Hong Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hong Zhang has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Baolin Huang
School of Architecture, Southeast University, Nanjing 210096, China
6 shared publications - Chao Zhou
School of Architecture, Southeast University, Nanjing 210096, China
4 shared publications - Habib Ullah
School of Architecture, Southeast University, Nanjing 210096, China
4 shared publications - Bo Sun
School of Architecture, Southeast University, Nanjing 210096, China
3 shared publications - Meng Cong
Architects & Engineers Co., Ltd., Southeast University, Nanjing 210096, China
3 shared publications - Shanggang Hei
School of Architecture, Southeast University, Nanjing 210096, China
3 shared publications
Latest Publications
- Open Access
Composition Development and Mechanical Properties of Cement-Stabilized Interlocking Desert Sand Blocks
Interlocking masonry offers a potential route for using locally available desert sand in modular construction. However, the relationship between mixture properties and assembly performance remains insufficiently understood. This study investigated cement-stabilized interlocking desert sand blocks (IDSBs) through mixture characterization, scanning electron microscopy, and mechanical tests on units and prisms. Four cement contents (10–40 wt%) were evaluated, and the selected mixture was used to manufacture units and epoxy-bonded and dry-stacked prisms, with fired brick prisms as controls. Increasing cement content increased strength and density and reduced porosity and water absorption, while making efflorescence more apparent. At 40 wt% cement, the material specimens reached a 28-day compressive strength of 58.22 MPa, water absorption of 7.90%, and a wet-to-dry strength ratio of 0.81. The block-units reached 37.04 MPa. Mean compressive strengths of epoxy-bonded IDSB, dry-stacked IDSB, and fired brick prisms were 8.34, 7.06, and 6.09 MPa, respectively. IDSB prisms exhibited longitudinal splitting and inclined cracking near interlocking regions, suggesting sensitivity to nonuniform bearing and local stress concentrations. These results highlight the importance of joint conditions in translating unit strength into masonry capacity and support further development of desert sand masonry, subject to wall-scale, durability, and environmental assessments.
Open AccessComposition Development and Mechanical Properties of Cement-Stabilized Interlocking Desert Sand Blocks
Interlocking masonry offers a potential route for using locally available desert sand in modular construction. However, the relationship between mixture properties and assembly performance remains insufficiently understood. This study investigated cement-stabilized interlocking desert sand blocks (IDSBs) through mixture characterization, scanning electron microscopy, and mechanical tests on units and prisms. Four cement contents (10–40 wt%) were evaluated, and the selected mixture was used to manufacture units and epoxy-bonded and dry-stacked prisms, with fired brick prisms as controls. Increasing cement content increased strength and density and reduced porosity and water absorption, while making efflorescence more apparent. At 40 wt% cement, the material specimens reached a 28-day compressive strength of 58.22 MPa, water absorption of 7.90%, and a wet-to-dry strength ratio of 0.81. The block-units reached 37.04 MPa. Mean compressive strengths of epoxy-bonded IDSB, dry-stacked IDSB, and fired brick prisms were 8.34, 7.06, and 6.09 MPa, respectively. IDSB prisms exhibited longitudinal splitting and inclined cracking near interlocking regions, suggesting sensitivity to nonuniform bearing and local stress concentrations. These results highlight the importance of joint conditions in translating unit strength into masonry capacity and support further development of desert sand masonry, subject to wall-scale, durability, and environmental assessments.
- Open Access
Application of Multi-Ribbed Composite Wall Structure in Rural Housing: Seismic, Carbon Emissions, and Cost Analyses
Sustainable development is crucial worldwide. Under the Paris Agreement, countries commit to Nationally Determined Contributions (NDCs) assessed every five years. China, a major contributor to global warming, has made significant efforts to reduce carbon emissions and achieve carbon neutrality, a key strategy for sustainable development. However, there is a lack of adequate attention to embodied emission reduction in rural residential construction, despite a surge in building to improve living standards. This paper evaluated the feasibility of applying a multi-ribbed composite wall structure (MRCWS) in rural China through a village service project. A full-scale shaking table test was conducted to study its seismic performance. Carbon emissions were analyzed using process-based life cycle assessment (P-LCA) and the emission-factor approach (EFA), while costs were estimated using life cycle costing (LCC) and the direct cost method (DCM). These analyses focused on sub-projects and specific structural members to validate the superiority of this prefabricated structure over common brick masonry. MRCWS blocks were prefabricated by mixing wheat straw with aerocrete, utilizing agricultural by-products from local farmlands, thus reducing both construction-related carbon emissions and agricultural waste treatment costs. Results show that this novel precast masonry structure exhibits strong seismic resistance, complying with fortification limitations. Its application can reduce embodied carbon emissions and costs by approximately 6% and 10%, respectively, during materialization phases compared to common brick masonry. This new prefabricated building product has significant potential for reducing carbon emissions and costs in rural housing construction while meeting seismic requirements. The recycling of agricultural waste highlights its adaptability, especially in rural areas.
