AYAlina Yushchenko

Alina Yushchenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alina Yushchenko has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Prospects for improving the color fastness of thermally modified wood

    by Yuriy Tsapko, Alexey Tsapko, Olga Bondarenko, Natalya Lialina, Kostyantin Kaverin, Alina Yushchenko, Юрій Tsapko

    It is proved that the color of wood tends to darken due to changes in the chemical components of wood, such as the degradation of amorphous carbohydrates during heat treatment at high temperature. Exposure of wood to high temperatures for a certain period of time improves not only its dimensional stability and durability, but also gives it an attractive dark color. The use of heat treatment has significantly changed the values of the color parameters L*, a*, b* in the samples of thermally modified wood. The L* parameter on the end and stratum surfaces was significantly higher (72 for the end surface and 80 for the stratum) in the control samples. As a result of the heat treatment, the L* value decreased significantly at 160 °C, with a treatment duration of 10 hours, to 44 and 47, respectively. The duration of thermal modification has a significant impact on color darkening. We also investigated the effect of different types of paints and varnishes applied to the surfaces of the samples subjected to heat treatment at different temperatures on the color state. A significant darkening of the end surface of the samples thermally modified at 160 °C and at 190 °C for 1 hour during the oil-wax and azure finishes was observed. That is, the color of wood obtained at a low processing temperature can be increased by applying these protective substances and make the material more attractive. The following studies evaluated the color stability of thermally modified wood additionally treated with oil-wax and azure, as well as the adhesion of these protective substances to the surface under the influence of environmental factors. The influence of different types of protective substances on the color of the surface of heat-treated wood was determined. The application of oil-wax and azure to the surface of the samples also affected the darkening of their color. It can be said that heat-treated samples, whose structure has changed compared to conventional wood, show different interactions with the applied materials.

  • Open Access

    Veneration of thermomodified veneer for the protection of wood virobies type of curry

    by Yuriy Tsapko, Alexey Tsapko, Olga Bondarenko, Natalya Lialina, Kostyantin Kaverin, Alina Yushchenko

    The analysis of the process of thermal modification of wood was carried out and it was found that the treatment causes chemical changes in the structures of wood components (lignin, cellulose and hemicellulose). It has been proven that the thermal modification process causes the decomposition of hemicelluloses and the amorphous part of cellulose, reduces water absorption, and reduces the amount of substances that are a breeding ground for fungi, which leads to increased durability. In addition, lignin and the resulting pseudolignin undergo polymerization and redistribution throughout the cell volume, giving the cell walls greater density, hardness, and increased hydrophobicity (water repellency), thereby reducing their ability to absorb moisture and swell. It was determined that the oak veneer samples gained the most moisture from the environment in the first two days. The weight of unmodified veneer increased by 0.06 g, and similar results were shown by veneer modified at lower temperatures. The thermally modified veneer at 250 °C for 20, 30 minutes and at 280 °C gained 2 times less weight in the first two days - 0.03 g. Over the next 11 days, the control samples gained another 0.09 g, slightly less for samples modified at 160 °C, and modified at 220 °C and above ‒ no more than 0.03 g. Experimentally, it was found that compared to unmodified veneer, which gained 22.41 % moisture in two weeks, veneer modified at 250 and 280 °C gained 2.5 times less moisture – an average of 8.6 %. It was found that as the modification temperature increases to 280 °C, water absorption decreases more than twice. The results of the research will also allow us to target further tasks to create new methods of thermal modification of wood and its operating conditions at various facilities. The results of the research will also allow us to target further tasks to create new methods of thermal modification of wood and its operating conditions at various facilities.

  • Open Access

    Effectiveness of fire protection of wood with an organic-mineral coating with the addition of aluminum hydroxide

    by Yuriy Tsapko, Alexey Tsapko, Olga Bondarenko, Natalya Lialina, Dmitry Anopko, Alin Yushchenko

    Today, there are two methods of fire protection for wood. The first is impregnation with flame retardants, most often based on inorganic salts. When wood is moistened, fire retardants dissolve in a humid environment and gradually wash out to the surface, and then the fire retardant effect decreases over time. Acid-based products do not have a significant leaching problem due to changes in wood moisture, but penetrating deep into the wood structure and interacting with the cellulose, they reduce strength parameters. Therefore, it is not safe to use this product for critical load-bearing structures. The second method is to apply an organic or inorganic binder coating to the wood surface. Organic binder-based products have increased smoke generation and toxic substances, so their use is dangerous. Therefore, coatings capable of forming a heat-insulating layer on the surface of a building structure, which significantly reduces the processes of heat transfer to the material, have recently become widespread. As a result of the studies, it was found that the introduction of aluminium hydroxide into the composition of the organo-mineral coating in the amount of 2...8% reduces the swelling coefficient from 30 to 18 to a certain extent. However, for a coating containing 4%, an increase in the efficiency of fire protection of wood was found, namely a decrease in the loss of sample mass and flue gas temperature due to the formation of heat-resistant compounds on the surface of the fire protection layer when aluminium hydroxide interacts with ammonium polyphosphate. The use of aluminium hydroxide in the fireproofing composition provides the required level of protection of wood from thermal effects at the required amount of 4%, which leads to a reduction in cost and an increase in the efficiency of the coating. In further studies, it is planned to investigate other types of fillers, their properties and impact on the fire protection efficiency of wood in fireproof organic-mineral coatings.

  • Open Access

    Study of the effect of organic shell on the leaching of protective compositions from wood protected from fire

    by Yuriy Tsapko, Aleksii Tsapko, Olga Bondarenko, Natalia Lialina, Dmitriy Anopko, Alina Yushchenko

    Today, there are various ways to fireproof wood. When wood is moistened, flame-retardants dissolve in a humid environment and gradually wash out to the surface, after which the fire protection effect decreases over time. Acid-based products do not have a significant leaching problem due to changes in wood moisture, but by penetrating deep into the wood structure and interacting with cellulose, they reduce strength characteristics. Another method is to apply a coating based on organic or inorganic binders to the wood surface. Products based on organic binders have increased smoke generation and toxic substances, so their use is dangerous. Therefore, an analysis of protective materials for wooden building structures was carried out and the need to develop reliable methods for studying the leaching of flame-retardants necessary for the creation of new types of fire protection materials was established. There is a need to determine the conditions for the formation of a barrier to the leaching of flame-retardants and to establish a mechanism for inhibiting the transfer of moisture to the material. In this regard, a mathematical model of the process of leaching protective substances from wood after its impregnation with flame-retardants when using a polymeric shell made of organic material as a coating was developed, which allows us to evaluate the effectiveness of the polymeric shell by the amount of water absorbed. The results of calculating the weight gain of the sample during exposure to water indicate an ambiguous effect of the nature of the protection on water absorption. In particular, this implies the availability of data sufficient for the qualitative process of inhibiting moisture diffusion and identifying, on its basis, the time point from which the decrease in coating efficiency begins. Thus, there is reason to believe that it is possible to regulate the processes of wood protection in a targeted manner by using polymer coatings that can form a protective layer on the surface of the material that inhibits the rate of water absorption.