OSOsama M. Selim

Osama M. Selim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Osama M. Selim has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synergy in Syngas Yield From Co-Pyrolysis of Cow and Chicken Manures

    by Kiran Raj Goud Burra, Osama M. Selim, Ryoichi S. Amano, Ashwani K. Gupta

    Manure waste from dairy, livestock, and poultry industries can pose significant challenges in their disposal due to their odor, nitrogen, phosphorous, and heavy metals contents, and pathogens. Existing disposal techniques like anaerobic digestion, although can provide biogas with energy output, is a slow process with significant carbon loss to CO2 and can also result in leaching. High-temperature pyrolysis can convert these wastes into syngas along with biochar which can be used for various applications. Thermochemical conversion needs to be feed-flexible, and operating it with manures from various animal sources such as poultry and dairy sectors can provide sustained operation, intensified process, and improved conversion throughput. So, we examined high-temperature co-pyrolysis of chicken and cow manures to understand the influence of their mixture fractions on the syngas components and char yield. Lab-scale semi-batch co-pyrolysis was carried out for cow and chicken manures at 900 °C with mixture fractions varying from 0 to 100%. Syngas analysis from these tests revealed the presence of synergistic enhancement of its components and in terms of syngas energy yield and carbon conversion, a 2:3 ratio of cow to chicken manure resulted in the most enhancement compared to the expected aggregate of pyrolyzing cow and chicken manures separately. This paper provides a detailed analysis of these syngas components from co-pyrolysis in comparison with separate pyrolysis to explore the advantages of blended feedstock toward an efficient, clean, and feed-flexible pathway for manure waste disposal and utilization.


  • Experimental and Numerical Study on the Effect of Annular Combustor Design on Thermal Uniformity Jet in Crossflow

    by Osama M. Selim, Saif Al Hamad, Ryoichi S. Amano

    Non-uniformity of the exit flow temperature represents one of the significant damages to gas-turbine components, particularly turbine blades. This may occur in the course of gas-turbine operation. This paper aims to provide passive techniques by modifying the combustor design rather than changing the flow parameters to improve the thermal uniformity and turbine blades to reduce thermal stresses and increase turbine blades’ life span. An acceptable agreement between the numerical and experimental results has been achieved, and the agreement includes the velocity and temperature profile. Four different angles have been tested numerically and experimentally with a maximum error of 5% at two different Reynolds numbers. Designing the outer combustor surface with a 45-deg angle bend can give a more uniform temperature distribution of 37% higher than the basic design with only a 0.5% higher pressure drop.

  • Open Access

    Energy, Exergy, and Emission Analysis on Industrial Air Compressors

    by Farah Nazifa Nourin, Juan Espindola, Osama M. Selim, Ryoichi S. Amano

    Air compressors, a key fluid power technology, play an essential role in industrial plants and office buildings, hospitals, and other types of facilities. The efficient use of the air compressor is crucial. By controlling unnecessary inefficiencies, high energy consumption can be reduced. This study aims to provide energy and exergy analysis on air compressors for different industries. Detailed case studies were also analyzed. The case study focuses on the energy and exergy analyses of the compressed air system of foundry industries. The results indicate that applying the six improvement recommendations yields significant amounts of energy and cost savings and significant improvements in the system's overall performance. The payback periods for different recommendations are economically feasible and worthwhile to use. The suggested improvement methods can provide cost savings with a low payback period.


  • Economic, Exergy, and Environmental Analyses of the Energy Assessments for U.S. Industries

    by Alaa Hasan, Osama M. Selim, Mohamed Abousabae, Ryoichi S. Amano, Wilkistar Otieno

    This paper highlights the expected versus actual outcomes of 152 energy assessments that were performed between 2011 and 2020. The 1317 energy-assessment recommendations (ARs) are grouped into eight categories. This study adopted four measures per each category of recommendations: annual electricity savings, annual gas savings, annual cost savings, and annual CO2 emission reduction. The first part of the analysis compares the expected to the actually implemented values of the measures applied to each recommendation’s category. It was found that the percentages of the actual to the expected electricity, gas, and cost savings are 26.6%, 11.4%, and 17.1%, respectively, while the percentage of the actual to the expected CO2 reduction is 22%. Moreover, the second part of the analysis presents each category's implementation rate and the reasons for rejecting the unimplemented ARs. Cash flow and expensive initial investment resulted in rejecting 25% of ARs. Furthermore, the study proposes techniques and strategies to increase ARs’ implementation rate and improve private energy services companies’ implementation rate. Finally, exergy analysis is added to show the improvement that energy assessment achieves regarding exergy and exergy efficiencies of different industrial applications.


