WXWendong Xin

Wendong Xin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wendong Xin has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a Fast Positioning Platform with a Large Stroke Based on a Piezoelectric Actuator for Precision Machining

    by Gaofeng Hu, Wendong Xin, Min Zhang, Guangjun Chen, Jia Man, Yanling Tian

    In this paper, a fast positioning platform (FPP) is proposed, able to meet simultaneously the requirements of large stroke and high frequency response, developed based on a PZT (piezoelectric actuator) and a quad-parallel flexible mechanism, for application in precision machining. The FPP is driven by a high-stiffness PZT and guided by a flexible hinge-based mechanism with a quad-parallel flexible hinge. The proposed quad-parallel flexible hinge mechanism can provide excellent planar motion capability with high stiffness and good guiding performance, thus guaranteeing outstanding dynamics characteristics. The mechanical model was established, the input and output characteristics of the FPP were analyzed, and the working range (output displacement and frequency) of the FPP was determined. Based on the mechanical model and the input and output characteristics of the FPP, the design method is described for of the proposed FPP, which is capable of achieving a large stroke while responding at a high frequency. The characteristics of the FPP were investigated using finite element analysis (FEA). Experiments were conducted to examine the performance of the FPP; the natural frequency of the FPP was 1315.6 Hz, while the maximum output displacement and the motion resolution of the FPP in a static state were 53.13 μm and 5 nm, respectively. Step response testing showed that under a step magnitude of 50 μm, the stabilization times for the falling and rising edges of the moving platform were 37 ms and 26 ms, respectively. The tracking errors were about ±1.96 μm and ±0.59 μm when the amplitude and frequency of the signal were 50 μm, 50 Hz and 10 μm, 200 Hz, respectively. The FPP showed excellent performance in terms of fast response and output displacement. The cutting test results indicated that compared with the uncontrolled condition, the values of surface roughness under controlled conditions decreased by 23.9% and 12.7% when the cutting depths were 5 μm and 10 μm, respectively. The developed FPP device has excellent precision machining performance.


  • Open Access

    An Experiment Study on Surface Topography of GH4169 Assisted by Ultrasonic Elliptical Vibration Ultra-Precision Turning

    by Gaofeng Hu, Min Zhang, Wendong Xin, Shengming Zhou, Yanjie Lu, Junti Lu

    Nickel-based superalloys (GH4169) are a typical difficult-to-machine material with poor thermal conductivity and severe work hardening. They are also prone to poor surface quality, severe tool wear, and poor machinability, which affect their performance. In this paper, an experimental study of GH4169 ultrasonic elliptical vibratory ultra-precision cutting was carried out. The experimental results show that ultrasonic elliptical vibratory cutting (UEVC) significantly reduces surface roughness and improves surface quality compared to conventional cutting (CC). The effects of cutting parameters such as cutting speed, feed rate, cutting depth, ultrasonic amplitude, and tool nose radius on the surface roughness of GH4169 workpieces were further investigated in UEVC. Based on the analysis of the experimental data, the optimal combination of parameters for GH4169 ultrasonic elliptical vibration ultra-precision cutting was determined: cutting speed of 3 m/min, feed rate of 16 μm/rev, cutting depth of 2 μm, ultrasonic amplitude of Ay = 3.0 μm, Az = 0.8 μm, and a tool nose radius of 0.8 mm. This parameter combination improves the machining quality of GH4169 and provides a valuable reference for the subsequent development of ultrasonic elliptical vibratory cutting for other difficult-to-machine materials.


  • Open Access

    Developmental and Experimental Study on a Double-Excitation Ultrasonic Elliptical Vibration-Assisted Cutting Device

    by Gaofeng Hu, Wendong Xin, Min Zhang, Junti Lu, Yanjie Lu, Shengming Zhou, Kai Zheng

    Ultrasonic elliptical vibration-assisted cutting (UEVC) has been successfully applied in the precision and ultra-precision machining of hard and brittle materials due to its advantages of a low cutting force and minimal tool wear. This study developed a novel double-excitation ultrasonic elliptic vibration-assisted cutting (D-UEVC) device by coupling ultrasonic vibrations in orthogonal dual paths. A two-degree-of-freedom vibration system of the D-UEVC was modeled, form which the elliptical trajectory of the end under different phase angle φ values was derived. The initial dimensions of the D-UEVC device were obtained through theoretical calculations. Subsequently, with the aid of finite element analysis methods, structural dynamic analysis of the device was conducted to obtain the elliptical vibration trajectory under different phase differences of the excitation source. In order to verify the cutting trajectory and cutting performance of the D-UEVC device, a prototype of the device was developed, and a series of vibration performance tests as well as the Inconel 718 cutting experiment were conducted. The experimental results illustrated that the D-UEVC device can achieve the elliptical vibration trajectory at the tool tip with a resonant frequency of 36.5 KHz. The adjustable elliptical vibration trajectories covered a range of ±4 μm in the axial and radial directions. Compared with the surface roughness Ra = 0.36 μm under the conventional cutting, the surface roughness of Inconel 718 under D-UEVC was Ra = 0.215 μm. Thus, the surface quality can be significant improved by utilizing the D-UEVC device.