Baolin Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Baolin Huang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Hong Zhang
School of Architecture, Southeast University, Nanjing 210096, China
6 shared publications - Habib Ullah
School of Architecture, Southeast University, Nanjing 210096, China
3 shared publications - Boya Jiang
School of Architecture, Nanjing Tech University, Nanjing 211816, China
2 shared publications - Shanggang Hei
School of Architecture, Southeast University, Nanjing 210096, China
2 shared publications - Wenjia Pan
School of Architecture, Southeast University, Nanjing 210096, China
2 shared publications - Yinan Gong
School of Architecture, Southeast University, Nanjing 210096, China
2 shared publications
Latest Publications
- Open Access
- 21 March 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (6) , 3093
Research on Carbon Allowance Allocation Based on the Shapley Value: An In-Depth Study of Jiangsu Province
Given less than five years remaining until the target year for the first phase of China’s dual carbon goals, this paper studies carbon allowance allocation with an in-depth study of Jiangsu Province due to its significant role in driving the Yangtze River Delta’s pioneering achievement of the dual carbon goals. This study considered 2017 (the intermediate target year) as the base year and incorporated socio-economic data such as population, GDP, and the urbanization rate. Then, methods including the entropy weight method, gravity model and social network analysis were applied to classify Jiangsu’s 95 counties. From a regional coordination perspective, carbon governance clusters were constructed with the Shapley value, based on which spatial heterogeneity patterns were analyzed, and a carbon quota allocation was proposed. The findings reveal that: (1) The dominant factors influencing cross-scale carbon reduction capacity at the county level are natural carbon sink capacity (indicator weight: 0.180) and urbanization rate (indicator weight: 0.145). (2) The correlation between carbon reduction factors among different districts and counties exhibits an uneven spatial pattern. And the spatial configuration exhibits a multi-tiered, network-like distribution. (3) Through conducting spatial analysis and spatial grouping, Jiangsu could be divided into 14 county-level carbon governance alliances, with the number of member counties ranging from 4 to 10 within each alliance. (4) The allocation of carbon quotas in Jiangsu exhibits a distinct descending gradient from the southern to the northern regions, which is coupled with the regional economic geography. This is exemplified by the highest quota in Jiangyin (496.46 Mt) in the south and the lowest in Lianyun (34.90 Mt) in the north. It is concluded that two carbon emission reduction pathways should be established as a priority: (a) Tongshan-Gulou (Xuzhou)-Yunlong-Quanshan-Jiawang and (b) Tianning-Jiangyin-Zhangjiagang-Changshu-Taicang-Kunshan.
- 21 March 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (6) , 3093
Open AccessResearch on Carbon Allowance Allocation Based on the Shapley Value: An In-Depth Study of Jiangsu Province
Given less than five years remaining until the target year for the first phase of China’s dual carbon goals, this paper studies carbon allowance allocation with an in-depth study of Jiangsu Province due to its significant role in driving the Yangtze River Delta’s pioneering achievement of the dual carbon goals. This study considered 2017 (the intermediate target year) as the base year and incorporated socio-economic data such as population, GDP, and the urbanization rate. Then, methods including the entropy weight method, gravity model and social network analysis were applied to classify Jiangsu’s 95 counties. From a regional coordination perspective, carbon governance clusters were constructed with the Shapley value, based on which spatial heterogeneity patterns were analyzed, and a carbon quota allocation was proposed. The findings reveal that: (1) The dominant factors influencing cross-scale carbon reduction capacity at the county level are natural carbon sink capacity (indicator weight: 0.180) and urbanization rate (indicator weight: 0.145). (2) The correlation between carbon reduction factors among different districts and counties exhibits an uneven spatial pattern. And the spatial configuration exhibits a multi-tiered, network-like distribution. (3) Through conducting spatial analysis and spatial grouping, Jiangsu could be divided into 14 county-level carbon governance alliances, with the number of member counties ranging from 4 to 10 within each alliance. (4) The allocation of carbon quotas in Jiangsu exhibits a distinct descending gradient from the southern to the northern regions, which is coupled with the regional economic geography. This is exemplified by the highest quota in Jiangyin (496.46 Mt) in the south and the lowest in Lianyun (34.90 Mt) in the north. It is concluded that two carbon emission reduction pathways should be established as a priority: (a) Tongshan-Gulou (Xuzhou)-Yunlong-Quanshan-Jiawang and (b) Tianning-Jiangyin-Zhangjiagang-Changshu-Taicang-Kunshan.
