energy harvesters. The results demonstrate that the hybrid tri-stable piezoelectric energy harvester exhibits superior performance in capturing vibrational energy during rotational motion, compared to traditional tri-stable piezoelectric energy harvesters. Proper adjustments to the mass of the tip magnetic and the internal spring stiffness of the dynamic amplifier can enhance the system's output voltage and the rotational speed range of inter-well motion. Additionally, the rotational speed range of inter-well motion increases with the expansion of the wheel hub radius. However, when the rotational speed is below 100 rpm, the influence of varying the wheel hub radius on the system's output voltage is minimal.
- 31 July 2024
- Published by University of Nis in Facta Universitatis, Series: Mechanical Engineering
- Vol. 22 (2) , 257-273
Open AccessNONLINEAR DYNAMICAL CHARACTERISTICS OF HYBRID TRI-STABLE PIEZOELECTRIC ENERGY HARVESTER BASED ON ROTATIONAL MOTION
The paper presents an improved hybrid tri-stable cantilever piezoelectric energy harvester based on rotational motion, thus providing a new perspective for achieving higher efficiency in energy capture for rotational motion. The proposed system comprises a piezoelectric cantilever beam with an innovative dynamic amplifier installed at the edge of a vehicle's wheel hub. Through theoretical analysis and numerical simulations, the influence of parameters such as the mass of the tip magnetic on the piezoelectric beam, the wheel hub radius, rotational speed, and the ratio of the dynamic amplifier's spring stiffness are investigated with respect to the system's steady-state dynamic response and time-domain performance. A comparative analysis is also conducted with traditional tri-stable piezoelectric energy harvesters. The results demonstrate that the hybrid tri-stable piezoelectric energy harvester exhibits superior performance in capturing vibrational energy during rotational motion, compared to traditional tri-stable piezoelectric energy harvesters. Proper adjustments to the mass of the tip magnetic and the internal spring stiffness of the dynamic amplifier can enhance the system's output voltage and the rotational speed range of inter-well motion. Additionally, the rotational speed range of inter-well motion increases with the expansion of the wheel hub radius. However, when the rotational speed is below 100 rpm, the influence of varying the wheel hub radius on the system's output voltage is minimal.
- Open Access
Numerical Analysis of Dynamic Characteristics of an Asymmetric Tri-Stable Piezoelectric Energy Harvester under Random Vibrations in Building Structures
This study presents a novel design for a tri-stable piezoelectric vibration energy harvester with an asymmetric structure, which is enhanced with an elastic base (TPVEH + EB), meticulously designed to enhance energy extraction from irregular vibrations in architectural structures. The cornerstone of this design is the asymmetric tri-stable piezoelectric cantilever beam, distinctively arranged within a U-shaped block and fortified with an elastic foundation. A carefully positioned spring (kf)-mass (Mf) system between the U-shaped block and the beam’s fixed end significantly boosts the vertical displacement of the beam during oscillations. Utilizing Lagrange’s equations, we formulated a dynamic model for the asymmetric TPVEH + EB, examining the effects of potential well asymmetry, the stiffness of the elastic base and spring-mass system, the mass of the spring-mass system, and the tip magnet mass on the system’s nonlinear dynamic responses. Our results demonstrate that the asymmetric TPVEH + EB significantly enhances energy harvesting from low-amplitude random vibrations (1.5 g), with the output voltage of the asymmetric TPVEH + EB increasing by 30% and the output power by 25%. Extensive numerical and theoretical analyses verify that the asymmetric TPVEH + EB provides a highly efficient solution for scenarios typically hindered by low energy conversion rates. Its reliable performance under varied and unpredictable excitation conditions highlights its excellence in advanced energy harvesting applications. The improvements detailed in this research underscore the potential of the asymmetric TPVEH + EB to boost energy harvesting efficiency, particularly in powering wireless sensor nodes for structural health monitoring in buildings. By overcoming the limitations of traditional harvesters, the asymmetric TPVEH + EB ensures enhanced efficiency and reliability, making it an ideal solution for a wide range of practical applications in diverse environmental conditions within buildings.
