BZBernhard G. Zagar

Bernhard G. Zagar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bernhard G. Zagar has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Magnetic Railway Sleeper Detector

    by Lukas Heindler, Harald Hüttmayr, Thomas Thurner, Bernhard Zagar

    In an ever expanding railway network all around the world, the need for track maintenance grows steadily. Traditionally, one major part of track maintenance is ramming large vibrating steel picks into the gravel between and under railway sleepers to compress the gravel and generate a safe substructure. Even today, maintenance personnel still have to manually locate the sleepers if they cannot be detected by computer vision systems or visually by the operator. Here we developed a first of its kind magnetic sleeper detector, even able to find sleepers, buried in gravel, undetectable by vision based systems. Our approach of magnetic detection is based on a DC magnetic field excitation and a detector moving with respect to the rail system, including the sleepers and fasteners for mounting the rails. Due to railway application constraints a large air gap between the sensor and the sleeper structure is required, which significantly complicates the magnetic sensing task for robust sleeper detection. The design and optimization of the magnetic circuit was based on extensive 3D simulation studies to ensure highest possible variation in magnetic flux density at the sensor locations for absence and presence of a sleeper. Furthermore, a low noise and high sensitivity electronic circuit has been realized to cope with sensor signal offsets from unknown or changing sensor orientations with respect to the earth’s magnetic field, or magnetic interferences from other trains potentially passing by during active measurements. Since we only want to detect sleepers in close vicinity of the moving sensor system, digital signal processing of the acquired signals can easily compensate for disturbing slowly changing or static field components within real world application scenarios. We demonstrate that magnetic detection of even buried sleepers on railway tracks is possible for distances of up to 172 mm between the sensor and the sleeper. This enables an even higher level of railway maintenance automation previously impossible in certain scenarios.


  • A Magnetic Anomaly Detector

    by Lukas Heindler, Harald Hüttmayr, Bernhard G. Zagar

    Detecting only minute amounts of ferromagnetic materials introduced into a large air gap magnetic circuit can be quite challenging since the coupling is only rather loose and is aggravated by the fact that the ferromagnetic part of the circuit is a good electrical conductor, too. We report on the design of a sensor that allows the detection of railroad sleepers via their sleeper bolts, which in all cases are made of ferromagnetic material regardless of the wide range of sleeper materials. Since there is a strictly regulated railroad clearance profile, the air gap of the magnetic circuit is relatively large, which the sensor design must take into account. The sensor must also accommodate external interfering static and dynamic magnetic fields caused by strong DC and AC currents flowing nearby. Focus is put on standard bolts separated from the sensor by air gaps of up to 150 mm. The sensor system has to cope with and include in its design the ferromagnetic rail over which the sensor is guided with mostly undisclosed properties but still needs to guarantee a close to optimal detection probability of various ferromagnetic parts of also undisclosed properties, except them being ferromagnetic. We report on the design process that ultimately led to a high performance sensor system. In the design process we had to resort to series of 3D magnetic field simulations where we chose to vary in steps those geometric parameters that are left open to the designer and the type and size of a permanent magnet used to excite the magnetic circuit. It turned out that Hall-effect transducers are ideally suited to register field variations caused by the motion of the to be detected object. The interference suppression is done by processing, using among others a dynamic time warping scheme, the output signals of several Hall elements arranged in a line-scan camera like setup. First results are presented.

  • Open Access

    Analysis of electrical resistance tomography measurements for fast force localization

    by Sabrina Affortunati, Bernhard G. Zagar

    Safe human-robot collaboration requires the robot to monitor the location and intensity of a potential contact force. This is necessary to avoid a possible risk of injury to humans. The goal of this work is to develop a distributed sensor system that enables spatially resolved force measurement. By covering the entire robot’s surface with an elastic coating with a sufficiently pressure-dependent conductivity, electrical resistance tomography can be used for this purpose. The measurement of the transimpedance makes it possible to localize a force applied between the electrodes and thus increase the spatial resolution of the measuring system. By analyzing the obtained measurements, a fast method, compared to classical electrical resistance tomography, for force localization is proposed. This method is compared to the classical method of electrical resistance tomography. A reduction in the processing time to less than one tenth has been attained with the presented method for the case of force localization only.


  • Open Access

    Analysis of a capacitance tomography system for object detection and localization

    by Sabrina Affortunati, Bernhard G. Zagar

    To ensure safe human-robot cooperation, it is necessary not only to measure the force exerted during contact, but also to monitor an approaching action. This would allow avoiding any unintentional contact through evasive maneuvers and thus prevent possible injuries. In our contribution we analyze a localization system based on capacitance tomography where an approaching object constitutes an electrode of a multi-electrode capacitance. The system processes measured voltages made on the surface of a conductive layer. From this, the location of the capacitive coupling between the object and the layer can be reconstructed, and the position of the object can be estimated. The system’s performance is further analyzed using the Neyman–Pearson detector. To define the performance of the system, for object detection only, the influence of object distance, object area, and number of measurements used on the probability of detection is examined.