- Open Access
Research on Carbon Reduction Path for Whole-Process Design of Prefabricated Envelope System Based on SEM
Prefabricated buildings, characterized by factory production, on-site assembly, and efficient and refined management, enhance construction efficiency, reduce building time, and promote material reuse and recycling. The energy consumption (and carbon emissions) during the building operational stage are significantly influenced by the performance of the building envelope component system. To minimize carbon emissions throughout the building’s lifecycle, it is essential to focus on a comprehensive optimization design for carbon reduction in prefabricated envelope systems. This paper draws on grounded theory to construct a system of factors influencing carbon emissions throughout the lifecycle of prefabricated building envelopes. Using a questionnaire survey and leveraging Structural Equation Modeling (SEM), this study identifies key pathways and factors, influencing carbon emissions throughout the lifecycle of building envelope components. It provides insights into carbon emission mechanisms in these components and establishes a comprehensive design pathway for carbon control throughout the lifecycle of building envelope systems. Subsequently, the survey results were analyzed using Structural Equation Modeling (SEM) to identify key factors influencing carbon emissions throughout the lifecycle and their interrelationships. These findings were integrated into the various stages of the whole-process design, yielding actionable recommendations for carbon control in the design process. Additionally, the case study method was employed to illustrate how carbon control design and optimization techniques can be applied at each stage of a specific project, providing a practical demonstration of the research outcomes. The study offers optimized methods for carbon control across the entire process, utilizing optimization strategies to reduce carbon emissions at each stage of the building’s lifecycle.
Open AccessResearch on Carbon Reduction Path for Whole-Process Design of Prefabricated Envelope System Based on SEM
Prefabricated buildings, characterized by factory production, on-site assembly, and efficient and refined management, enhance construction efficiency, reduce building time, and promote material reuse and recycling. The energy consumption (and carbon emissions) during the building operational stage are significantly influenced by the performance of the building envelope component system. To minimize carbon emissions throughout the building’s lifecycle, it is essential to focus on a comprehensive optimization design for carbon reduction in prefabricated envelope systems. This paper draws on grounded theory to construct a system of factors influencing carbon emissions throughout the lifecycle of prefabricated building envelopes. Using a questionnaire survey and leveraging Structural Equation Modeling (SEM), this study identifies key pathways and factors, influencing carbon emissions throughout the lifecycle of building envelope components. It provides insights into carbon emission mechanisms in these components and establishes a comprehensive design pathway for carbon control throughout the lifecycle of building envelope systems. Subsequently, the survey results were analyzed using Structural Equation Modeling (SEM) to identify key factors influencing carbon emissions throughout the lifecycle and their interrelationships. These findings were integrated into the various stages of the whole-process design, yielding actionable recommendations for carbon control in the design process. Additionally, the case study method was employed to illustrate how carbon control design and optimization techniques can be applied at each stage of a specific project, providing a practical demonstration of the research outcomes. The study offers optimized methods for carbon control across the entire process, utilizing optimization strategies to reduce carbon emissions at each stage of the building’s lifecycle.
- Open Access
Carbon Emission Assessment During the Recycling Phase of Building Meltable Materials from Construction and Demolition Waste: A Case Study in China
The improper disposal of construction and demolition waste (CDW) exacerbates the consumption of raw materials and emissions of greenhouse gasses. In this study, due to the high recycling rate, focusing on the meltable materials of CDW, the recycling phase of CDW is divided into four stages, namely the on-site disposal stage, the transportation stage, the reprocessing stage, and the reproduction stage. Second, based on these four stages, a carbon emission accounting model (CEAM) is established to evaluate the carbon emission benefits of meltable materials during these stages. Third, the CEAM is applied to a typical old residential area to evaluate the carbon emission reduction benefits of the CDW recycling. The results indicate that (1) the full-process carbon emissions of recycled steel, recycled flat glass, and recycled aluminum per unit mass are 677.77 kg/t, 1041.54 kg/t, and 845.39 kg/t, respectively, which are far lower than their corresponding ordinary meltable building materials (OMBMs); (2) the carbon emissions during the reproduction stage represent the primary component of carbon emissions in the MW recycling phase, accounting for 88.52% to 97.45% of the total carbon emissions; and (3) the carbon emissions generated by the recycling of cullet per unit mass are very high, reaching 1768 kg/t, which is 4.3 times that of scrap steel (409.05 kg/t) and 3.6 times that of scrap aluminum (483.76 kg/t). The research findings could provide theoretical methods and experimental data for decision-makers to formulate treatment plans for meltable materials in CDW, thereby empowering urban carbon emission reduction and promoting sustainable development. Construction parties engaged in demolition tasks should enhance on-site sorting and collaborate with recycling companies to ensure its efficient recycling. Recycling companies need to focus on high-carbon-emission stages, such as the reproduction stage, and strengthen technological research to improve carbon reduction benefits.