Open AccessApplication of Multi-Ribbed Composite Wall Structure in Rural Housing: Seismic, Carbon Emissions, and Cost Analyses
Sustainable development is crucial worldwide. Under the Paris Agreement, countries commit to Nationally Determined Contributions (NDCs) assessed every five years. China, a major contributor to global warming, has made significant efforts to reduce carbon emissions and achieve carbon neutrality, a key strategy for sustainable development. However, there is a lack of adequate attention to embodied emission reduction in rural residential construction, despite a surge in building to improve living standards. This paper evaluated the feasibility of applying a multi-ribbed composite wall structure (MRCWS) in rural China through a village service project. A full-scale shaking table test was conducted to study its seismic performance. Carbon emissions were analyzed using process-based life cycle assessment (P-LCA) and the emission-factor approach (EFA), while costs were estimated using life cycle costing (LCC) and the direct cost method (DCM). These analyses focused on sub-projects and specific structural members to validate the superiority of this prefabricated structure over common brick masonry. MRCWS blocks were prefabricated by mixing wheat straw with aerocrete, utilizing agricultural by-products from local farmlands, thus reducing both construction-related carbon emissions and agricultural waste treatment costs. Results show that this novel precast masonry structure exhibits strong seismic resistance, complying with fortification limitations. Its application can reduce embodied carbon emissions and costs by approximately 6% and 10%, respectively, during materialization phases compared to common brick masonry. This new prefabricated building product has significant potential for reducing carbon emissions and costs in rural housing construction while meeting seismic requirements. The recycling of agricultural waste highlights its adaptability, especially in rural areas.
- Open Access
- 1 January 2026
- Published by Wiley in Indoor Air
- Vol. 2026 (1)
Predictive Automation of Window Ventilation in Green Buildings: A Data‐Driven Framework for Integrating IoT Sensors, Machine Learning, and Occupant Behavior Modeling
This paper presents an Internet of Things (IoT)–enabled automated control framework for optimizing residential window ventilation systems. The system combines sensors, AI prediction, and automated motors to control ventilation based on environmental conditions and human behaviors. Unlike traditional fixed rule–based systems, our framework uses machine learning trained on 1.2 million data points to predict and automatically adjust ventilation beforehand. The modular automation system features message queuing telemetry transport (MQTT) and building automation and control network (BACnet) communication protocols for seamless integration with existing building management systems (BMSs), fail‐safe mechanisms for operational reliability, and mobile override capabilities preserving user autonomy. A 1‐month pilot study across 50 suburban Chinese households achieved an 18% reduction in heating, ventilation, and air‐conditioning (HVAC) energy use. The framework is modular and scalable, working with current building systems. It includes technical specs, integration methods, and security protections. While behavioral insights inform control logic, the core innovation lies in the automation architecture. This study advances intelligent building systems by fusing human‐centric design with robust automation engineering.
- 1 January 2026
- Published by Wiley in Indoor Air
- Vol. 2026 (1)
Open AccessPredictive Automation of Window Ventilation in Green Buildings: A Data‐Driven Framework for Integrating IoT Sensors, Machine Learning, and Occupant Behavior Modeling
This paper presents an Internet of Things (IoT)–enabled automated control framework for optimizing residential window ventilation systems. The system combines sensors, AI prediction, and automated motors to control ventilation based on environmental conditions and human behaviors. Unlike traditional fixed rule–based systems, our framework uses machine learning trained on 1.2 million data points to predict and automatically adjust ventilation beforehand. The modular automation system features message queuing telemetry transport (MQTT) and building automation and control network (BACnet) communication protocols for seamless integration with existing building management systems (BMSs), fail‐safe mechanisms for operational reliability, and mobile override capabilities preserving user autonomy. A 1‐month pilot study across 50 suburban Chinese households achieved an 18% reduction in heating, ventilation, and air‐conditioning (HVAC) energy use. The framework is modular and scalable, working with current building systems. It includes technical specs, integration methods, and security protections. While behavioral insights inform control logic, the core innovation lies in the automation architecture. This study advances intelligent building systems by fusing human‐centric design with robust automation engineering.
