YHYanlin He

Yanlin He

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yanlin He has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Inverse Kinematics Modeling of Soft Manipulator Based on Optimized Particle Swarm Optimization-Back Propagation Neural Network

    by Yi Yang, Peng Geng, Yanlin He, Hongji Zhou, Guangkai Sun, Weimin Bao, Lianqing Zhu

    In recent years,soft manipulators have attracted much attention in the field of robotics research due to their favorable flexibility,good environmental adaptability,and safety in human interaction.Despite this, the accurate and fast modeling of soft manipulators remains a difficult task subject to the uncertainties in their highly nonlinear. This article proposed an accurate, fast, and end-to-end modeling method based on data driven particle swarm optimization-back propagation neural network (PSO-BPNN). This network is targeted at the end-to-end tabular data and can easily realize accurate 3-D control of the soft manipulator. First, a simple, fast, and accurate inverse kinematic model of soft manipulator was generalized based on the BPNN, and then, a PSO algorithm was employed to optimize the BPNN, establishing an accurate and faster convergence inverse kinematic model mapping between 3-D end tip coordinates, and air pressures of three chambers applied in the soft manipulator. In addition, an external load was introduced to verify the data generalization of the model. Through trajectory tracking experiments, this method is proven to achieve good performance, which has the lowest average error of tip position (0.5590 and 1.2217 mm with load), best converge speed (converge at 221 epoch and converge at 256 with load), fastest training speed per epoch (0.0104 and 0.0242 s with load), the lowest standard deviation (0.1029) and the second lowest standard deviation (0.1199) with load, and the lowest average relative error (1.09% and 2.38% with load). Results demonstrated that the proposed model could effectively improve the training speed, end tip control accuracy, and data generalization of the soft manipulator.


  • MCFBGs-based shape reconstruction capable for decoupling strain and temperature under minor temperature variations

    by Kangpeng Zhou, Lianqing Zhu, Yanlin He, Guangkai Sun, Jingtao Xin, Yanming Song, Yumin Zhang


  • Open Access

    Design and simulated characterization of the dual-band polarizer based on metasurface structure

    by Hangwei Zhu, Yanlin He, Shuning Wang, Lidan Lu, Lianqing Zhu

    Dual-band polarizers must simultaneously exhibit high transmittance and bandwidth efficiency in fields such as polarization navigation and efficient detection. However, in most studies, the detection of dual bands is inefficient. To address this issue, we designed a dual-band polarizer similar in structure to the Roman numeral II, and it allows transmission of two different linear polarizations within different frequency bands. The interaction of the dual-band nano-polarizer with the polarization state of the incident light was analyzed through simulation experiments on the material, height, duty cycle, and other parameters of the periodic structure of the polarizer unit. The simulation results show that the proposed dual-band polarizer could achieve a polarization degree above 0.75 in the visible range and above 0.8 in the near-infrared (NIR) range. In addition, the transmittance was above 80% for x-polarization light in most of the visible wavelengths and reached 97.7% for y-polarization light in the NIR region, where NIR bandwidth accounted for 83.3% of the NIR wavelengths. The proposed design can achieve high transmittance and can be applied to ultrawide single-band polarization detection or dual-band vertical polarization detection.


  • SMOF-Based Torsion Compensated Bishop Algorithm for Medical Shape Measurement

    by Kangpeng Zhou, Lianqing Zhu, Guangkai Sun, Yanlin He

    This letter proposes a novel algorithm for three-dimensional shape reconstruction and torsion compensation using a spun multi-core optic fiber (SMOF). The torsion-compensation Bishop algorithm (TCBA) addresses torsion in SMOFs and enables accurate coordinate correction. Experimental validation is conducted by arranging the SMOF sensor in controlled helical shapes. The reconstruction accuracy is increased by 10.87%. Additionally, the mean error is reduced from 7.21 mm to 2.50 mm. The algorithm can be used for navigation in flexible robotics and minimally invasive surgery, where precise positioning and manipulation are crucial.


  • Open Access

    Research on Inverse Dynamics modeling of Soft Manipulator

    by Peng Geng, Yanlin He, Yi Yang, Fei Han

    In recent years, soft manipulators have attracted much attention in the field of robotics research due to their dexterity and good environmental adaptability. However, accurately modeling of soft manipulators remains a difficult task due to the uncertainties in their dynamics. Therefore, this paper proposed an method to accurately model the inverse dynamics of a soft manipulator. A BP neural network model was used to establish the inverse dynamics model of the soft manipulator, and then the particle swarm optimization (PSO) algorithm was employed to optimize the initial weights and biases of the BP neural network, and finally the correspondence between the end position of the soft manipulator and the input air pressure was established. In addition, load weights were introduced as one of the network inputs to enhance the control accuracy of the soft manipulator when it carries a load. By trajectory tracking experiments with and without load, the method was proved to achieve an average end position error of 0.839 mm with a relative error of 0.98%. When carrying loads its average end error is 1.800 mm with a relative error of 2.12%. The results demonstrated that the proposed optimized method can effectively improve the accuracy of the soft manipulator under both no-load and load conditions.

