Tingting Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tingting Han has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Dawei Man
School of Civil Engineering, Anhui Jianzhu University 1 , Hefei 230601
3 shared publications - Liping Tang
School of Civil Engineering, Anhui Jianzhu University 1 , Hefei 230601
3 shared publications - Bangdong Jiang
School of Civil Engineering, Anhui Jianzhu University 1 , Hefei 230601, China
2 shared publications - Chee Wah Lim
Department of Engineering Mechanics, Zhejiang University, Hangzhou 310027, P. R. China
2 shared publications - Guanghui Xia
College of Civil Engineering, Anhui Jianzhu University, Hefei 230601, P. R. China
2 shared publications - Leiyu Chen
College of Civil Engineering, Anhui Jianzhu University, Hefei 230601, P. R. China
2 shared publications
Latest Publications
- 16 September 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Applied Mechanics
- Vol. 18 (10)
Dynamic Modeling and Performance Analysis of Complex Nonlinear Piezoelectric Energy Harvesting Systems based on Timoshenko Beam Theory
This paper establishes a coupled, electromechanical nonlinear model with a formulation for a complex piezoelectric energy harvester using Hamilton’s principle based on both Timoshenko and Euler–Bernoulli beam theories. The coupled nonlinear governing equations are derived and it incorporates geometric, inertial, damping, material and electromechanical coupling nonlinearity effects. The Galerkin method is applied to reduce the nonlinear partial differential equations, while the method of multiple scales is used to yield approximate analytical solutions for displacement, output voltage and power amplitude. Comparison between the two beam theories under varying length-to-thickness ratios reveals that material nonlinearity significantly enhances the system’s nonlinear dynamic response. Accounting for shear deformation and rotary inertia, the Timoshenko beam theory demonstrates superior accuracy, particularly for short, thick beams with low length-to-thickness ratios. The results show effective reduction of natural frequency and broadening of low-frequency applicability. Additionally, optimizing load resistance matching improves output stability and energy conversion efficiency under low-frequency resonance conditions.
- 16 September 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Applied Mechanics
- Vol. 18 (10)
Dynamic Modeling and Performance Analysis of Complex Nonlinear Piezoelectric Energy Harvesting Systems based on Timoshenko Beam Theory
This paper establishes a coupled, electromechanical nonlinear model with a formulation for a complex piezoelectric energy harvester using Hamilton’s principle based on both Timoshenko and Euler–Bernoulli beam theories. The coupled nonlinear governing equations are derived and it incorporates geometric, inertial, damping, material and electromechanical coupling nonlinearity effects. The Galerkin method is applied to reduce the nonlinear partial differential equations, while the method of multiple scales is used to yield approximate analytical solutions for displacement, output voltage and power amplitude. Comparison between the two beam theories under varying length-to-thickness ratios reveals that material nonlinearity significantly enhances the system’s nonlinear dynamic response. Accounting for shear deformation and rotary inertia, the Timoshenko beam theory demonstrates superior accuracy, particularly for short, thick beams with low length-to-thickness ratios. The results show effective reduction of natural frequency and broadening of low-frequency applicability. Additionally, optimizing load resistance matching improves output stability and energy conversion efficiency under low-frequency resonance conditions.
- Open Access
- 1 May 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (5)
Dynamic characteristics analysis of a multi-layer cantilever beam-type rotational piezoelectric energy harvester based on the Timoshenko beam model
This paper presents a rotational piezoelectric energy harvester (RPVEH) based on the Timoshenko beam model. The system comprises a five-layer composite cantilever beam with a tip magnet and two external magnets, creating a tri-stable potential energy function curve during vibration. The dynamic response expression of the system is derived using the generalized Hamilton’s principle, and the output power of the RPVEH is analyzed based on the harmonic balance method. The differences between the Timoshenko beam and the Euler beam models for various composite cantilever beam thicknesses are examined. Both sweep frequency and analytical results indicate that, under the same total beam thickness, the five-layer composite cantilever beam (0 < rs ≤ 0.8) captures more rotational energy over a wider speed range than the traditional three-layer composite cantilever beam (rs = 0). At a constant beam thickness (hb = 0.45 mm), as the beam length l increases, the peak power output of the five-layer composite cantilever beam is significantly improved compared to the traditional three-layer composite cantilever beam configuration: by 76%, 52%, and 19%, respectively (0.248 vs 0.141 W; 0.276 vs 0.181 W; 0.281 vs 0.237 W), accompanied by a 76% increase in power density for the 65 mm beam length. In addition, energy harvesting efficiency of the system under different substrate layer materials and thickness configurations is analyzed. It is found that using a cobalt alloy as the metal layer, which has a similar density and elastic modulus to the piezoelectric layer, significantly enhances the energy harvesting efficiency of the system.
