Hongsheng Niu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hongsheng Niu has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Binfeng Yun
Southeast University
5 shared publications - Guohua Hu
Advanced Photonics Center, School of Electronic Science and Engineering, Southeast University , Nanjing 210096
4 shared publications Yifei Chen
Advanced Photonics Center, School of Electronic Science and Engineering, Southeast University, Nanjing, China
4 shared publications- Shangqing Shi
Advanced Photonics Center, School of Electronic Science & Engineering, Southeast University, Nanjing, China
3 shared publications Wei Cheng
Advanced Photonics Center, School of Electronic Science & Engineering, Southeast University, Nanjing, China
3 shared publications- Yiping Cui
Advanced Photonics Center, School of Electronic Science and Engineering, Southeast University, Nanjing, China
3 shared publications
Latest Publications
- 6 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (16) , 7807-7818
A Simple Multi-Functional Optical Chip With High Reconfigurability
Unlike the application-specific optical chips, reconfigurable optical chip can offer various optical signal processing functions, which can dynamically meet the various requirements in different application scenarios. To achieve multiple functions, relatively complex optical chip configuration is usually needed, which poses the difficulty to control. Here, we propose a highly reconfigurable integrated silicon nitride optical chip by simply cascading Mach-Zehnder interferometers (MZIs) and coupled resonator optical waveguide (CROW). By dynamically reconfiguring the optical propagation path in the proposed chip, as many as six different types of optical functional structures have been obtained, which can achieve optical switch with ultra-high extinction ratio (ER), box-like interleaver, optical filters with tunable bandwidth, spectral shape and free spectral range (FSR) reconfigurabilities. Experimental results show that optical switch achieves an ER of 52 dB, optical interleaver achieves the shape factor about 1.32, in-band ripple of 0.2 dB and crosstalk of -21 dB. Meanwhile, as a reconfigurable optical filter, various spectral shapes such as Fano, flat-top, Lorentz, triangular, sinusoidal, square, tangent-like responses have also been obtained. In addition, by adopting different modulation schemes, bandstop microwave photonic filters (MPFs), lowpass MPFs and bandpass MPFs have been demonstrated. Our proposed chip could provide a simple and highly reconfigurable solution for various applications in optical communication, sensing and microwave photonics signal processing systems.
- 6 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (16) , 7807-7818
A Simple Multi-Functional Optical Chip With High Reconfigurability
Unlike the application-specific optical chips, reconfigurable optical chip can offer various optical signal processing functions, which can dynamically meet the various requirements in different application scenarios. To achieve multiple functions, relatively complex optical chip configuration is usually needed, which poses the difficulty to control. Here, we propose a highly reconfigurable integrated silicon nitride optical chip by simply cascading Mach-Zehnder interferometers (MZIs) and coupled resonator optical waveguide (CROW). By dynamically reconfiguring the optical propagation path in the proposed chip, as many as six different types of optical functional structures have been obtained, which can achieve optical switch with ultra-high extinction ratio (ER), box-like interleaver, optical filters with tunable bandwidth, spectral shape and free spectral range (FSR) reconfigurabilities. Experimental results show that optical switch achieves an ER of 52 dB, optical interleaver achieves the shape factor about 1.32, in-band ripple of 0.2 dB and crosstalk of -21 dB. Meanwhile, as a reconfigurable optical filter, various spectral shapes such as Fano, flat-top, Lorentz, triangular, sinusoidal, square, tangent-like responses have also been obtained. In addition, by adopting different modulation schemes, bandstop microwave photonic filters (MPFs), lowpass MPFs and bandpass MPFs have been demonstrated. Our proposed chip could provide a simple and highly reconfigurable solution for various applications in optical communication, sensing and microwave photonics signal processing systems.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (24) , 8771-8777
A Low Loss Silicon Photonic Switchable Optical Delay Line With Low Power Consumption
Optical delay line (ODL) featuring low power consumption and low loss are very demanding for various applications such as optical communications, optical coherence tomography, and microwave photonic signal processing, etc. In this paper, we design, fabricate, and characterize a low loss silicon photonic switchable optical delay line chip with low power consumption based on well-designed spiral thermo-optical switches (STOS) and multi-mode spiral delay waveguide (MMSDW). The proposed 5-Bit silicon ODL can achieve a maximum delay of 1535.52 ps, with an average power consumption as low as 16.29 mW, and a low optical loss delay ratio of 0.006 dB/ps. It is noteworthy that all the optical switches in the proposed ODL have an extinction ratio larger than 25 dB with a low switching power below 2.7 mW, which is almost one order of magnitude lower than other reported silicon ODL. Furthermore, a compact footprint as small as 1.7 mm × 6.6 mm is achieved by our optimized design.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (24) , 8771-8777
A Low Loss Silicon Photonic Switchable Optical Delay Line With Low Power Consumption
Optical delay line (ODL) featuring low power consumption and low loss are very demanding for various applications such as optical communications, optical coherence tomography, and microwave photonic signal processing, etc. In this paper, we design, fabricate, and characterize a low loss silicon photonic switchable optical delay line chip with low power consumption based on well-designed spiral thermo-optical switches (STOS) and multi-mode spiral delay waveguide (MMSDW). The proposed 5-Bit silicon ODL can achieve a maximum delay of 1535.52 ps, with an average power consumption as low as 16.29 mW, and a low optical loss delay ratio of 0.006 dB/ps. It is noteworthy that all the optical switches in the proposed ODL have an extinction ratio larger than 25 dB with a low switching power below 2.7 mW, which is almost one order of magnitude lower than other reported silicon ODL. Furthermore, a compact footprint as small as 1.7 mm × 6.6 mm is achieved by our optimized design.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3260-3268
