Vibianti Dwi Pratiwi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Vibianti Dwi Pratiwi has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Rendra Panca Anugraha
Department of Chemical Engineering, Institut Teknologi Sepuluh Nopember, Kampus ITS Sukolilo, Surabaya, Indonesia 60111, Indonesia
3 shared publications Juwari Juwari
Department of Chemical Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
2 shared publications- Renanto Handogo
Department of Chemical Engineering, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia
2 shared publications Ahmad Nurfauzi
1 shared publicationAnnisa Nurul Islami
Department of Chemical Engineering, Faculty of Industrial Technology and Systems Engineering, Institut Teknologi Sepuluh Nopember, Sukolilo, Surabaya, East Java 60111, Indonesia
1 shared publicationChandra Ilham Prianto
Department of Chemical Engineering, Institut Teknologi Nasional, Jl. PH.H. Mustopa No. 23 Bandung, Indonesia
1 shared publication
Latest Publications
- 10 May 2026
- Published by Elsevier in Food and Bioproducts Processing
- Vol. 158, 231-238
Temperature optimization of crystallization with adiabatic vacuum cooling for sustainable palm sugar production from arenga sap
- 10 May 2026
- Published by Elsevier in Food and Bioproducts Processing
- Vol. 158, 231-238
Temperature optimization of crystallization with adiabatic vacuum cooling for sustainable palm sugar production from arenga sap
- Open Access
- 17 January 2026
- Published by Universitas Mercu Buana in SINERGI
- Vol. 30 (1) , 229-238
Towards low-carbon ammonia: simulation and economic evaluation of blue ammonia with carbon utilization
The proposed blue ammonia production considers technical, environmental, and economic aspects. The design of the blue ammonia using CCUS (Carbon Capture, Utilization, and Storage) technology in this study contributes to reducing carbon emissions and providing a more environmentally friendly ammonia supply in East Java, Indonesia, due to the availability of raw materials and geological storage locations for CO2 storage. Technically, the blue ammonia production was simulated with Aspen Hysys V.14.0. uses the Kellogg process, where the ammonia converter operates at a temperature of 437.60 °C and a pressure of 141.9 bar. From the environmental aspect, as much as 68.34 tons/h of ammonia produced produces CO2 71.36 tons/h, which is a total emission of 1.06 tons CO2/ tons NH3. In this study, CO2 delivery with a pipe length of 85 km (ID:539.8mm; OD: 558.7mm) was simulated using default parameters in Aspen Hysys V.14.0. In economic calculations from APEA (Aspen Process Economic Analyzer), the manufacture of blue ammonia designed in this study is very large, with a TAC (Total Annual Cost) of $82.25x106/year and an LCOA (Levelized Cost of Ammonia) of $93.28x108/ tons NH3. This study demonstrates the integration of CCUS technology into ammonia production, resulting in a reduction of CO₂ emissions by 1.06 tons CO₂ per ton of ammonia produced. The proposed system provides a practical approach for improving the environmental sustainability of industrial chemical processes.
- 17 January 2026
- Published by Universitas Mercu Buana in SINERGI
- Vol. 30 (1) , 229-238
Open AccessTowards low-carbon ammonia: simulation and economic evaluation of blue ammonia with carbon utilization
The proposed blue ammonia production considers technical, environmental, and economic aspects. The design of the blue ammonia using CCUS (Carbon Capture, Utilization, and Storage) technology in this study contributes to reducing carbon emissions and providing a more environmentally friendly ammonia supply in East Java, Indonesia, due to the availability of raw materials and geological storage locations for CO2 storage. Technically, the blue ammonia production was simulated with Aspen Hysys V.14.0. uses the Kellogg process, where the ammonia converter operates at a temperature of 437.60 °C and a pressure of 141.9 bar. From the environmental aspect, as much as 68.34 tons/h of ammonia produced produces CO2 71.36 tons/h, which is a total emission of 1.06 tons CO2/ tons NH3. In this study, CO2 delivery with a pipe length of 85 km (ID:539.8mm; OD: 558.7mm) was simulated using default parameters in Aspen Hysys V.14.0. In economic calculations from APEA (Aspen Process Economic Analyzer), the manufacture of blue ammonia designed in this study is very large, with a TAC (Total Annual Cost) of $82.25x106/year and an LCOA (Levelized Cost of Ammonia) of $93.28x108/ tons NH3. This study demonstrates the integration of CCUS technology into ammonia production, resulting in a reduction of CO₂ emissions by 1.06 tons CO₂ per ton of ammonia produced. The proposed system provides a practical approach for improving the environmental sustainability of industrial chemical processes.
