DSDeepak Sharma

Deepak Sharma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Deepak Sharma has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • From Monolayer MoS2 FETs to MoS2−MoO2 Nanoheterostructures: Enhanced Self-Powered Visible-Light and NO2 Sensing

    by Dipanjana Mondal, Deepak Sharma, Navakanta Bhat, Vinayak B. Kamble

    Self-powered multifunctional sensors require internal fields that can separate photocarriers and transduce surface adsorption events without continuous external bias. Here, we show that chemical vapor deposition (CVD) growth conditions can tune the morphology of nanostructured molybdenum disulfide (MoS2), forming sulfur-deficient quadrilateral flakes with coexisting molybdenum-sulfur (Mo−S) and molybdenum-oxygen (Mo−O) chemical environments, consistent with MoS2−MoO2 (MSMO) phase coexistence. Comprehensive structural, optical, and chemical characterization confirms the distinct growth regimes of monolayer, few-layer, dendritic, and quadrilateral flake and verifies the morphology and composition of the resulting phases. Devices fabricated from pristine MoS2, gate-modulated MoS2, and the MSMO quadrilateral-flake film were compared under visible illumination and NO2 exposure. The monolayer MoS2 FET exhibits n-type gate modulation with an on/off ratio of ∼ 4 − 7, field-effect mobility of ∼0.2−0.7 cm2V−1s−1, threshold voltage of ∼1.5 − 3.1 V, and subthreshold swing of ∼5 − 8 V.dec−1, indicating conventional but weakly gate-controlled CVD MoS2 transistor behavior. The heterostructure device outperforms the monolayer MoS2 FET device, delivering responsivity of 100 A/W, detectivity of 1012 Jones (at 630 nm, 30 mW optical power), response/recovery times of 200 ms, and operation over the visible spectrum at zero bias. The same junction architecture also enables room-temperature NO2 sensing with a sub-ppm (∼0.1 PPM) limit of detection (LOD) at a low bias of 0.5 V, and this decreases further with illumination. The device exhibits a zero-bias sensing response with a few ppm LOD (∼5 ppm), whereas pristine MoS2 control devices require a higher applied bias and exhibit weaker modulation. Thus, internal interface field enables a faster and measurable self-powered photodetection and NO2 sensing than external electrostatic gating.

  • Heterogeneous Molecular‐Silicon Integration for Precision Neuromorphic Computing

    by Jitthu Joseph, Lohit T, Harivignesh S, Deepak Sharma, Pallavi Gaur, Nivedita Singh, Deepak Nair, Navakanta Bhat, Sreetosh Goswami

    While an expanding repertoire of materials exhibits neuromorphic functionality, translating these advances into scalable hardware integrated with silicon remains a formidable challenge. Monolithic integration, though ultimately desirable, is rarely tractable at early stages of material development. Progress is therefore often assessed through idealized simulations that overlook system‐level constraints and non‐idealities such as device variability, mixed‐signal conversions, peripheral circuit noise, and energy overhead, yielding projections that can mislead. Here we present a heterogeneously integrated platform as a necessary stepping‐stone toward scalable molecular‐silicon hardware—a 64 × 64 molecular crossbar coupled with custom Si‐circuitry in which every interface and signal pathway is explicitly defined and directly measured, yielding a realistic map of the design space for further scale‐up. We demonstrate a one‐step vector–matrix multiplication with > 12‐bit precision, ∼73 dB signal‐to‐noise ratio, ∼80‐ns write speeds, and high write accuracy across 10 000 programming cycles without correction loops, a substantial advance over the state of the art in dot‐product engines. Using this platform, we execute workloads spanning signal and image processing, biomarker detection and tracking, and cryptographic operations. This work establishes the foundation on which subsequent scale‐up strategies, including monolithic molecular–silicon integration, can be designed and assessed.

  • Direct Printing of Electronics on Flexible Porous Substrates

    by Bheema Sankar Reddy, Chandantaru Dey Modak, Deepak Sharma, Rutvik Lathia, Abhirami Santhosh, Saurabh Kumar, Navakanta Bhat, Prosenjit Sen

    Porous substrates such as paper and fabric are foundational to the future of flexible electronics. Over 60% of flexible electronics applications, including wearable health monitors, environmental sensors, and e‐textiles, rely on porous substrates due to their breathability, flexibility, and affordability. However, ink spreading, solvent penetration, and substrate swelling significantly challenge their large‐scale fabrication. Here, we utilize Drop Impact Printing (DIP), a nozzle‐free technique that reliably deposits highly concentrated inks (up to 70% mass loading) onto untreated porous substrates, preserving their intrinsic properties. DIP effectively reduces lateral ink spread and penetration by precisely ejecting microdroplets via a sieve‐impact mechanism, enhancing particle retention, conductivity, and mechanical durability under bending. Microsupercapacitors and humidity sensors fabricated using DIP exhibit remarkable performance improvements. Specifically, the 70% mass‐loaded microsupercapacitor shows approximately a 41‐fold increase in areal capacitance compared to the 10% loading at high scan rates, while humidity sensors demonstrate nearly a 60% increase in maximum response when ink concentration rises from 10% to 55%. Furthermore, we demonstrate an integrated, self‐powered humidity‐sensing system, along with a wireless humidity‐sensing setup fabricated entirely using DIP, underscoring its applicability to real‐world flexible electronics.