Open AccessCarbon Emission Assessment During the Recycling Phase of Building Meltable Materials from Construction and Demolition Waste: A Case Study in China
The improper disposal of construction and demolition waste (CDW) exacerbates the consumption of raw materials and emissions of greenhouse gasses. In this study, due to the high recycling rate, focusing on the meltable materials of CDW, the recycling phase of CDW is divided into four stages, namely the on-site disposal stage, the transportation stage, the reprocessing stage, and the reproduction stage. Second, based on these four stages, a carbon emission accounting model (CEAM) is established to evaluate the carbon emission benefits of meltable materials during these stages. Third, the CEAM is applied to a typical old residential area to evaluate the carbon emission reduction benefits of the CDW recycling. The results indicate that (1) the full-process carbon emissions of recycled steel, recycled flat glass, and recycled aluminum per unit mass are 677.77 kg/t, 1041.54 kg/t, and 845.39 kg/t, respectively, which are far lower than their corresponding ordinary meltable building materials (OMBMs); (2) the carbon emissions during the reproduction stage represent the primary component of carbon emissions in the MW recycling phase, accounting for 88.52% to 97.45% of the total carbon emissions; and (3) the carbon emissions generated by the recycling of cullet per unit mass are very high, reaching 1768 kg/t, which is 4.3 times that of scrap steel (409.05 kg/t) and 3.6 times that of scrap aluminum (483.76 kg/t). The research findings could provide theoretical methods and experimental data for decision-makers to formulate treatment plans for meltable materials in CDW, thereby empowering urban carbon emission reduction and promoting sustainable development. Construction parties engaged in demolition tasks should enhance on-site sorting and collaborate with recycling companies to ensure its efficient recycling. Recycling companies need to focus on high-carbon-emission stages, such as the reproduction stage, and strengthen technological research to improve carbon reduction benefits.
- Open Access
Recycling of Building Interior Decoration and Renovation Waste: A Case Study in China
Of all the construction waste, the building interior decoration and renovation waste (D&R waste) is difficult to dispose of and recycle due to its complex components and varied producers. The goal of this study is to reveal the current situation of D&R waste disposal through case studies and put forward the correlation proposal to improve standards of D&R waste recycling. This study investigated the various stages of the D&R waste management process, including generation, collection, transportation, sorting, recycling, and landfilling. Detailed studies were conducted for (i) the composition of D&R waste and (ii) the material flow analysis (MFA) of D&R waste recycling in different cases with different sorting technology. The results show that (i) concrete, stone, and other hard inorganic materials accounted for about 35–55% of the total. Soft inorganic materials such as aerated concrete and gypsum made up 5–25%, slag 15–20%, timber 5–10%, combustible matter such as plastic, rubber, and paper 9–12%, and glass and metal 1–5%, and (ii) artificial intelligence (AI) sorting offers better sorting performance and economic advantages over manual sorting, promoting the application of artificial AI sorting equipment as important solutions to face the key challenges of D&R waste recycling.
Open AccessRecycling of Building Interior Decoration and Renovation Waste: A Case Study in China
Of all the construction waste, the building interior decoration and renovation waste (D&R waste) is difficult to dispose of and recycle due to its complex components and varied producers. The goal of this study is to reveal the current situation of D&R waste disposal through case studies and put forward the correlation proposal to improve standards of D&R waste recycling. This study investigated the various stages of the D&R waste management process, including generation, collection, transportation, sorting, recycling, and landfilling. Detailed studies were conducted for (i) the composition of D&R waste and (ii) the material flow analysis (MFA) of D&R waste recycling in different cases with different sorting technology. The results show that (i) concrete, stone, and other hard inorganic materials accounted for about 35–55% of the total. Soft inorganic materials such as aerated concrete and gypsum made up 5–25%, slag 15–20%, timber 5–10%, combustible matter such as plastic, rubber, and paper 9–12%, and glass and metal 1–5%, and (ii) artificial intelligence (AI) sorting offers better sorting performance and economic advantages over manual sorting, promoting the application of artificial AI sorting equipment as important solutions to face the key challenges of D&R waste recycling.
