CWChengshuo Wu

Chengshuo Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chengshuo Wu has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design of Blade Thickness Distribution on Wake Suppression for Low Specific Centrifugal Pump

    by Chengshuo Wu, Dazhuan Wu

    Low specific speed centrifugal pump with the characteristics of small flow, high head, compact structure is often used in many areas such as chemical industry and aerospace which has the extremely high request to the efficient and vibration performance. Generally, the flow passages of the impellers are rather long and narrow. Under the combined influence of the deceleration and the

  • Effects of Blade Pressure Side Modification on Unsteady Pressure Pulsation and Flow Structures in a Centrifugal Pump

    by Chengshuo Wu, Wenqi Zhang, Peng Wu, Jiale Yi, Haojie Ye, Bin Huang, Dazhuan Wu

    In this paper, the effects of modifying the blade pressure side (PS) on unsteady pressure pulsation and flow structures in a low specific speed centrifugal pump are carried out by experimental and computational fluid dynamics (CFD). Seven monitor points are arranged in the circumferential direction of the impeller outlet to capture the pressure signals in the volute at flow rate of 0.2–1.6Qd. Results show that the blade PS modification introduced here can significantly alleviate the amplitude of pressure pulsation at blade passing frequency (fBPF) in all concerned operation conditions. To study the effects of blade modification on the internal flow field, the volute domain is replaced by an even outlet region for CFD analysis. The shear stress transfer (SST) turbulence model is adopted for steady-state numerical simulation while the delayed detached eddy simulation (DDES) based on the SST approach is adopted for transient simulation. Results show that local unsteady velocity fluctuation is the dominant reason for pressure pulsation in the volute. After blade PS modification, the relative velocity distribution at the impeller outlet is more uniform and the intensity of shedding vortex at the blade trailing edge (TE) decreases significantly. The change of internal flow structure improves the uniformity of circumferential velocity distribution the downstream of the impeller outlet, which leads to the decrease of pressure fluctuation amplitude in the volute. Meanwhile, the local Euler head (LEH) distribution at the impeller outlet and the blade loading of PS are presented and compared. It can be concluded that the reduction of pressure pulsation attributes to a more uniform energy distribution at the impeller outlet which is achieved by actively unloading the PS of the modified blades.


  • Improve of Unsteady Pressure Pulsation Based on Jet–Wake Suppression for a Low Specific Centrifugal Pump

    by Chengshuo Wu, Qianqian Li, Feng Zheng, Peng Wu, Shuai Yang, Haojie Ye, Bin Huang, Dazhuan Wu

    In this study, three impellers with different blade pressure side (PS) profiles are designed and the influence on the hydraulic and dynamic performance of a low specific speed centrifugal pump is investigated by numerical simulation and experimental research. The results show that blade PS modification introduced in this study can efficiently alleviate the unsteady pressure pulsation of model pump. In order to study the effects of blade modification on the internal flow filed, the volute domain is replaced by an even outlet region for computational fluid dynamic (CFD) analysis. Relative velocity distribution is extracted to visualize the three-dimensional (3D) flow characteristics at the impeller outlet. Results show that the flow at impeller outlet presents a typical jet–wake structure, which is significantly suppressed after the blade modification. The suppression of jet–wake structure, which is attributed to the redistribution of pressure and velocity in the impeller caused by the change of blade work capacity, can directly reduce the intensity of pressure pulsation in the volute by increasing the velocity uniformity at impeller outlet. Given that the existence of jet–wake flow results in large mixing loss and velocity deviation at the impeller outlet, entropy generation rate and slip velocity calculation are introduced here to measure the extent of jet–wake configuration. Results show that both indicators introduced here can be used to quantify the extent of the jet–wake structure at impeller outlet, and thus, indirectly predict the strength of unsteady pressure pulsation in pump volute.