  • Messsystem zur Dehnungsmessung von Faserwerkstoffen basierend auf subjektiven Laser-Speckle-Mustern

    by Alexander Spaett, Bernhard G. Zagar

    Zusammenfassung: Fasern, sowohl Naturfasern als auch technische Fasern finden ihren Einsatz in vielen technischen Anwendungen. Es folgt daher die Notwendigkeit die Fasern zu charakterisieren. Die Charakterisierung umfasst in der Regel auch die Bestimmung des Spannungs-Dehnungs-Diagramms von einzelnen Fasern. Dieser Artikel beschäftigt sich mit einem Messsystem welches zur Messung des Spannungs-Dehnungs-Diagramms, auch unter erschwerten Testbedingungen, wie z. B. die Messung bei hohen und höchsten Temperaturen, geeignet ist. Es erfolgt neben der Präsentation des Messsystems ebenfalls eine Diskussion der optimierten Signalverarbeitung. Betrachtet werden anschließend Ergebnisse der Translation der Oberfläche eines menschlichen Haares, montiert auf einer Linearachse. Aus diesen Verschiebungen lässt sich dann, im Falle der Bestimmung des Spannungs-Dehnungs-Diagramms, die technische Dehnung ableiten. Es wird ein auf einer 4f− Optik basierender Aufbau verwendet. Für diesen erweist sich das Schätzen der Verschiebungen weit unter der Wellenlänge auf Basis des Kreuzleistungsdichtespektrum – unter den untersuchten Methoden – als am zuverlässigsten. Abschließend werden potentielle zukünftige Optimierungen des Gesamtsystems angerissen.


  • Estimators of tissue absorption parameters power-law prefactor and power-law exponent from medical ultrasonic images

    by Dinah Maria Brandner, Bernhard G. Zagar

    Ultrasound is a mechanical wave propagating in tissue which is influenced in its propagation behavior by the locally prevailing acousto-mechanical conditions. By suitable processing of the back-scattered signals received by the ultrasound transducer, tissue parameters such as local bulk modulus, mass density, speed of sound, isotropic scattering coefficient, and also the locally acting tissue absorption can be inferred. A discipline that has received increasing attention in the medical ultrasonic imaging discipline and its scientific publications in recent years is quantitative ultrasound (QUS) which tries to estimate with great accuracy these local acting tissue parameters. In this paper we analyze different algorithms for estimation of high spatial resolution tissue absorption parameters. On the one hand, there is a simple absorption estimator based on the evaluation of the quotient of the power density spectra calculated for different depth regions (spectral-log-difference estimator), which, however, assumes a linearly with frequency increasing absorption, this is contrasted with an estimator which also allows to estimate a polynomial increase of the absorption with frequency (method-of-moments estimator). Since a closed-form solution cannot be given for this, a maximum-likelihood estimator for which there is always an estimate that can be computed numerically efficiently is developed. The results, tissue attenuation, are presented as a color-coded overlay on conventional B-mode ultrasound images showing only morphology.


  • Localization of Electrodes based on Resistance Measurements

    by Sabrina Affortunati, Bernhard Zagar

    This paper considers the problem of the localization of electrodes in a distributed sensor system. Especially in impedance tomography the localization of the electrodes is of great importance, since deviations from nominal positions affect the result of the inverse problem. Conformal mapping allows to obtain analytical solutions of the resistances for complex geometries. By measuring the resistances between the electrodes, an estimation of the distance between each pair of electrodes is possible. In the case of non-adjacent electrodes this result is biased by the other electrodes. The mass-spring-relaxation algorithm offers a possibility of an error-tolerant localization by only using distances between neighboring electrodes. However, the robustness against attaining local minima depends on the initial guess of the arrangement. To overcome this, the classical multidimensional scaling algorithm was used to obtain an initial guess of the positions of all elements in the network. The combination of the two algorithms is analyzed. A verification on simulated results with cylindrical electrodes demonstrates the effectiveness of the approach.

  • Open Access

    Schätzung der Gewebeabsorption aus medizinischen Ultraschall-Bildern

    by Dinah Maria Brandner, Bernhard G. Zagar

    Zusammenfassung: Ultraschall ist eine sich im Gewebe ausbreitende mechanische Welle, die von den lokal vorherrschenden akusto-mechanischen Gegebenheiten in ihrem Ausbreitungsverhalten beeinflusst wird. Durch geeignete Verarbeitung der rückgestreuten und vom Ultraschallwandler empfangenen Signale kann daher auf Gewebeparameter, wie lokal wirkende Kompressionsmodule, Massendichte, Schallgeschwindigkeit, den isotropen Streukoeffizienten, aber auch auf die lokal wirkende Gewebeabsorption rückgeschlossen werden. Eine Disziplin, die in den letzten Jahren vermehrt Aufmerksamkeit in den wissenschaftlichen Publikationen zur medizinischen Ultraschallbildgebung gefunden hat, ist die Quantitative Ultraschall(QUS)-Analyse. In diesem Beitrag analysieren wir verschiedene Algorithmen zur Schätzung der örtlich hochaufgelösten Gewebeabsorption. Denn es wurde gezeigt, dass die Bereitstellung von farbcodierten Overlays von Absorptionsparametern über die herkömmlichen B‑mode-Ultraschall-Bilder, die ausschließlich die Morphologie darstellen, die diagnostische Qualität wesentlich verbessern kann.

  • Open Access

    Advanced laser speckle techniques characterize the complex thermomechanical properties of thin multilayered structures

    by Peter Zimprich, Bernhard G. Zagar

    Non-contacting methods for strain and displacement measurement are now well established, although not widely used in material science. Some applications like the determination of coefficients of thermal expansion, especially of thin multilayered structures, are particularly demanding and definitely require non-contacting methods. The paper shows that laser speckle pattern shift techniques can be successfully utilized for that kind of strain and displacement measurements. We elaborate a theory of laser speckle displacement estimation and show that these optical systems are sufficiently rigid and sensitive to determine the values of thermal expansion coefficients for small to medium-sized Si-based semiconductor devices like insulated gate bipolar power transistors.