Non-Invasive Calibration Method for Optical Switching Delay Line Based on Iterative Optimization
Optical switching delay line (OSDL) is a structure consisting of cascaded optical switches and optical waveguides with different lengths. Different propagation paths can be selected to obtain the desired optical delay by controlling the optical switches in their “through” or “cross” states. Because of its high delay accuracy, large bandwidth and effective control, OSDL has become one of the key components of the microwave photonic beamforming system. However, calibrations of the “through” and “cross” states of all the optical switches are necessary due to fabrication errors before the OSDL can be used in real applications. At present, four typical calibration methods have been demonstrated: adding optical power monitoring taps, variable optical attenuators (VOAs), or phase shifters (PSs) into the OSDL chip, and measuring the transmission spectra of the chip under different driving voltages. However, adding additional optical power monitoring taps, VOAs, or PSs will increase the insertion loss and complexity of the OSDL chip, while the calibration method based on transmission spectra is still complicated and time-consuming. In this paper, a non-invasive calibration method for OSDL based on iterative optimization is proposed. Only the final output port of the OSDL chip is used as the optical power monitor, and the control voltages for all the optical switches in the “through” and “cross” states are iteratively optimized with the goal of achieving the largest output extinction ratio at the output port. As a proof of concept, we calibrated a 5-Bit silicon OSDL chip by using the proposed iterative optimization method, and all the delay states of the OSDL chip were measured, which were in good agreement with those of ODSL calibrated by using the optical power monitoring taps.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3260-3268
Non-Invasive Calibration Method for Optical Switching Delay Line Based on Iterative Optimization
Optical switching delay line (OSDL) is a structure consisting of cascaded optical switches and optical waveguides with different lengths. Different propagation paths can be selected to obtain the desired optical delay by controlling the optical switches in their “through” or “cross” states. Because of its high delay accuracy, large bandwidth and effective control, OSDL has become one of the key components of the microwave photonic beamforming system. However, calibrations of the “through” and “cross” states of all the optical switches are necessary due to fabrication errors before the OSDL can be used in real applications. At present, four typical calibration methods have been demonstrated: adding optical power monitoring taps, variable optical attenuators (VOAs), or phase shifters (PSs) into the OSDL chip, and measuring the transmission spectra of the chip under different driving voltages. However, adding additional optical power monitoring taps, VOAs, or PSs will increase the insertion loss and complexity of the OSDL chip, while the calibration method based on transmission spectra is still complicated and time-consuming. In this paper, a non-invasive calibration method for OSDL based on iterative optimization is proposed. Only the final output port of the OSDL chip is used as the optical power monitor, and the control voltages for all the optical switches in the “through” and “cross” states are iteratively optimized with the goal of achieving the largest output extinction ratio at the output port. As a proof of concept, we calibrated a 5-Bit silicon OSDL chip by using the proposed iterative optimization method, and all the delay states of the OSDL chip were measured, which were in good agreement with those of ODSL calibrated by using the optical power monitoring taps.
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (8) , 2848-2858
Compact Optical Beamforming Chip Using Broadband Continuously Tunable Delay Lines
In this work, we present a wideband 1×4 continuously tunable microwave photonic beamforming chip based on integrated optical switching delay lines (OSDLs) cascade with properly designed tunable asymmetry Mach-Zehnder interferometer (AMZI). Simulation and experiment were conducted to achieve over 25 GHz bandwidth continuously tunable delay (0 ps ∼ 3.54 ps), which can sufficiently cover a 5-bit silicon OSDL's discrete delay step (3.54 ps). Simulations on microwave photonic beamforming were also carried out. Additionally, to enhance the compactness of the microwave photonic beamforming chip, we introduce a non-invasive calibration method that eliminates the need for optical power monitoring tap after each optical switch, this approach can reduce the chip's footprint and optical I/O ports by approximately 50%.
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (8) , 2848-2858
Compact Optical Beamforming Chip Using Broadband Continuously Tunable Delay Lines
In this work, we present a wideband 1×4 continuously tunable microwave photonic beamforming chip based on integrated optical switching delay lines (OSDLs) cascade with properly designed tunable asymmetry Mach-Zehnder interferometer (AMZI). Simulation and experiment were conducted to achieve over 25 GHz bandwidth continuously tunable delay (0 ps ∼ 3.54 ps), which can sufficiently cover a 5-bit silicon OSDL's discrete delay step (3.54 ps). Simulations on microwave photonic beamforming were also carried out. Additionally, to enhance the compactness of the microwave photonic beamforming chip, we introduce a non-invasive calibration method that eliminates the need for optical power monitoring tap after each optical switch, this approach can reduce the chip's footprint and optical I/O ports by approximately 50%.