  • Optimization of Nonlinear Pressure-Flow Characteristics of a Spring-Loaded Pressure Relief Valve Based on Computational Fluid Dynamics Simulation

    by Chengshuo Wu, Shiyang Li, Qianqian Li, Peng Wu, Bin Huang, Dazhuan Wu

    In this study, the nonlinear pressure-flow characteristics of a spring-loaded pressure relief valve (PRV), which is used in the automotive fuel supply system for pressure control is analyzed, and its characteristics are improved by means of geometrical modifications of the valve structure. Given the complexity of the coupling mechanism between the valve internal flow characteristics and spring system, a quasi-steady computational fluid dynamics (CFD) method is introduced to predict the nonlinear pressure-flow characteristic curve of the valve and the accuracy is validated by experimental data. The total hydraulic force on the valve spool and diaphragm are divided into three parts according to the loading position and the correlation between the internal flow characteristics, hydraulic force, and pressure-flow characteristics of the valve are explained by CFD analysis and visualization. The results show that the quasi-steady CFD method can accurately predict the trends of the valve nonlinear pressure-flow characteristic curve, which is mainly determined by the hydraulic force produced in the middle chamber of the valve. When the valve opening reaches a certain value, a main vortex would be formed in the middle chamber and lead to the sudden increase of hydraulic force which causes the fluctuation of the pressure-flow characteristic curve of the valve. It is also found that the toggle point for the flow regimes seen in the valve is affected by the geometric structure of the middle chamber and the pressure-flow characteristics can be improved by the round corner size modification.


  • Investigation of the Matching Relation Between Impeller and Flow Channel of Regenerative Flow Pumps

    by Qian-Qian Li, Cheng-Shuo Wu, Bo Qian, Peng Wu, Bin Huang, Da-Zhuan Wu

    As a specific radial flow pump, the regenerative flow pump (RFP) usually has a low efficiency. In this study, in order to explore the matching mechanism, three cases with various matching relations were investigated by the methods of theoretical calculation, computational fluids dynamics (CFD) simulation, and experiment test. The results illustrate that the theoretical prediction, numerical simulation, and experimental data are in good agreement. Furthermore, when the matching relation expressed by a ratio of the channel's and blade's radial length is equal to 1, the geometrical profiles of RFP can well guide the circulation flow into the channel at large radii and into the impeller at small radii, forming intense longitudinal vortex. The steady, strong exchange flow is characterized by the inflow and outflow regions approximately half of the isosurface. The axial vortex motion without apparent flow separation and irregular flow is observed in the impeller, a low velocity annulus exists in the medium radii of the impeller without other distinct velocity clouds, and a low velocity strip and a high velocity annulus in the channel are, respectively, performed along the blade's pressure surface and the channel's outer radii. All of this corresponds to the best pump's performance and the largest efficiency of the impeller and channel. This work promotes a systematical understanding of the matching mechanism between impeller and flow channel in the RFP and could provide some reference for the design and performance optimization for RFP.


  • Investigation on the Energy Exchange Characteristics of the Regenerative Flow Pump in an Automobile Fuel System

    by Qian-Qian Li, Guo-Shou Zhao, Cheng-Shuo Wu, Peng Wu, Da-Zhuan Wu, Chun-Lin Guo

    The flow inside the regenerative flow pump (RFP) is quite complex. This study investigated four pump models with various geometrical dimensions to explore the energy exchange characteristics. A computational fluids dynamics (CFD) simulation and the experiment were carried out. The results illustrate that the pressure growth mode in the impeller is consistent with the channels, which confirms the circulation flow existing in the pump. Furthermore, it is found that the circulation flow that features with longitudinal vortexes can be evaluated quantitatively by combining the analyses of the dimensionless axial distance, circulation number and entropy production. A smaller axial distance indicates that more flow is involved in the circulation and the intensity of the longitudinal vortex is enhanced; a large circulation number accompanied by a small dissipation loss could result in a satisfactory exchange flow. Therefore, the largest circulation number, least amount of dissipation, and shortest distance lead to the highest head and efficiency in the model with V-shaped blades and an increased impeller height. This work establishes a deeper understanding of the energy exchange mechanism and could serve as a reference for the geometrical design and performance reinforcement of RFP.