- 30 July 2024
- Published by Wiley in Chemical Engineering & Technology
- Vol. 48 (2)
Analysis of Solar Thermal Energy Integration in the Industry in Indonesia
This study focuses on designing a solar thermal system utilizing parabolic trough collectors to replace conventional heat requirements in industrial processes. The research also assesses the impact of implementing this system on reducing CO2 emissions and provides economic analysis for industrial cities from two geographically different islands in Indonesia: Java and Sulawesi. This study uses a parabolic trough collector to absorb energy from sunlight. Based on the calculation of the energy balance of the solar collector, the average heat absorbed by the collector is 545.5 kJ m−2 h−1 in Java and 606.5 kJ m−2 h−1 in Sulawesi. As a result, approximately 67.55 tonnes of CO2 per day will be mitigated by transitioning from conventional processes. The economic analysis indicates a payback period of 3.54 years, a net present value of 1.4 million USD, and an internal rate of return of 12 % based on fuel savings.
- 30 July 2024
- Published by Wiley in Chemical Engineering & Technology
- Vol. 48 (2)
Analysis of Solar Thermal Energy Integration in the Industry in Indonesia
This study focuses on designing a solar thermal system utilizing parabolic trough collectors to replace conventional heat requirements in industrial processes. The research also assesses the impact of implementing this system on reducing CO2 emissions and provides economic analysis for industrial cities from two geographically different islands in Indonesia: Java and Sulawesi. This study uses a parabolic trough collector to absorb energy from sunlight. Based on the calculation of the energy balance of the solar collector, the average heat absorbed by the collector is 545.5 kJ m−2 h−1 in Java and 606.5 kJ m−2 h−1 in Sulawesi. As a result, approximately 67.55 tonnes of CO2 per day will be mitigated by transitioning from conventional processes. The economic analysis indicates a payback period of 3.54 years, a net present value of 1.4 million USD, and an internal rate of return of 12 % based on fuel savings.
- 29 May 2024
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 211 (9) , 1431-1444
Optimization of superstructure network in the CCS/CCSU system for CO 2 reduction from exhaust gas industry and gas field in Indonesia as archipelago state
- 29 May 2024
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 211 (9) , 1431-1444
Optimization of superstructure network in the CCS/CCSU system for CO 2 reduction from exhaust gas industry and gas field in Indonesia as archipelago state
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3009 (1) , 030006
Evaluation of variation of stirring speed, fluid flow rate and hot fluid temperature on heat transfer in stirred tanks
Heat transfer is one of the processes used in industry and one of the tools needed to carry out heat transfer is a stirred tank equipped with a coil and jacket. Heat transfer is one of the processes used in industry and one of the tools needed to carry out heat transfer is a stirred tank equipped with a coil and jacket.
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3009 (1) , 030006
Evaluation of variation of stirring speed, fluid flow rate and hot fluid temperature on heat transfer in stirred tanks
Heat transfer is one of the processes used in industry and one of the tools needed to carry out heat transfer is a stirred tank equipped with a coil and jacket. Heat transfer is one of the processes used in industry and one of the tools needed to carry out heat transfer is a stirred tank equipped with a coil and jacket.