  • Net Zero Energy Model for Wastewater Treatment Plants

    by Mohammad D. Qandil, Ahmad I. Abbas, Abdel Rahman Salem, Ahmad I. Abdelhadi, Alaa Hasan, Farah Nazifa Nourin, Mohamed Abousabae, Osama M. Selim, Juan Espindola, Ryoichi S. Amano

    The primary objective of this study is to achieve net-zero energy (NZE) wastewater treatment plants (WWTPs) by utilizing energy efficiency opportunities (EEO), combined heat and power (CHP) systems, and other renewable energy (RE) sources, e.g., solar, water, and wind powers. This study discusses an innovative energy solution for WWTPs in the United States, and one of the WWTPs with a flow capacity of 1.5 million gallons per day (MGD) was selected as a case study. An optimization tool, Hybrid Optimization of Multiple Energy Resources (HOMER) software, is used in this study to find the best energy system configuration to run the system. An energy audit for one WWTP was conducted in early 2020 and the report is used to do this study. The proposed EEOs were able to reduce WWTP energy consumption by about 11%. The excess anaerobic digester gas was utilized in a CHP system to cover about 42% of the facility’s consumption. Also, 3% of the utility energy consumption can be claimed by microturbines in the aeration tanks. Another two renewable energy systems, solar photovoltaic (PV) with 29% and water turbines with 15%, contribute to covering 100% of the WWTP energy consumption and achieving an NZE WWTP.


  • Mass Transfer Performance of a Marine Zooplankton Olfactometer

    by Ahmed A. Alkhafaji, Osama M. Selim, Ryoichi S. Amano, J. R. Strickler, P. Hinow, Houshuo Jiang, Paul C. Sikkel, N. Kohls

    By adopting different methods to the inlet of a zooplankton olfactometer, the current study investigates the effect of the energy of chemical flow on the Gnathiid isopod crustaceans predicted behavior. These are mobile external parasites of fishes that have a significant impact on the health of their hosts. They rely at least in part on olfactory cues to find the host fish. To better understand host-finding dynamics in these parasites, a study was conducted with the simulations as a blueprint for developing a 3-dimensional test apparatus similar to what has been used for studying olfactory orientation in insects. The simulated olfactometer has four legs, each leg forming an inlet where fluids are introduced into the flow domain. There is one outlet at the center of the device. A mixture of water and chemicals is presented by applying a multi-component system. The shear and chemical concentration distribution were conducted to see how fluid physics plays a role in creating a chemical landscape. Computational results show distinct regions separated by high chemical concentration gradients when introducing chemicals from one leg. Changing the fluid inflow from one common inlet to three inlets shows that the chemical distribution exhibits steeper gradients than the typical inlet case, depicting that the gradual chemical concentrations can drive the animal toward the target faster. The best behavior that gives higher chemical gradients is obtained through the study when using three sub-inlets and Schmidt number between 3 and 10.


  • Enhancements of the Thermal Uniformity Inside a Gas Turbine Dilution Section Using Dimensional Optmization

    by Tarek Elgammal, Osama M. Selim, Ryoichi S. Amano

    In the dilution section of the gas turbine, the flow and thermal mixing between the cold radial jets and hot mainstream is always a matter of interest to generate a consistent thermal profile, extending the longevity of the turbine blades. Multiple researches explored the topic experimentally and numerically, and new designs have been evaluated, including a central streamlined body with swirlers inside the dilution zone. Moreover, the dimensional aspects (diameter, length, and position) of the streamlined body can help in generating more uniform thermal profiles, but with the cost of increased pressure drop. Various design iterations are needed to be tested and assessed based on minimizing the contradicting uniformity number and pressure drop. Such a process is time and resources consuming if not wisely managed. The paper proposes a solution for the current problem by the integration of the “Design of Experiment/Optimization Algorithms” generator with the computational fluid dynamics solver. The outcomes from three different algorithms (ULH, MOGA-II, and HYBRID) are statistically analyzed to understand inputs-outputs correlations, develop response surface methodology, and help in finding the optimal designs. The suggested HYBRID optimization provided a better optimal curve with improvements of 69% and 15% in the thermal uniformity and pressure drop, respectively. The correlation coefficients stressed on the importance of the diameter as the highest influencer with inverse and direct correlations with uniformity and pressure drop, respectively. Finally, the Kriging response surface model enabled more optimal designs and a better understanding of the effective ranges of the three inputs.