- Open Access
A Component-Design-Based Carbon Emission Calculation Method in the Life Cycle of a Prefabricated Building Structural Member System
Carbon emissions from buildings account for a large proportion of total social carbon emissions. Prefabricated buildings can effectively reduce carbon emissions in the construction materialization phase. The existing building carbon emission calculation method for prefabricated buildings seems too complicated due to the large amounts of data that need to be consulted in the production, transportation, construction, and demolition phases of each building. Meanwhile, the traditional building carbon emission calculation method must be carried out after the completion of construction drawings, because the consumption of labor, materials, and machinery must be calculated according to these drawings. This paper proposes a building carbon emission calculation method for prefabricated buildings based on the component design method. A case study proved that our method can calculate carbon emissions in the materialization phase of construction more quickly than the traditional quota carbon emission calculation method, and the results of the two methods differ by less than 10%. This method significantly improves the prediction of carbon emissions in the building materialization phase.
Open AccessA Component-Design-Based Carbon Emission Calculation Method in the Life Cycle of a Prefabricated Building Structural Member System
Carbon emissions from buildings account for a large proportion of total social carbon emissions. Prefabricated buildings can effectively reduce carbon emissions in the construction materialization phase. The existing building carbon emission calculation method for prefabricated buildings seems too complicated due to the large amounts of data that need to be consulted in the production, transportation, construction, and demolition phases of each building. Meanwhile, the traditional building carbon emission calculation method must be carried out after the completion of construction drawings, because the consumption of labor, materials, and machinery must be calculated according to these drawings. This paper proposes a building carbon emission calculation method for prefabricated buildings based on the component design method. A case study proved that our method can calculate carbon emissions in the materialization phase of construction more quickly than the traditional quota carbon emission calculation method, and the results of the two methods differ by less than 10%. This method significantly improves the prediction of carbon emissions in the building materialization phase.
- Open Access
- 7 November 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-20
Mechanical carbon emission assessment during prefabricated building deconstruction based on BIM and multi-objective optimization
Machinery operation is a major source of carbon emissions in building deconstruction. Early intervention through Design for Deconstruction (DfD) is crucial for emission reduction, yet the factors influencing these emissions are underexplored. This study integrates parametric BIM with multi-objective optimization (MOO) to assess mechanical carbon emissions in deconstruction. Using the Octopus solver in Grasshopper for Rhino, the study analyzes independent variables—possible working hours (PWH), vertical speed (VS), and horizontal speed (HS)—and dependent variables—minimum mechanical carbon emissions (MCE (min)), minimum deconstruction period (DP (min)), and maximum working efficiency (WE (max)). A lightweight steel roof truss structure is analyzed, comparing real-world deconstruction with optimized DfD schemes. Sensitivity analysis for BIM-MOO optimized results reveal that: (1) Adjusting PWH, VS, and HS significantly affects WE and DP, though with limited impact on carbon emissions; (2) VS influences WE and DP more than HS; (3) Limiting DP is essential for balancing WE, DP, and MCE, with WE adjusted to 20–60% and modifications to PWH and VS achieving balanced management. This study underscores the importance of early design and real-time adjustments for efficient, low-emission deconstruction, supporting the advancement of green building practices.
- 7 November 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-20
Open AccessMechanical carbon emission assessment during prefabricated building deconstruction based on BIM and multi-objective optimization
Machinery operation is a major source of carbon emissions in building deconstruction. Early intervention through Design for Deconstruction (DfD) is crucial for emission reduction, yet the factors influencing these emissions are underexplored. This study integrates parametric BIM with multi-objective optimization (MOO) to assess mechanical carbon emissions in deconstruction. Using the Octopus solver in Grasshopper for Rhino, the study analyzes independent variables—possible working hours (PWH), vertical speed (VS), and horizontal speed (HS)—and dependent variables—minimum mechanical carbon emissions (MCE (min)), minimum deconstruction period (DP (min)), and maximum working efficiency (WE (max)). A lightweight steel roof truss structure is analyzed, comparing real-world deconstruction with optimized DfD schemes. Sensitivity analysis for BIM-MOO optimized results reveal that: (1) Adjusting PWH, VS, and HS significantly affects WE and DP, though with limited impact on carbon emissions; (2) VS influences WE and DP more than HS; (3) Limiting DP is essential for balancing WE, DP, and MCE, with WE adjusted to 20–60% and modifications to PWH and VS achieving balanced management. This study underscores the importance of early design and real-time adjustments for efficient, low-emission deconstruction, supporting the advancement of green building practices.