Open AccessNumerical Analysis of Dynamic Characteristics of an Asymmetric Tri-Stable Piezoelectric Energy Harvester under Random Vibrations in Building Structures
This study presents a novel design for a tri-stable piezoelectric vibration energy harvester with an asymmetric structure, which is enhanced with an elastic base (TPVEH + EB), meticulously designed to enhance energy extraction from irregular vibrations in architectural structures. The cornerstone of this design is the asymmetric tri-stable piezoelectric cantilever beam, distinctively arranged within a U-shaped block and fortified with an elastic foundation. A carefully positioned spring (kf)-mass (Mf) system between the U-shaped block and the beam’s fixed end significantly boosts the vertical displacement of the beam during oscillations. Utilizing Lagrange’s equations, we formulated a dynamic model for the asymmetric TPVEH + EB, examining the effects of potential well asymmetry, the stiffness of the elastic base and spring-mass system, the mass of the spring-mass system, and the tip magnet mass on the system’s nonlinear dynamic responses. Our results demonstrate that the asymmetric TPVEH + EB significantly enhances energy harvesting from low-amplitude random vibrations (1.5 g), with the output voltage of the asymmetric TPVEH + EB increasing by 30% and the output power by 25%. Extensive numerical and theoretical analyses verify that the asymmetric TPVEH + EB provides a highly efficient solution for scenarios typically hindered by low energy conversion rates. Its reliable performance under varied and unpredictable excitation conditions highlights its excellence in advanced energy harvesting applications. The improvements detailed in this research underscore the potential of the asymmetric TPVEH + EB to boost energy harvesting efficiency, particularly in powering wireless sensor nodes for structural health monitoring in buildings. By overcoming the limitations of traditional harvesters, the asymmetric TPVEH + EB ensures enhanced efficiency and reliability, making it an ideal solution for a wide range of practical applications in diverse environmental conditions within buildings.
- Open Access
Analysis of Progressive Collapse Resistance in Precast Concrete Frame with a Novel Connection Method
The configuration of beam–column joints in precast concrete (PC) building structures varies widely, and different connection methods significantly affect the progressive collapse resistance of the structure. This study investigates the progressive collapse resistance of an innovative beam–column connection node frame. Finite element models of four-story, two-span space frame structures made of reinforced concrete (RC) and PC were developed using ANSYS 14.0/LS-DYNA R5.x software, employing nonlinear dynamic and static analysis to examine structural collapse behavior under bottom middle or corner column damage. Numerical results indicate that following the failure of the middle or corner column due to explosion loading, the vertical displacement and collapse rate of the PC structure with the novel connection method are less than those of the RC structure during collapse progression. Furthermore, upon removal of the middle or corner column, the residual load-carrying capacity of the PC structure with the innovative connection increased by 7% and 3.7%, respectively, compared to the RC structure. This suggests that PC structures with this type of connection demonstrate superior performance in resisting progressive collapse, offering valuable insights for future engineering applications.
Open AccessAnalysis of Progressive Collapse Resistance in Precast Concrete Frame with a Novel Connection Method
The configuration of beam–column joints in precast concrete (PC) building structures varies widely, and different connection methods significantly affect the progressive collapse resistance of the structure. This study investigates the progressive collapse resistance of an innovative beam–column connection node frame. Finite element models of four-story, two-span space frame structures made of reinforced concrete (RC) and PC were developed using ANSYS 14.0/LS-DYNA R5.x software, employing nonlinear dynamic and static analysis to examine structural collapse behavior under bottom middle or corner column damage. Numerical results indicate that following the failure of the middle or corner column due to explosion loading, the vertical displacement and collapse rate of the PC structure with the novel connection method are less than those of the RC structure during collapse progression. Furthermore, upon removal of the middle or corner column, the residual load-carrying capacity of the PC structure with the innovative connection increased by 7% and 3.7%, respectively, compared to the RC structure. This suggests that PC structures with this type of connection demonstrate superior performance in resisting progressive collapse, offering valuable insights for future engineering applications.
- Open Access
A Hybrid Tri-Stable Piezoelectric Energy Harvester with Asymmetric Potential Wells for Rotational Motion Energy Harvesting Enhancement
This paper proposes an asymmetric hybrid tri-stable piezoelectric energy harvester for rotational motion (RHTPEH). The device features an asymmetric tri-stable piezoelectric cantilever beam positioned at the edge of a rotating disk. This beam is uniquely configured with an asymmetric arrangement of magnets. Additionally, an elastic amplifier composed of a vertical and a rotating spring connects the beam’s fixed end and the disk. This setup enhances both the rotational amplitude and vertical displacement of the beam during motion. A comprehensive dynamical model of the RHTPEH was developed using Lagrange’s equations. This model facilitated an in-depth analysis of the system’s behavior under various conditions, focusing on the influence of key parameters such as the asymmetry in the potential well, the stiffness ratio of the amplifier springs, the radius of the disk, and the disk’s rotational speed on the nonlinear dynamic response of the system. The results show that the asymmetric hybrid tri-stable piezoelectric energy harvester makes it easier to harvest the vibration energy in rotational motion and has excellent power output performance compared with the symmetric tri-stable piezoelectric energy harvester. The output power magnitude of the system at higher rotational speeds increases as the radius of rotation expands, but when the rotational speed is low, the steady-state output power magnitude of the system is not sensitive to changes in the radius of rotation. Theoretical analysis and numerical simulations validate the effectiveness of the proposed asymmetric RHTPEH for energy harvesting in low-frequency rotating environments.