- Open Access
- 5 November 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (21) , 9886
Red Brick Powder-Based CoFe2O4 Nanocomposites as Heterogeneous Catalysts for Degrading Methylene Blue Through Activating Peroxymonosulfate
CoFe2O4 loaded onto red brick powder (CoFe2O4@RBP) was synthesized via coprecipitation followed by post-calcination and employed as a heterogeneous catalyst to activate peroxymonosulfate (PMS) for the degradation of methylene blue (MB), thereby valorizing red brick demolition waste within a circular economy pathway and aligning the study with sustainability-oriented resource recovery. The effects of pH, PMS concentration, catalyst dosage, and coexisting substances on MB removal were systematically investigated. Complete MB removal was achieved within 30 min, and the apparent rate constant for the CoFe2O4@RBP/PMS system was 0.22 min−1—slightly lower than that of CoFe2O4/PMS—while Co leaching was markedly reduced. The process performed well across a broad pH range (3.0–9.0). EPR and radical-quenching experiments indicate that SO4•− and HO• play a minor role, whereas the Co(II)–PMS complex is primarily responsible for MB degradation; accordingly, common coexisting species (SO42−, Cl−, NO3−, humic acid) exert negligible effects. The catalyst also maintained strong durability across numerous repetitions. These results highlight a cost-efficient route to PMS activation by coupling CoFe2O4 with construction waste-derived supports.
- 5 November 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (21) , 9886
Open AccessRed Brick Powder-Based CoFe2O4 Nanocomposites as Heterogeneous Catalysts for Degrading Methylene Blue Through Activating Peroxymonosulfate
CoFe2O4 loaded onto red brick powder (CoFe2O4@RBP) was synthesized via coprecipitation followed by post-calcination and employed as a heterogeneous catalyst to activate peroxymonosulfate (PMS) for the degradation of methylene blue (MB), thereby valorizing red brick demolition waste within a circular economy pathway and aligning the study with sustainability-oriented resource recovery. The effects of pH, PMS concentration, catalyst dosage, and coexisting substances on MB removal were systematically investigated. Complete MB removal was achieved within 30 min, and the apparent rate constant for the CoFe2O4@RBP/PMS system was 0.22 min−1—slightly lower than that of CoFe2O4/PMS—while Co leaching was markedly reduced. The process performed well across a broad pH range (3.0–9.0). EPR and radical-quenching experiments indicate that SO4•− and HO• play a minor role, whereas the Co(II)–PMS complex is primarily responsible for MB degradation; accordingly, common coexisting species (SO42−, Cl−, NO3−, humic acid) exert negligible effects. The catalyst also maintained strong durability across numerous repetitions. These results highlight a cost-efficient route to PMS activation by coupling CoFe2O4 with construction waste-derived supports.
- Open Access
- 25 October 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (21) , 9496
Unveiling and Evaluating Residential Satisfaction at Community and Housing Levels in China: Based on Large-Scale Surveys
In recent decades, China has witnessed remarkable growth in housing construction, yet housing-related complaints have not declined significantly, highlighting the gap between housing quality and public expectations. Against this background, this study analyzes 32,277 national surveys to unpack residential satisfaction with green-livable communities in China. Entropy and standard-deviation weighting identified 16 priority indicators; artificial neural networks revealed weak direct influence of basic demographics on satisfaction, highlighting non-linear demand patterns. While 65–75% of respondents are satisfied with most attributes, significant city-level gaps persist—Beijing peaks near 90%, Chongqing falls below 50%. Dissatisfaction converges on three domains: infrastructure (parking, barrier-free access), building performance (leakage, noise, thermal defects) and smart systems (security, energy, health monitoring). Residents’ improvement priorities have shifted from basic shelter to health safety, smart technology, humanistic care and ecological amenities. A “basic-security + quality-upgrade” strategy is proposed: short-term repairs of common defects, medium-term smart-sustainable upgrades and long-term participatory governance. The findings not only enrich the theoretical framework of community satisfaction research but also provide practical guidance for enhancing community quality and meeting residents’ expectations in the context of China’s rapid urbanization and housing development.