  • Open Access

    An Efficient Design Method for a Metasurface Polarizer with High Transmittance and Extinction Ratio

    by Shuning Wang, Yanlin He, Hangwei Zhu, Haoxuan Wang

    In fields such as polarization navigation and imaging, there is a demand for polarizers to simultaneously possess a high transmittance and extinction ratio. However, most studies focus solely on a single metric for polarizer design. To address this issue, this paper proposed a metasurface polarizer with a transition layer and its efficient design method, aiming to enhance the polarizers’ transmittance and extinction ratio performance simultaneously. An all-dielectric metasurface polarizer with a TiO2 transition layer was designed, and a tandem neural network was constructed by combining forward prediction and inverse design networks. The network is successfully trained by utilizing structural parameters and spectral response Tx and Ty datasets collected through simulation software. A high-performance metasurface polarizer was designed under the desired metrics with a transmittance of 90% and an extinction ratio of 40 dB. The proposed method in this paper made progress in the comprehensive optimization of polarizer performance. It is more accurate and efficient compared to other design methods and is better suited for practical applications.


  • Open Access

    A Novel Catheter Shape-Sensing Method Based on Deep Learning with a Multi-Core Optical Fiber

    by Fei Han, Yanlin He, Hangwei Zhu, Kangpeng Zhou

    In this paper, we propose a novel shape-sensing method based on deep learning with a multi-core optical fiber for the accurate shape-sensing of catheters and guidewires. Firstly, we designed a catheter with embedded multi-core fiber containing three sensing outer cores and one temperature compensation middle core. Then, we analyzed the relationship between the central wavelength shift, the curvature of the multi-core Fiber Bragg Grating (FBG), and temperature compensation methods to establish a Particle Swarm Optimization (PSO) BP neural network-based catheter shape sensing method. Finally, experiments were conducted in both constant and variable temperature environments to validate the method. The average and maximum distance errors of the PSO-BP neural network were 0.57 and 1.33 mm, respectively, under constant temperature conditions, and 0.36 and 0.96 mm, respectively, under variable temperature conditions. This well-sensed catheter shape demonstrates the effectiveness of the shape-sensing method proposed in this paper and its potential applications in real surgical catheters and guidewire.


  • Open Access

    Research on Posture Sensing and Error Elimination for Soft Manipulator Using FBG Sensors

    by Wenyu Li, Yanlin He, Peng Geng, Yi Yang

    Fiber-optic sensors are highly promising within soft robot sensing applications, but sensing methods based on geometry-based reconstruction limit the sensing capability and range. In this study, a fiber-optic sensor with a different deployment strategy for indirect sensing to monitor the outside posture of a soft manipulator is presented. The internal support structure’s curvature was measured using the FBG sensor, and its mapping to the external pose was then modelled using a modified LSTM network. The error was assumed to follow the Gaussian distribution in the LSTM neural network and was rectified by maximum likelihood estimation to address the issue of noise generated during the deformation transfer and curvature sensing of the soft structure. For the soft manipulator, the network model’s sensing performance was demonstrated. The proposed method’s average absolute error for posture sensing was 63.3% lower than the error before optimization, and the root mean square error was 56.9% lower than the error before optimization. The comparison results between the experiment and the simulation demonstrate the viability of the indirect measurement of the soft structure posture using FBG sensors based on the data-driven method, as well as the significant impact of the error optimization method based on the Gaussian distribution assumption.


  • Open Access

    Stiffness Modelling and Performance Evaluation of a Soft Cardiac Fixator Flexible Arm with Granular Jamming

    by Likun Gao, Yanlin He, Hangwei Zhu, Guangkai Sun, Lianqing Zhu

    To meet the practical application requirements of cardiac fixation during off-pump coronary artery bypass surgery, a soft cardiac fixator with a flexible arm was previously designed. To enable the soft cardiac fixator to adapt to uncertain external forces, this study evaluates the variable-stiffness performance of the flexible arm. First, the flexible arm was simplified as a soft silicone manipulator measuring 60 mm × 90 mm × 120 mm, which can actuate, soften, or stiffen independently along the length of the arm by combining granular jamming with input pressure. Then, the soft manipulator was modelled as a cantilever beam to analyse its variable-stiffness performance with granular jamming. Next, based on theoretical analysis and calculations, many experiments were conducted to evaluate the variable-stiffness performance of the soft manipulator. The experimental results demonstrated that the variable-stiffness performance is influenced by the flexible arm length, the size of the granules, and the input pressure.