- 1 May 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (5)
Open AccessDynamic characteristics analysis of a multi-layer cantilever beam-type rotational piezoelectric energy harvester based on the Timoshenko beam model
This paper presents a rotational piezoelectric energy harvester (RPVEH) based on the Timoshenko beam model. The system comprises a five-layer composite cantilever beam with a tip magnet and two external magnets, creating a tri-stable potential energy function curve during vibration. The dynamic response expression of the system is derived using the generalized Hamilton’s principle, and the output power of the RPVEH is analyzed based on the harmonic balance method. The differences between the Timoshenko beam and the Euler beam models for various composite cantilever beam thicknesses are examined. Both sweep frequency and analytical results indicate that, under the same total beam thickness, the five-layer composite cantilever beam (0 < rs ≤ 0.8) captures more rotational energy over a wider speed range than the traditional three-layer composite cantilever beam (rs = 0). At a constant beam thickness (hb = 0.45 mm), as the beam length l increases, the peak power output of the five-layer composite cantilever beam is significantly improved compared to the traditional three-layer composite cantilever beam configuration: by 76%, 52%, and 19%, respectively (0.248 vs 0.141 W; 0.276 vs 0.181 W; 0.281 vs 0.237 W), accompanied by a 76% increase in power density for the 65 mm beam length. In addition, energy harvesting efficiency of the system under different substrate layer materials and thickness configurations is analyzed. It is found that using a cobalt alloy as the metal layer, which has a similar density and elastic modulus to the piezoelectric layer, significantly enhances the energy harvesting efficiency of the system.
- 17 October 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 26 (04)
Performance Analysis of Low-Frequency Piezoelectric Energy Harvesting Systems with Multiple Nonlinear Factors and Bidirectional Excitations
With the swift advancement of microelectronic technology and MEMS, piezoelectric energy harvesting technology has garnered escalating attention due to its eco-friendly and sustainable attributes. In this paper, a bimorph piezoelectric energy harvesting system considering multi-nonlinearity complex factors is devised, and the approximate analytical solutions for vertical displacement, output voltage, and output power of the entire system are derived. Owing to inherent nonlinear softening characteristic of material nonlinearity, the effective frequency bandwidth of the energy harvesting system is significantly broadened. The result indicates that under horizontal excitation ranging from 0.2[ ]g to 0.3[ ]g, the peak output voltage of the energy harvesting system with a frequency of 3.2254[ ]Hz (open circuit) increases approximately by 7.9 times. At another frequency of 3.2054[ ]Hz (short circuit), the peak output voltage amplitude is multiplied by approximately 6.5 times. Considering material nonlinearity, it can be concluded that the system energy harvesting efficiency at low frequency can be greatly improved. The numerical result obtained is not only more accurate, but it is also more consistent with real situations. This conclusion provides a theoretical basis for research and analysis of similar systems in low-frequency ranges.
- 17 October 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 26 (04)
Performance Analysis of Low-Frequency Piezoelectric Energy Harvesting Systems with Multiple Nonlinear Factors and Bidirectional Excitations
With the swift advancement of microelectronic technology and MEMS, piezoelectric energy harvesting technology has garnered escalating attention due to its eco-friendly and sustainable attributes. In this paper, a bimorph piezoelectric energy harvesting system considering multi-nonlinearity complex factors is devised, and the approximate analytical solutions for vertical displacement, output voltage, and output power of the entire system are derived. Owing to inherent nonlinear softening characteristic of material nonlinearity, the effective frequency bandwidth of the energy harvesting system is significantly broadened. The result indicates that under horizontal excitation ranging from 0.2[ ]g to 0.3[ ]g, the peak output voltage of the energy harvesting system with a frequency of 3.2254[ ]Hz (open circuit) increases approximately by 7.9 times. At another frequency of 3.2054[ ]Hz (short circuit), the peak output voltage amplitude is multiplied by approximately 6.5 times. Considering material nonlinearity, it can be concluded that the system energy harvesting efficiency at low frequency can be greatly improved. The numerical result obtained is not only more accurate, but it is also more consistent with real situations. This conclusion provides a theoretical basis for research and analysis of similar systems in low-frequency ranges.
- Open Access
- 31 July 2024
- Published by University of Nis in Facta Universitatis, Series: Mechanical Engineering
- Vol. 22 (2) , 257-273
NONLINEAR DYNAMICAL CHARACTERISTICS OF HYBRID TRI-STABLE PIEZOELECTRIC ENERGY HARVESTER BASED ON ROTATIONAL MOTION
The paper presents an improved hybrid tri-stable cantilever piezoelectric energy harvester based on rotational motion, thus providing a new perspective for achieving higher efficiency in energy capture for rotational motion. The proposed system comprises a piezoelectric cantilever beam with an innovative dynamic amplifier installed at the edge of a vehicle's wheel hub. Through theoretical analysis and numerical simulations, the influence of parameters such as the mass of the tip magnetic on the piezoelectric beam, the wheel hub radius, rotational speed, and the ratio of the dynamic amplifier's spring stiffness are investigated with respect to the system's steady-state dynamic response and time-domain performance. A comparative analysis is also conducted with traditional tri-stable piezoelectric energy harvesters. The results demonstrate that the hybrid tri-stable piezoelectric energy harvester exhibits superior performance in capturing vibrational energy during rotational motion, compared to traditional tri-stable piezoelectric energy harvesters. Proper adjustments to the mass of the tip magnetic and the internal spring stiffness of the dynamic amplifier can enhance the system's output voltage and the rotational speed range of inter-well motion. Additionally, the rotational speed range of inter-well motion increases with the expansion of the wheel hub radius. However, when the rotational speed is below 100 rpm, the influence of varying the wheel hub radius on the system's output voltage is minimal.