- Open Access
A WCA-Based Evaluation Approach for Matching Analysis of the Construction Process
Assessing construction process optimization and efficiency is crucial for the industry, yet quantitative methods for comparison are lacking. We propose the process matching degree (PMD) to quantitatively assess construction processes, enhancing efficiency and sustainability. Five primary indicators—regulations, environment, equipment, components, and organization—were identified, each of which were initially weighted equally using the weighted criteria approach (WCA). To refine the assessment, we conducted a questionnaire survey to adjust these weights based on expert feedback. Three sub-indicators were introduced for each primary indicator to increase granularity. The PMD’s operability was verified through two cases study involving BIM-simulated and real construction processes. The light-steel-structure building’s PMD values were 68 and 58 points, and the concrete structure’s PMD was 88.25, respectively, and the reasons for these differences were analyzed. This paper introduces PMD, its evaluation indicators, and calculation method, and verifies its feasibility through cases studies and expert questionnaire surveys, providing a comprehensive PMD research methodology.
Open AccessA WCA-Based Evaluation Approach for Matching Analysis of the Construction Process
Assessing construction process optimization and efficiency is crucial for the industry, yet quantitative methods for comparison are lacking. We propose the process matching degree (PMD) to quantitatively assess construction processes, enhancing efficiency and sustainability. Five primary indicators—regulations, environment, equipment, components, and organization—were identified, each of which were initially weighted equally using the weighted criteria approach (WCA). To refine the assessment, we conducted a questionnaire survey to adjust these weights based on expert feedback. Three sub-indicators were introduced for each primary indicator to increase granularity. The PMD’s operability was verified through two cases study involving BIM-simulated and real construction processes. The light-steel-structure building’s PMD values were 68 and 58 points, and the concrete structure’s PMD was 88.25, respectively, and the reasons for these differences were analyzed. This paper introduces PMD, its evaluation indicators, and calculation method, and verifies its feasibility through cases studies and expert questionnaire surveys, providing a comprehensive PMD research methodology.
- Open Access
BIM-Based Digital Construction Strategies to Evaluate Carbon Emissions in Green Prefabricated Buildings
In this paper, we explore the integration of building information modeling (BIM) technology to assess carbon emissions, emphasizing the unique contributions to smart and sustainable approaches in prefabricated buildings and focusing on the application of digital construction strategies facilitated by BIM to evaluate carbon emissions in green prefabricated buildings, with a detailed case study on C-House at Southeast University, Nanjing, China. The research methodology involved creating a BIM model of C-House in Rhino and collecting data from the operationalization phase. This research work delves into analyzing the structural components, on-site assembling process, and evaluation of carbon emissions by using a BIM-based assessment, as well as the energy load and consumption of prefabricated components, including sustainable PV panels, to enhance building efficiency and sustainability. The findings uncover the life cycle of C-House, which spans seven stages, compared with the five stages of conventional builds. Currently in its third cycle, C-House exhibits significant reductions of 70.57% in carbon emissions during the second cycle and 43.53% in the first one. This highlights the pattern showing that the prolonged reuse of prefabricated buildings leads to decreasing emissions over time. Such results underscore the potential carbon emission reductions and environmental advantages of reusing green prefabricated buildings. Furthermore, this study provides insights into the entire life cycle of the building, from inception to occupation and post-phase performance evaluation. By employing BIM for modeling, simulation, and analysis, we offer practical insights into the application of smart technologies for sustainable construction practices, significantly contributing to the advancement of green and digital construction technologies.
Open AccessBIM-Based Digital Construction Strategies to Evaluate Carbon Emissions in Green Prefabricated Buildings
In this paper, we explore the integration of building information modeling (BIM) technology to assess carbon emissions, emphasizing the unique contributions to smart and sustainable approaches in prefabricated buildings and focusing on the application of digital construction strategies facilitated by BIM to evaluate carbon emissions in green prefabricated buildings, with a detailed case study on C-House at Southeast University, Nanjing, China. The research methodology involved creating a BIM model of C-House in Rhino and collecting data from the operationalization phase. This research work delves into analyzing the structural components, on-site assembling process, and evaluation of carbon emissions by using a BIM-based assessment, as well as the energy load and consumption of prefabricated components, including sustainable PV panels, to enhance building efficiency and sustainability. The findings uncover the life cycle of C-House, which spans seven stages, compared with the five stages of conventional builds. Currently in its third cycle, C-House exhibits significant reductions of 70.57% in carbon emissions during the second cycle and 43.53% in the first one. This highlights the pattern showing that the prolonged reuse of prefabricated buildings leads to decreasing emissions over time. Such results underscore the potential carbon emission reductions and environmental advantages of reusing green prefabricated buildings. Furthermore, this study provides insights into the entire life cycle of the building, from inception to occupation and post-phase performance evaluation. By employing BIM for modeling, simulation, and analysis, we offer practical insights into the application of smart technologies for sustainable construction practices, significantly contributing to the advancement of green and digital construction technologies.