- 28 December 2023
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 202, 226-234
Techno-economic analysis of CO2 cryogenic distillation from high CO2 content gas field: A case study in Indonesia
- 28 December 2023
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 202, 226-234
Techno-economic analysis of CO2 cryogenic distillation from high CO2 content gas field: A case study in Indonesia
- Open Access
- 6 June 2023
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Reaktor
- Vol. 1 (1) , 16-20
Redesign of Boiler Heat Recovery Steam Generator (HRSG) on The Utilization of Waste Gas in The Cement Industry
Approximately, 20%-50% of the total energy consumption during cement production is disposed of unintendedly as waste heat. This is very unfortunate considering that this waste heat still has the energy that can be further utilized. The heat recovery steam generator (HRSG) boiler system is one of widely used solutions in the chemical industry process to save operating costs in the chemical industry process. The purpose of this research is to determine the amount of energy that can be saved by implementing the HRSG system under ideal operating conditions. Based on the simulation results, the HRSG boiler design can produce steam with a temperature of 235°C and subsequently reduce the flue gas temperature from 244°C to 140.6°C. The HRSG system produces energy in the power turbine up to 1,756 kW with total energy exchanged in the system of 17,567.38 kW from the total energy in the flue gas of 20,693.96 kW and provides an overall efficiency of 84.61% at steady state conditions.Keywords: Aspen HYSYS, Waste Heat, Heat Recovery Steam Generator (HRSG)
- 6 June 2023
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Reaktor
- Vol. 1 (1) , 16-20
Open AccessRedesign of Boiler Heat Recovery Steam Generator (HRSG) on The Utilization of Waste Gas in The Cement Industry
Approximately, 20%-50% of the total energy consumption during cement production is disposed of unintendedly as waste heat. This is very unfortunate considering that this waste heat still has the energy that can be further utilized. The heat recovery steam generator (HRSG) boiler system is one of widely used solutions in the chemical industry process to save operating costs in the chemical industry process. The purpose of this research is to determine the amount of energy that can be saved by implementing the HRSG system under ideal operating conditions. Based on the simulation results, the HRSG boiler design can produce steam with a temperature of 235°C and subsequently reduce the flue gas temperature from 244°C to 140.6°C. The HRSG system produces energy in the power turbine up to 1,756 kW with total energy exchanged in the system of 17,567.38 kW from the total energy in the flue gas of 20,693.96 kW and provides an overall efficiency of 84.61% at steady state conditions.Keywords: Aspen HYSYS, Waste Heat, Heat Recovery Steam Generator (HRSG)
- Open Access
- 13 March 2023
- Published by Green Publisher in Journal of Comprehensive Science
- Vol. 2 (3) , 764-744
Analisis Ekonomi Pra-Rancangan Pabrik Bio-Oil Dari Tongkol Jagung Menggunakan Proses Pirolisis Cepat
Bio-oil diproduksi menggunakan proses pirolisis cepat pada temperatur 500 oC dengan perolehan (Yield) sebesar 75%. Bahan baku utama yang dipilih merupakan tongkol jagung karena kandungan selulosanya dapat dikonversikan melalui reaksi pirolisis katalitik menjadi bahan bakar, sekaligus memanfaatkan tongkol jagung yang pada umumnya tidak bernilai lebih. Bahan baku pendukung dalam pembuatan bio-oil ini meliputi katalis CoO, Nitrogen, dan K2CO3. Kapasitas produksi bio-oil pabrik ini sebesar 25.500 ton/tahun. Target pasar produk bio-oil yaitu industri minyak dan gas yang akan dipasarkan dengan harga USD 689,65/ton, sehingga nilai Gross Profit Margin (GPM) mencapai USD 31.437.807 USD/tahun. Dalam pra rancangan ini, pabrik akan didirikan pada tahun 2026.
- 13 March 2023
- Published by Green Publisher in Journal of Comprehensive Science
- Vol. 2 (3) , 764-744
Open AccessAnalisis Ekonomi Pra-Rancangan Pabrik Bio-Oil Dari Tongkol Jagung Menggunakan Proses Pirolisis Cepat
Bio-oil diproduksi menggunakan proses pirolisis cepat pada temperatur 500 oC dengan perolehan (Yield) sebesar 75%. Bahan baku utama yang dipilih merupakan tongkol jagung karena kandungan selulosanya dapat dikonversikan melalui reaksi pirolisis katalitik menjadi bahan bakar, sekaligus memanfaatkan tongkol jagung yang pada umumnya tidak bernilai lebih. Bahan baku pendukung dalam pembuatan bio-oil ini meliputi katalis CoO, Nitrogen, dan K2CO3. Kapasitas produksi bio-oil pabrik ini sebesar 25.500 ton/tahun. Target pasar produk bio-oil yaitu industri minyak dan gas yang akan dipasarkan dengan harga USD 689,65/ton, sehingga nilai Gross Profit Margin (GPM) mencapai USD 31.437.807 USD/tahun. Dalam pra rancangan ini, pabrik akan didirikan pada tahun 2026.