  • Open Access

    Synthesis of nanostructured cubic phase SnO2 thin film and its trace-level sensing of CO gas

    by Keshav Kumar Sharma, Deepak Sharma, Danil W. Boukhvalov, Upanya Khandelwal, Pavan Nukala, Navakanta Bhat, Ramesh Karuppannan

    In this study, we report the fabrication of a cubic phase SnO2-based thin film gas sensor with excellent sensitivity and selectivity for carbon monoxide (CO) gas at room temperature, with a high response of 25606% achieved at 2 ppm CO gas concentration, and a detection limit down to 1 ppb. Cubic phase SnO2 thin films are synthesized using a simple sol-gel process, followed by spin coating. Our synthesis technique allows for stabilizing the cubic phase of SnO2, confirmed through XRD and TEM studies, which is otherwise reported at high pressures and temperatures. Further, our DFT simulations show that the cubic phase of SnO2 nanoparticles has a lower energy barrier for CO adsorption and desorption than the more common tetragonal phase. The low-voltage and ambient operating conditions of the sensor reported in this study make it highly practical for widespread use, thus offering a promising solution to the growing need for efficient and affordable gas sensing applications, including environmental monitoring, industrial safety, and medical diagnosis.


  • Native Oxide MoO₂– MoSe₂ Heterostructure‐Based Self‐Powered Gas Sensor for Selective NO₂ and H₂ Detection

    by Dipanjana Mondal, Deepak Sharma, Karthik R, Ashik Manoj N, C. S. Tiwary, Navakanta Bhat, Vinayak B. Kamble

    A single‐step chemical vapor deposition method is reported to synthesize native oxide metal ‐semiconductor MoO₂–MoSe₂ heterostructure flakes for self‐powered gas sensing. Two types of flakes, S1 and S2, with distinct compositions, are analyzed using Raman, photoluminescence spectroscopy, Atomic Force Microscopy, X‐ray and UV Photoelectron Spectroscopy, and High‐Resolution Transmission Electron Microscopy (HRTEM). TEM and Energy Dispersive Spectroscopy (EDS) mapping confirm a clear interface and compositional gradation in the heterostructures. Sample S1, predominantly MoO₂ and highly metallic, exhibits minimal photoresponse but shows selective H₂ detection at room temperature. In contrast, S2, with a top‐down MoO₂–MoSe₂ structure, demonstrates broadband optical photoresponse and high sensitivity toward NO₂ with a detection limit of 10 ppm. The enhanced performance at low (few mili volts) or zero bias is attributed to photocarriers generated at the heterojunction and NO 2 /MoSe 2 /MoO 2 interface‐driven interactions under visible light exposure. The response is further found to be enhanced significantly in the presence of humidity, making it suitable for detection in humid environments. This interface engineering strategy enables the development of room‐temperature, self‐powered gas sensors with high selectivity and sensitivity, paving the way for future nanoelectronic and MEMS‐integrable sensing devices.


  • Anion-Exchange-Mediated Synthesis of Hollow 2D Layered Materials and Heterostructures: Mechanism and Room-Temperature Gas-Sensing Properties

    by Rajeev Kumar Rai, Naveen Goyal, Deepak Sharma, Ranit Ram, Koushik Jagadish, Navakanta Bhat, Narayanan Ravishankar


  • Open Access

    Synthesis of Nanostructured Cubic Phase SnO2 Thin Film and Its Trace-Level Sensing of CO Gas

    by Ramesh Karuppannan, Keshav Sharma, Deepak Sharma, Danil Bukhvalov, Upanya Khandelwal, Pavan Nukala, Navakanta Bhat

    In this study, we report the fabrication of a cubic phase SnO 2 based thin film gas sensor with excellent sensitivity and selectivity for carbon monoxide (CO) gas at room temperature, with a high response of 25606% achieved at 2 ppm CO gas concentration, and a detection limit down to 1ppb. The cubic phase SnO 2 thin films were synthesized via a simple sol-gel method. Our synthesis technique allows for stabilizing the cubic phase of SnO 2 , confirmed through XRD and TEM studies, which is otherwise reported at high pressures and temperatures. Further, our DFT simulations show that the cubic phase of SnO 2 nanoparticles has a lower energy barrier for CO adsorption and desorption than the more common tetragonal phase. The low-voltage and ambient operating conditions of the sensor reported in this study make it highly practical for widespread use, thus offering a promising solution to the growing need for efficient and affordable gas sensing applications, including environmental monitoring, industrial safety, and medical diagnosis.