- 31 July 2024
- Published by University of Nis in Facta Universitatis, Series: Mechanical Engineering
- Vol. 22 (2) , 257-273
Open AccessNONLINEAR DYNAMICAL CHARACTERISTICS OF HYBRID TRI-STABLE PIEZOELECTRIC ENERGY HARVESTER BASED ON ROTATIONAL MOTION
The paper presents an improved hybrid tri-stable cantilever piezoelectric energy harvester based on rotational motion, thus providing a new perspective for achieving higher efficiency in energy capture for rotational motion. The proposed system comprises a piezoelectric cantilever beam with an innovative dynamic amplifier installed at the edge of a vehicle's wheel hub. Through theoretical analysis and numerical simulations, the influence of parameters such as the mass of the tip magnetic on the piezoelectric beam, the wheel hub radius, rotational speed, and the ratio of the dynamic amplifier's spring stiffness are investigated with respect to the system's steady-state dynamic response and time-domain performance. A comparative analysis is also conducted with traditional tri-stable piezoelectric energy harvesters. The results demonstrate that the hybrid tri-stable piezoelectric energy harvester exhibits superior performance in capturing vibrational energy during rotational motion, compared to traditional tri-stable piezoelectric energy harvesters. Proper adjustments to the mass of the tip magnetic and the internal spring stiffness of the dynamic amplifier can enhance the system's output voltage and the rotational speed range of inter-well motion. Additionally, the rotational speed range of inter-well motion increases with the expansion of the wheel hub radius. However, when the rotational speed is below 100 rpm, the influence of varying the wheel hub radius on the system's output voltage is minimal.
- Open Access
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Enhancing low-orbit vibration energy harvesting by a tri-stable piezoelectric energy harvester with an innovative dynamic amplifier
Piezoelectric energy harvesting faces a primary challenge in effectively capturing low-orbit vibration energy across a broad frequency range. In this paper, we present a tri-stable piezoelectric energy harvester that incorporates a dynamic amplifier (TPEH + DM), specifically designed for efficient collection of low-orbit vibration energy. The TPEH + DM comprises a piezoelectric cantilever beam connected to an innovative dynamic amplifier at its restrained end, which enhances both the rotational and lateral displacement of the piezoelectric cantilever beam simultaneously. The governing coupled differential equations of motion for the system is derived based on the Lagrange equation, and analytical expressions for its steady-state response are obtained using the multi-scale method. The influence of factors such as the mass and the stiffness ratio of the dynamic amplifier on the steady-state dynamic output characteristics of the system is investigated using the theoretical analysis and numerical simulation. The results indicate that TPEH + DM exhibits significantly improved energy harvesting performance compared to TPEH under low-orbit external excitations. The bandwidth of inter-well motion and the TPEH + DM power output may be further increased by suitably modifying the relative stiffness between the cantilever beam and the dynamic amplifier. In addition, we analyze the time-domain behavior of the system’s output voltage using the ode45 solver under various external excitation frequencies and intensities. The results demonstrate that with appropriate adjustments to the mass of the tip magnet and the stiffness ratio of the dynamic amplifier, the proposed TPEH + DM system can harvest energy efficiently across a broad frequency range, even under low-orbit excitations.
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Open AccessEnhancing low-orbit vibration energy harvesting by a tri-stable piezoelectric energy harvester with an innovative dynamic amplifier
Piezoelectric energy harvesting faces a primary challenge in effectively capturing low-orbit vibration energy across a broad frequency range. In this paper, we present a tri-stable piezoelectric energy harvester that incorporates a dynamic amplifier (TPEH + DM), specifically designed for efficient collection of low-orbit vibration energy. The TPEH + DM comprises a piezoelectric cantilever beam connected to an innovative dynamic amplifier at its restrained end, which enhances both the rotational and lateral displacement of the piezoelectric cantilever beam simultaneously. The governing coupled differential equations of motion for the system is derived based on the Lagrange equation, and analytical expressions for its steady-state response are obtained using the multi-scale method. The influence of factors such as the mass and the stiffness ratio of the dynamic amplifier on the steady-state dynamic output characteristics of the system is investigated using the theoretical analysis and numerical simulation. The results indicate that TPEH + DM exhibits significantly improved energy harvesting performance compared to TPEH under low-orbit external excitations. The bandwidth of inter-well motion and the TPEH + DM power output may be further increased by suitably modifying the relative stiffness between the cantilever beam and the dynamic amplifier. In addition, we analyze the time-domain behavior of the system’s output voltage using the ode45 solver under various external excitation frequencies and intensities. The results demonstrate that with appropriate adjustments to the mass of the tip magnet and the stiffness ratio of the dynamic amplifier, the proposed TPEH + DM system can harvest energy efficiently across a broad frequency range, even under low-orbit excitations.