- Open Access
- 30 June 2022
- Published by Universitas Islam Negeri Ar-Raniry in Elkawnie
- Vol. 8 (1) , 68-77
The Extraction of Curcuminoids From Ethanol Extract of Yellow Turmeric (Curcuma longa L) and Activity Test on P-388 Murine Leukemia Cells
: Research on the Extraction of Curcuminoids from Ethanol Extract of Yellow Turmeric (Curcuma longa L) and its Activity Test on P-388 Murine Leukemia Cells has been carried out. This study aims to determine the per cent yield, solvent concentration, activity of P-388 murine leukemia cells and pH of the number of curcuminoids produced in ethanol extract. The curcuminoids were obtained by the extraction process through the soxhlet method using 70 and 96% ethanol solvent with a ratio of sample to solvent of 1:8 with variations in operating time for 3, 6, 9 and 12 hours. The absorbance of curcuminoid extract was measured to determine the concentration of curcumin. The cytotoxic test on murine leukemia P-388 cells used the Microculture Tetrazolium Technique (MTT) method. The results obtained were yellow turmeric curcuminoid compounds using 96% ethanol solvent at an extraction operating time of 9 hours. The largest extract yield was 21.15% with a concentration of 1121.10 ppm, which has activity against murine leukemia P-388 cells with an IC50 of 6.15 g/mL have the potential as anticancer leukemia, and dye analysis at acidic pH (2,4,6) is yellow, while alkaline pH (9,12) is brownish red as a natural food coloring. Abstrak: Penelitian ekstraksi kurkuminoid dari ekstrak etanol kunyit kuning (Curcuma longa L) dan uji aktivitasnya terhadap sel murine leukimia P-388 telah dilakukan. Penelitian ini bertujuan untuk mengetahui rendemen, konsentrasi pelarut, aktivitas sel murine leukemia P-388 dan pH terhadap jumlah kurkuminoid yang dihasilkan pada ekstrak etanol. Kurkuminoid diperoleh dengan proses ekstraksi dengan metode sokletasi menggunakan pelarut etanol 70 dan 96% dengan perbandingan sampel dan pelarut 1:8 variasi waktu operasi selama 3, 6, 9 dan 12 jam. Ekstrak kurkuminoid diukur absorbansi untuk mengetahui konsentrasi kurkumin. Pengujian sitotoksik terhadap sel murine leukimia P-388 dengan metode Microculture Tetrazolium Technique (MTT). Hasil yang diperoleh senyawa kurkuminoid kunyit kuning menggunakan pelarut etanol 96% pada waktu operasi ekstraksi 9 jam rendemen ekstrak terbesar 21,15% dengan konsentrasi 1121,10 ppm, memiliki aktivitas terhadap sel murine leukimia P-388 dengan IC50 sebesar 6,15 μg/mL berpotensi sebagai antikanker leukemia, dan analisis zat warna pada pH asam (2,4,6) berwarna kuning, pada pH basa (9,12 ) berwarna merah kecoklatan sebagai pewarna alami makananan.