- 25 October 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (21) , 9496
Open AccessUnveiling and Evaluating Residential Satisfaction at Community and Housing Levels in China: Based on Large-Scale Surveys
In recent decades, China has witnessed remarkable growth in housing construction, yet housing-related complaints have not declined significantly, highlighting the gap between housing quality and public expectations. Against this background, this study analyzes 32,277 national surveys to unpack residential satisfaction with green-livable communities in China. Entropy and standard-deviation weighting identified 16 priority indicators; artificial neural networks revealed weak direct influence of basic demographics on satisfaction, highlighting non-linear demand patterns. While 65–75% of respondents are satisfied with most attributes, significant city-level gaps persist—Beijing peaks near 90%, Chongqing falls below 50%. Dissatisfaction converges on three domains: infrastructure (parking, barrier-free access), building performance (leakage, noise, thermal defects) and smart systems (security, energy, health monitoring). Residents’ improvement priorities have shifted from basic shelter to health safety, smart technology, humanistic care and ecological amenities. A “basic-security + quality-upgrade” strategy is proposed: short-term repairs of common defects, medium-term smart-sustainable upgrades and long-term participatory governance. The findings not only enrich the theoretical framework of community satisfaction research but also provide practical guidance for enhancing community quality and meeting residents’ expectations in the context of China’s rapid urbanization and housing development.
- Open Access
Study on the Influence and Optimization of Skylight Daylighting Spatial Form on Light and Thermal Performance in Shallow Buried Subway Stations: A Case Study of Shanghai
The rapid development of urban subway network is prompting higher requirements for daylighting in subway stations. The skylight daylighting space of shallow buried subway stations not only improves the quality of light environment but also brings challenges for the optimization of light and thermal performance, especially in areas with hot summers and cold winters. In this paper, key parameters such as illumination, air temperature, and the black sphere temperature of skylight and artificial lighting areas at stations A and B in Shanghai were tested with a field test system. The results show that the light environment in the skylight areas was significantly improved, but the need for regulation and control of the thermal environment increased. Combined with response surface analysis, 10 sample models for two types of daylighting space (partitioned and open atrium styles) were studied and constructed, including 254 simulated working conditions. The results reveal that design parameters such as the number, aspect ratio, depth of light openings, and skylight angle have significant effects on combined energy consumption. The decentralized double slope roof daylighting space has the best performance in partitioned and open atrium-style public areas, and combined energy consumption can be reduced to 385.14 kWh/m2. The optimization strategies proposed in this study can provide a quantitative basis for the skylight design of shallow buried subway stations and an important reference for the design of low-carbon and energy-saving underground spaces.
Open AccessStudy on the Influence and Optimization of Skylight Daylighting Spatial Form on Light and Thermal Performance in Shallow Buried Subway Stations: A Case Study of Shanghai
The rapid development of urban subway network is prompting higher requirements for daylighting in subway stations. The skylight daylighting space of shallow buried subway stations not only improves the quality of light environment but also brings challenges for the optimization of light and thermal performance, especially in areas with hot summers and cold winters. In this paper, key parameters such as illumination, air temperature, and the black sphere temperature of skylight and artificial lighting areas at stations A and B in Shanghai were tested with a field test system. The results show that the light environment in the skylight areas was significantly improved, but the need for regulation and control of the thermal environment increased. Combined with response surface analysis, 10 sample models for two types of daylighting space (partitioned and open atrium styles) were studied and constructed, including 254 simulated working conditions. The results reveal that design parameters such as the number, aspect ratio, depth of light openings, and skylight angle have significant effects on combined energy consumption. The decentralized double slope roof daylighting space has the best performance in partitioned and open atrium-style public areas, and combined energy consumption can be reduced to 385.14 kWh/m2. The optimization strategies proposed in this study can provide a quantitative basis for the skylight design of shallow buried subway stations and an important reference for the design of low-carbon and energy-saving underground spaces.
