ASAlexander Spaett

Alexander Spaett

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alexander Spaett has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fast SPAD-array timing-error correction with time-referencing for non-line-of-sight imaging

    by Alexander Spaett, Stéphane Schertzer, Thai-An Nguyen, Martin Laurenzis

    We present a fast calibration and correction algorithm to compensate for timing errors in time-correlated single-photon counting (TCSPC) with single-photon avalanche diode (SPAD) array detectors. Manufacturing tolerances cause pixel-dependent variations in mean time-bin width (≈6%) and bin-to-bin fluctuation (≈0.6%), leading to temporal broadening when signals are combined. Our method addresses these errors with a pre-computed lookup table that equalises pixel-dependent time-bin widths. A second stage then establishes an absolute time reference for non-line-of-sight (NLOS) reconstruction by exploiting intrinsic line-of-sight (LOS) signal features, eliminating the need for external calibration. The approach improves temporal alignment and facilitates more accurate NLOS reconstructions, as demonstrated in two non-confocal experimental setups and with simulated confocal data.


  • Open Access

    Optimal speckle size and signal processing for displacement measurements using a 4f optical setup

    by A Spaett, B G Zagar

    Fully developed laser speckle patterns are, due to their high contrast and statistical nature, well suited to measure strain and displacement via an appropriately designed measurement system. Laser speckle patterns are formed when a sufficiently coherent light source, such as a HeNe-laser, illuminates an optically rough surface. Therefore, methods based on laser speckle patterns can be applied to any surface scatterer with a minimum mean surface roughness of about a quarter of the laser’s wavelength. This includes also materials such as thin natural and technical fibres as well as foils, for which the presented measurement system, including the digital signal processing, was designed. In order to achieve the best possible resolution of a speckle-based measurement system, combined with a sufficiently small measurement uncertainty, all available design parameters must be optimised. One of these parameters is the speckle size, which is dependant on the properties of the imaging optics. In this paper a subjective laser speckle-based measurement system based on a so-called 4f-optical setup is presented. This setup allows the speckle size to be controlled in both axial and lateral dimensions separately, which is achieved with the help of an aperture in the Fourier plane of the optics. It is shown that the optimal speckle size for the presented measurement system, not only depends on the physical setup, but also on the signal processing applied. The signal processing routine estimates displacements of the speckle pattern, leading to an estimate for the strain. Additionally, it is demonstrated that the optimal speckle size can be lower than the commonly reported optimum between two and five pixel pitches, necessary to circumvent aliasing in the image data. While this is shown for a measurement setup using 4f-optics, the results are of general importance to speckle-based strain or displacement measurement systems and should thus be taken into account.


  • Messsystem zur Dehnungsmessung von Faserwerkstoffen basierend auf subjektiven Laser-Speckle-Mustern

    by Alexander Spaett, Bernhard G. Zagar

    Zusammenfassung: Fasern, sowohl Naturfasern als auch technische Fasern finden ihren Einsatz in vielen technischen Anwendungen. Es folgt daher die Notwendigkeit die Fasern zu charakterisieren. Die Charakterisierung umfasst in der Regel auch die Bestimmung des Spannungs-Dehnungs-Diagramms von einzelnen Fasern. Dieser Artikel beschäftigt sich mit einem Messsystem welches zur Messung des Spannungs-Dehnungs-Diagramms, auch unter erschwerten Testbedingungen, wie z. B. die Messung bei hohen und höchsten Temperaturen, geeignet ist. Es erfolgt neben der Präsentation des Messsystems ebenfalls eine Diskussion der optimierten Signalverarbeitung. Betrachtet werden anschließend Ergebnisse der Translation der Oberfläche eines menschlichen Haares, montiert auf einer Linearachse. Aus diesen Verschiebungen lässt sich dann, im Falle der Bestimmung des Spannungs-Dehnungs-Diagramms, die technische Dehnung ableiten. Es wird ein auf einer 4f− Optik basierender Aufbau verwendet. Für diesen erweist sich das Schätzen der Verschiebungen weit unter der Wellenlänge auf Basis des Kreuzleistungsdichtespektrum – unter den untersuchten Methoden – als am zuverlässigsten. Abschließend werden potentielle zukünftige Optimierungen des Gesamtsystems angerissen.