- 30 June 2022
- Published by Universitas Islam Negeri Ar-Raniry in Elkawnie
- Vol. 8 (1) , 68-77
Open AccessThe Extraction of Curcuminoids From Ethanol Extract of Yellow Turmeric (Curcuma longa L) and Activity Test on P-388 Murine Leukemia Cells
: Research on the Extraction of Curcuminoids from Ethanol Extract of Yellow Turmeric (Curcuma longa L) and its Activity Test on P-388 Murine Leukemia Cells has been carried out. This study aims to determine the per cent yield, solvent concentration, activity of P-388 murine leukemia cells and pH of the number of curcuminoids produced in ethanol extract. The curcuminoids were obtained by the extraction process through the soxhlet method using 70 and 96% ethanol solvent with a ratio of sample to solvent of 1:8 with variations in operating time for 3, 6, 9 and 12 hours. The absorbance of curcuminoid extract was measured to determine the concentration of curcumin. The cytotoxic test on murine leukemia P-388 cells used the Microculture Tetrazolium Technique (MTT) method. The results obtained were yellow turmeric curcuminoid compounds using 96% ethanol solvent at an extraction operating time of 9 hours. The largest extract yield was 21.15% with a concentration of 1121.10 ppm, which has activity against murine leukemia P-388 cells with an IC50 of 6.15 g/mL have the potential as anticancer leukemia, and dye analysis at acidic pH (2,4,6) is yellow, while alkaline pH (9,12) is brownish red as a natural food coloring. Abstrak: Penelitian ekstraksi kurkuminoid dari ekstrak etanol kunyit kuning (Curcuma longa L) dan uji aktivitasnya terhadap sel murine leukimia P-388 telah dilakukan. Penelitian ini bertujuan untuk mengetahui rendemen, konsentrasi pelarut, aktivitas sel murine leukemia P-388 dan pH terhadap jumlah kurkuminoid yang dihasilkan pada ekstrak etanol. Kurkuminoid diperoleh dengan proses ekstraksi dengan metode sokletasi menggunakan pelarut etanol 70 dan 96% dengan perbandingan sampel dan pelarut 1:8 variasi waktu operasi selama 3, 6, 9 dan 12 jam. Ekstrak kurkuminoid diukur absorbansi untuk mengetahui konsentrasi kurkumin. Pengujian sitotoksik terhadap sel murine leukimia P-388 dengan metode Microculture Tetrazolium Technique (MTT). Hasil yang diperoleh senyawa kurkuminoid kunyit kuning menggunakan pelarut etanol 96% pada waktu operasi ekstraksi 9 jam rendemen ekstrak terbesar 21,15% dengan konsentrasi 1121,10 ppm, memiliki aktivitas terhadap sel murine leukimia P-388 dengan IC50 sebesar 6,15 μg/mL berpotensi sebagai antikanker leukemia, dan analisis zat warna pada pH asam (2,4,6) berwarna kuning, pada pH basa (9,12 ) berwarna merah kecoklatan sebagai pewarna alami makananan.
- Open Access
- 8 May 2019
- Published by Institut Teknologi Nasional, Bandung in Jurnal Rekayasa Hijau
- Vol. 3 (1)
Analisis Pengaruh Konsentrasi Asam dan Basa terhadap Recovery Tembaga (Cu) dari Limbah Elektronika
ABSTRAKPenangan limbah elektronika dengan cara recycle dapat menjadi sumber alternatif untuk mendapatkan material yang bernilai. Salah satu komponen utama dalam pembuatan peralatan elektronika adalah PCB. Printed Circuit Board (PCB) mengandung banyak material logam yang berharga seperti tembaga (Cu) sekitar 25% b/b. Dari segi ekonomi maupun kebutuhan pasar, material tembaga layak untuk di recovery. Salah satu cara recovery tembaga dari PCB limbah elektronika adalah dengan proses hidrometalurgi. Pada proses ini PCB direaksikan dengan larutan asam kuat seperti HNO3 sehingga membentuk Cu(NO3)2. Parameter yang digunakan adalah konsentrasi perolehan tembaga, sedangkan variabel yang berubah pada penelitian ini adalah konsentrasi HNO3, NaOH dan jenis PCB sebagai limbah elektronika. Konsentrasi tembaga yang dihasilkan dalam percobaan ini dicari menggunakan metode AAS (Atomic Absorption Spectroscopy). Hasil yang didapatkan dihitung menggunakan Anova dengan software Minitab 17 untuk melihat pengaruh konsentrasi asam dan basa terhadap jenis PCB limbah elektronika. Berdasarkan hasil perhitungan menggunakan anova dengan Minitab 17 didapatkan pengaruh HNO3 7N pada waktu percobaan 60 menit lebih signifikan