Open AccessA Hybrid Tri-Stable Piezoelectric Energy Harvester with Asymmetric Potential Wells for Rotational Motion Energy Harvesting Enhancement
This paper proposes an asymmetric hybrid tri-stable piezoelectric energy harvester for rotational motion (RHTPEH). The device features an asymmetric tri-stable piezoelectric cantilever beam positioned at the edge of a rotating disk. This beam is uniquely configured with an asymmetric arrangement of magnets. Additionally, an elastic amplifier composed of a vertical and a rotating spring connects the beam’s fixed end and the disk. This setup enhances both the rotational amplitude and vertical displacement of the beam during motion. A comprehensive dynamical model of the RHTPEH was developed using Lagrange’s equations. This model facilitated an in-depth analysis of the system’s behavior under various conditions, focusing on the influence of key parameters such as the asymmetry in the potential well, the stiffness ratio of the amplifier springs, the radius of the disk, and the disk’s rotational speed on the nonlinear dynamic response of the system. The results show that the asymmetric hybrid tri-stable piezoelectric energy harvester makes it easier to harvest the vibration energy in rotational motion and has excellent power output performance compared with the symmetric tri-stable piezoelectric energy harvester. The output power magnitude of the system at higher rotational speeds increases as the radius of rotation expands, but when the rotational speed is low, the steady-state output power magnitude of the system is not sensitive to changes in the radius of rotation. Theoretical analysis and numerical simulations validate the effectiveness of the proposed asymmetric RHTPEH for energy harvesting in low-frequency rotating environments.
- Open Access
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Enhancing low-orbit vibration energy harvesting by a tri-stable piezoelectric energy harvester with an innovative dynamic amplifier
Piezoelectric energy harvesting faces a primary challenge in effectively capturing low-orbit vibration energy across a broad frequency range. In this paper, we present a tri-stable piezoelectric energy harvester that incorporates a dynamic amplifier (TPEH + DM), specifically designed for efficient collection of low-orbit vibration energy. The TPEH + DM comprises a piezoelectric cantilever beam connected to an innovative dynamic amplifier at its restrained end, which enhances both the rotational and lateral displacement of the piezoelectric cantilever beam simultaneously. The governing coupled differential equations of motion for the system is derived based on the Lagrange equation, and analytical expressions for its steady-state response are obtained using the multi-scale method. The influence of factors such as the mass and the stiffness ratio of the dynamic amplifier on the steady-state dynamic output characteristics of the system is investigated using the theoretical analysis and numerical simulation. The results indicate that TPEH + DM exhibits significantly improved energy harvesting performance compared to TPEH under low-orbit external excitations. The bandwidth of inter-well motion and the TPEH + DM power output may be further increased by suitably modifying the relative stiffness between the cantilever beam and the dynamic amplifier. In addition, we analyze the time-domain behavior of the system’s output voltage using the ode45 solver under various external excitation frequencies and intensities. The results demonstrate that with appropriate adjustments to the mass of the tip magnet and the stiffness ratio of the dynamic amplifier, the proposed TPEH + DM system can harvest energy efficiently across a broad frequency range, even under low-orbit excitations.
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Open AccessEnhancing low-orbit vibration energy harvesting by a tri-stable piezoelectric energy harvester with an innovative dynamic amplifier
Piezoelectric energy harvesting faces a primary challenge in effectively capturing low-orbit vibration energy across a broad frequency range. In this paper, we present a tri-stable piezoelectric energy harvester that incorporates a dynamic amplifier (TPEH + DM), specifically designed for efficient collection of low-orbit vibration energy. The TPEH + DM comprises a piezoelectric cantilever beam connected to an innovative dynamic amplifier at its restrained end, which enhances both the rotational and lateral displacement of the piezoelectric cantilever beam simultaneously. The governing coupled differential equations of motion for the system is derived based on the Lagrange equation, and analytical expressions for its steady-state response are obtained using the multi-scale method. The influence of factors such as the mass and the stiffness ratio of the dynamic amplifier on the steady-state dynamic output characteristics of the system is investigated using the theoretical analysis and numerical simulation. The results indicate that TPEH + DM exhibits significantly improved energy harvesting performance compared to TPEH under low-orbit external excitations. The bandwidth of inter-well motion and the TPEH + DM power output may be further increased by suitably modifying the relative stiffness between the cantilever beam and the dynamic amplifier. In addition, we analyze the time-domain behavior of the system’s output voltage using the ode45 solver under various external excitation frequencies and intensities. The results demonstrate that with appropriate adjustments to the mass of the tip magnet and the stiffness ratio of the dynamic amplifier, the proposed TPEH + DM system can harvest energy efficiently across a broad frequency range, even under low-orbit excitations.