  • Analysis of Energy Savings and CO2 Emission Reduction Contribution for Industrial Facilities in USA

    by Osama M. Selim, Mohamed Abousabae, Alaa Hasan, Ryoichi S. Amano

    Energy audits can identify energy consumptions, energy costs of the facility and evolve to develop measures to maximize efficiency, optimize supply energy, and eliminate waste. This paper investigates the potential energy savings at 20 different industrial sectors with 152 assessments for various facilities in Wisconsin, USA. On average, eight energy recommendations were suggested and applied in each facility. This paper provides a detailed guideline for each industry in terms of eight different energy categories: heating, ventilation, and air conditioning (HVAC) systems, heat recovery systems, electrical demand management, and utility bills, motors, compressors, waste management, and productivity enhancement, lighting, besides building envelope. In total, the energy savings were as follows: 98 million kWh in the shape of electricity, 561 billion British thermal units (BTUs) gas savings, 44 million gallons water savings, and 2-million-pound solid waste savings. Based on these savings, a 100-thousand-ton reduction in carbon dioxide emissions was obtained.


  • Co-Pyrolysis of Rice Husk and Chicken Manure

    by Juan Espindola, Osama M. Selim, Ryoichi S. Amano

    The increase in the production scale of chicken causes an increment in the produced manure. Chicken manure is considered an excellent soil amendment due to the high nitrogen and phosphorous content. However, the high production of manure exceeds the soil requirements. Rice husk is a by-product of rice production. Approximately one hundred forty million tons of rice husk is produced per year worldwide. There are several ways to manage rice husk such as animal bedding, direct combustion, or as a soil fertilizer. The husk's ashes are suitable for construction or as reinforcing material due to the high silica content. However, rice husk has a low volatile matter and high silica content, which makes processes like direct combustion inefficient. Thermochemical processes (such as pyrolysis and gasification) are effective ways to manage waste. The present study investigates the co-pyrolysis of chicken manure and rice husk. The experiments were conducted in a non-isothermal gravimetrical analyzer using nitrogen at a flowrate of 100 ml/min at three different heating rates (5, 10, and 15 °C/min). The degradation of individual biomass and biomass blends is investigated. The kinetic parameters are calculated using the Friedman method. Results show a positive synergetic effect for mixing ratios greater than 20% rice husk. The mixing ratio of 40% of rice husk manifested the best performance among all blends. This mixture showed the minimum energy of activation (90.2 kJ/mol). Also, the 40% rice husk mixing ratio showed maximum conversion when compared with chicken manure's conversion.


  • Effect of Heating Rate on Chemical Kinetics of Chicken Manure With Different Gas Agents

    by Osama M. Selim, Mohamed S. Hussein, Ryoichi S. Amano

    This paper presents the study on the effect of different heating rates on the pyrolysis and gasification process of the chicken manure. The obtained results are shown by the extent of reaction, the kinetics of the reaction, and differential thermal analysis. In total, 24 cases were carried out; eight heating rates with three different gas agents each. The results show that when using nitrogen or carbon dioxide as gas agents, the reactions were endothermic. Consequently, the energy must be supplied in terms of heating to sustain the reaction. Furthermore, the air gasification was exothermic, which means that the reaction can be sustained without external heating, where the self-ignition was observed between 450 °C–600 °C. The thermal degradation of the three main components of the chicken manure was obtained. The pyrolysis process was divided into two regions at 360 °C and the order of reaction of five for both regions. For the gasification process, it was observed that carbon dioxide had the most complicated mechanism with four stages. Finally, it is recommended to use the lowest heating rate to allow a quasi-equilibrium state through slow heating. Consequently, the delay in response or any transient error can be avoided as they are the main reason for measurement errors. These chemical kinetic parameters can be used in the future for the chicken manure simulation using the order of reaction mechanism for solid-state gasification.