dalam mendaur-ulang tembaga dari PCB televisi.Kata Kunci: Limbah Elektronik, PCB, Tembaga, MinitabABSTRACTHandling of electronic waste by recycle can be an alternative source for obtaining valuable material. One of the main components in making electronic equipment is PCB. Printed Circuit Board (PCB) contains many valuable metal materials such as copper (Cu) around 25% b / b. In terms of economy and market needs, copper material is suitable for recovery. One method of copper recovery from PCB electronic waste is the hydrometallurgical process. In this process the PCB is reacted with a strong acid solution such as HNO3 to form Cu(NO3)2. The parameters used were the concentration of copper recovery, while the variable that changed in this study was the concentration of HNO3, NaOH and PCB type as electronic waste. The concentration of copper produced in this experiment was sought using the AAS method (Atomic Absorption Spectroscopy). The results obtained were calculated using Anova with Minitab 17 software to see the effect of acid and base concentrations on the type of electronic waste PCB. Based on the calculation results using Anova by Minitab 17, the influence of the HNO3 7N on the 60 minute was found to be more significant in recycling copper from a television PCB.Keywords: Electronic Waste, PCB, Copper, Minitab
- 8 May 2019
- Published by Institut Teknologi Nasional, Bandung in Jurnal Rekayasa Hijau
- Vol. 3 (1)
Open AccessAnalisis Pengaruh Konsentrasi Asam dan Basa terhadap Recovery Tembaga (Cu) dari Limbah Elektronika
ABSTRAKPenangan limbah elektronika dengan cara recycle dapat menjadi sumber alternatif untuk mendapatkan material yang bernilai. Salah satu komponen utama dalam pembuatan peralatan elektronika adalah PCB. Printed Circuit Board (PCB) mengandung banyak material logam yang berharga seperti tembaga (Cu) sekitar 25% b/b. Dari segi ekonomi maupun kebutuhan pasar, material tembaga layak untuk di recovery. Salah satu cara recovery tembaga dari PCB limbah elektronika adalah dengan proses hidrometalurgi. Pada proses ini PCB direaksikan dengan larutan asam kuat seperti HNO3 sehingga membentuk Cu(NO3)2. Parameter yang digunakan adalah konsentrasi perolehan tembaga, sedangkan variabel yang berubah pada penelitian ini adalah konsentrasi HNO3, NaOH dan jenis PCB sebagai limbah elektronika. Konsentrasi tembaga yang dihasilkan dalam percobaan ini dicari menggunakan metode AAS (Atomic Absorption Spectroscopy). Hasil yang didapatkan dihitung menggunakan Anova dengan software Minitab 17 untuk melihat pengaruh konsentrasi asam dan basa terhadap jenis PCB limbah elektronika. Berdasarkan hasil perhitungan menggunakan anova dengan Minitab 17 didapatkan pengaruh HNO3 7N pada waktu percobaan 60 menit lebih signifikan dalam mendaur-ulang tembaga dari PCB televisi.Kata Kunci: Limbah Elektronik, PCB, Tembaga, MinitabABSTRACTHandling of electronic waste by recycle can be an alternative source for obtaining valuable material. One of the main components in making electronic equipment is PCB. Printed Circuit Board (PCB) contains many valuable metal materials such as copper (Cu) around 25% b / b. In terms of economy and market needs, copper material is suitable for recovery. One method of copper recovery from PCB electronic waste is the hydrometallurgical process. In this process the PCB is reacted with a strong acid solution such as HNO3 to form Cu(NO3)2. The parameters used were the concentration of copper recovery, while the variable that changed in this study was the concentration of HNO3, NaOH and PCB type as electronic waste. The concentration of copper produced in this experiment was sought using the AAS method (Atomic Absorption Spectroscopy). The results obtained were calculated using Anova with Minitab 17 software to see the effect of acid and base concentrations on the type of electronic waste PCB. Based on the calculation results using Anova by Minitab 17, the influence of the HNO3 7N on the 60 minute was found to be more significant in recycling copper from a television PCB.Keywords: Electronic Waste, PCB, Copper, Minitab