  • Open Access

    Anion-exchange Mediated Synthesis of Hollow 2D Layered Materials and Heterostructures: Mechanism and Room-Temperature Gas Sensing Properties

    by Rajeev Kumar Rai, Naveen Goyal, Deepak Sharma, Ranit Ram, Koushik Jagadish, Navakanta Bhat, N. Ravishankar

    The designing of nanostructures with unique morphologies and enhanced functionalities is a cornerstone of modern materials science. Ion exchange reactions in inorganic crystals offer a versatile approach for precisely controlling the composition, morphology and properties of the materials through stepwise transformations. In this study, we report the anion exchange-mediated conversion of 2D layered material SnS2 into SnSe2, with SnS2-SnSe2 lateral heterostructures as intermediates. This transformation, driven by the disparate diffusion rates of S²⁻ and Se²⁻ ions, leads to the generation of hexagonal nanorings of SnSe2 (inaccessible by direct synthetic routes) via the Kirkendall effect. By carefully balancing the diffusion kinetics through concentration control, we also successfully synthesized continuous SnSe2 nanosheets. To elucidate the anion exchange mechanism, we conducted a comprehensive investigation using electron microscopy techniques, varying parameters such as time, precursor concentration, and reagents. Our findings revealed that the exchange process initiates at the edges of the template SnS2 nanosheets and progresses inward. Cross-sectional atomic-resolution electron microscopy of the interfaces and layer stacking in the SnS2-SnSe2 heterostructure uncovered numerous defects, attributed to ion migration and lattice mismatch, which were not detectable in planar views. Furthermore, as-synthesized materials are explored for gas-sensing applications. Our anion-exchange-derived SnS2-SnSe2 heterostructure and SnSe2 exhibited exceptional selectivity and sensitivity towards NO2 gas (response > 700%) at room temperature comparable to state-of-art sensors, significantly outperforming the pristine SnS2 material, which required elevated temperatures (150°C) for optimal response. This study underscores the potential of anion exchange as a powerful tool for designing novel nanomaterials with tailored properties and applications, particularly in the realm of gas sensing.

  • Linear symmetric self-selecting 14-bit kinetic molecular memristors

    by Deepak Sharma, Santi Prasad Rath, Bidyabhusan Kundu, Anil Korkmaz, Harivignesh S, Damien Thompson, Navakanta Bhat, Sreebrata Goswami, R Stanley Williams, Sreetosh Goswami

    Artificial Intelligence (AI) is the domain of large resource-intensive data centres that limit access to a small community of developers1,2. Neuromorphic hardware promises greatly improved space and energy efficiency for AI but is presently only capable of low-accuracy operations, such as inferencing in neural networks3,4,5. Core computing tasks of signal processing, neural network training and natural language processing demand far higher computing resolution, beyond that of individual neuromorphic circuit elements6,7,8. Here we introduce an analog molecular memristor based on a Ru-complex of an azo-aromatic ligand with 14-bit resolution. Precise kinetic control over a transition between two thermodynamically stable molecular electronic states facilitates 16,520 distinct analog conductance levels, which can be linearly and symmetrically updated or written individually in one time step, substantially simplifying the weight update procedure over existing neuromorphic platforms3. The circuit elements are unidirectional, facilitating a selector-less 64 × 64 crossbar-based dot-product engine that enables vector–matrix multiplication, including Fourier transform, in a single time step. We achieved more than 73 dB signal-to-noise-ratio, four orders of magnitude improvement over the state-of-the-art methods9,10,11, while consuming 460× less energy than digital computers12,13. Accelerators leveraging these molecular crossbars could transform neuromorphic computing, extending it beyond niche applications and augmenting the core of digital electronics from the cloud to the edge12,13.


  • Large electro-opto-mechanical coupling in VO2 neuristors

    by Upanya Khandelwal, Rama Satya Sandilya, Rajeev Kumar Rai, Deepak Sharma, Smruti Rekha Mahapatra, Debasish Mondal, Navakanta Bhat, Naga Phani Aetkuri, Sushobhan Avasthi, Saurabh Chandorkar, et al.

    Biological neurons are electro-mechanical systems, where the generation and propagation of an action potential are coupled to the generation and transmission of an acoustic wave. Neuristors, such as VO2, characterized by insulator-metal transition (IMT) and negative differential resistance, can be engineered as self-oscillators, which are good approximations of biological neurons in the domain of electrical signals. In this study, we show that these self-oscillators are coupled electro-opto-mechanical systems, with better energy conversion coefficients than the conventional electro-mechanical or electro-optical materials. This is due to the significant contrast in the material's resistance, optical refractive index, and density across the induced temperature range in a Joule heating driven IMT. We carried out laser interferometry to measure the opto-mechanical response while simultaneously driving the devices electrically into self-oscillations of different kinds. We analyzed films of various thicknesses, engineered device geometry, and performed analytical modeling to decouple the effects of refractive index change vis-à-vis mechanical strain in the interferometry signal. We show that the effective piezoelectric coefficient (d13*) for our neuristor devices is 660 ± 20 pm/V, with a 31% internal energy conversion efficiency, making them viable alternatives to Pb-based piezoelectrics for MEMS applications. Furthermore, we show that the effective electro-optic coefficient (r13*) is ∼22 nm/V, which is much larger than that in thin-film and bulk Pockels materials.