- 23 May 2025
- Published by Springer Nature in Building Simulation
- Vol. 18 (7) , 1697-1716
A model-based reinforcement learning framework for building heating management with branched rollout strategy and time-series prediction model
- 23 May 2025
- Published by Springer Nature in Building Simulation
- Vol. 18 (7) , 1697-1716
A model-based reinforcement learning framework for building heating management with branched rollout strategy and time-series prediction model
- Open Access
- 12 May 2025
- Published by MDPI AG in Preprints.org
Study on the Influence and Optimization of Skylight Daylighting Spatial Form on Light and Thermal Performance in Shallow Buried Subway Stations: A Case Study of Shanghai
The rapid development of urban subway network puts forward higher requirements for daylighting in subway stations. The skylight daylighting space of shallow buried subway stations not only improves the quality of light environment, but also brings challenges for the optimization of light and thermal performance especially in areas with hot summer and cold winter. In this paper, key parameters such as illumination, air temperature and black sphere temperature of skylight and artificial lighting areas at stations A and B in Shanghai were tested with a field test system. The results show that the light environment in the skylight areas was significantly improved, but the need for the regulation and control of thermal environment was increased. Combined with response surface analysis, 10 sample models for two types of daylighting space (partitioned and through-atrium types) were studied and constructed, including 254 simulated working conditions. The results reveal that design parameters such as the number, aspect ratio, and depth of light openings, and skylight angle have significant effects on combined energy consumption. The decentralized double slope roof daylighting space has the best performance in the partitioned and through-atrium public areas, and combined energy consumption can be reduced to 385.14 kWh/㎡. The optimization strategies proposed in this study can provide a quantitative basis for the skylight design of shallow buried subway stations and an important reference for the design of low-carbon and energy-saving underground space.
- 12 May 2025
- Published by MDPI AG in Preprints.org
Open AccessStudy on the Influence and Optimization of Skylight Daylighting Spatial Form on Light and Thermal Performance in Shallow Buried Subway Stations: A Case Study of Shanghai
The rapid development of urban subway network puts forward higher requirements for daylighting in subway stations. The skylight daylighting space of shallow buried subway stations not only improves the quality of light environment, but also brings challenges for the optimization of light and thermal performance especially in areas with hot summer and cold winter. In this paper, key parameters such as illumination, air temperature and black sphere temperature of skylight and artificial lighting areas at stations A and B in Shanghai were tested with a field test system. The results show that the light environment in the skylight areas was significantly improved, but the need for the regulation and control of thermal environment was increased. Combined with response surface analysis, 10 sample models for two types of daylighting space (partitioned and through-atrium types) were studied and constructed, including 254 simulated working conditions. The results reveal that design parameters such as the number, aspect ratio, and depth of light openings, and skylight angle have significant effects on combined energy consumption. The decentralized double slope roof daylighting space has the best performance in the partitioned and through-atrium public areas, and combined energy consumption can be reduced to 385.14 kWh/㎡. The optimization strategies proposed in this study can provide a quantitative basis for the skylight design of shallow buried subway stations and an important reference for the design of low-carbon and energy-saving underground space.
- Open Access
Research on Carbon Reduction Path for Whole-Process Design of Prefabricated Envelope System Based on SEM
Prefabricated buildings, characterized by factory production, on-site assembly, and efficient and refined management, enhance construction efficiency, reduce building time, and promote material reuse and recycling. The energy consumption (and carbon emissions) during the building operational stage are significantly influenced by the performance of the building envelope component system. To minimize carbon emissions throughout the building’s lifecycle, it is essential to focus on a comprehensive optimization design for carbon reduction in prefabricated envelope systems. This paper draws on grounded theory to construct a system of factors influencing carbon emissions throughout the lifecycle of prefabricated building envelopes. Using a questionnaire survey and leveraging Structural Equation Modeling (SEM), this study identifies key pathways and factors, influencing carbon emissions throughout the lifecycle of building envelope components. It provides insights into carbon emission mechanisms in these components and establishes a comprehensive design pathway for carbon control throughout the lifecycle of building envelope systems. Subsequently, the survey results were analyzed using Structural Equation Modeling (SEM) to identify key factors influencing carbon emissions throughout the lifecycle and their interrelationships. These findings were integrated into the various stages of the whole-process design, yielding actionable recommendations for carbon control in the design process. Additionally, the case study method was employed to illustrate how carbon control design and optimization techniques can be applied at each stage of a specific project, providing a practical demonstration of the research outcomes. The study offers optimized methods for carbon control across the entire process, utilizing optimization strategies to reduce carbon emissions at each stage of the building’s lifecycle.
Open AccessResearch on Carbon Reduction Path for Whole-Process Design of Prefabricated Envelope System Based on SEM
Prefabricated buildings, characterized by factory production, on-site assembly, and efficient and refined management, enhance construction efficiency, reduce building time, and promote material reuse and recycling. The energy consumption (and carbon emissions) during the building operational stage are significantly influenced by the performance of the building envelope component system. To minimize carbon emissions throughout the building’s lifecycle, it is essential to focus on a comprehensive optimization design for carbon reduction in prefabricated envelope systems. This paper draws on grounded theory to construct a system of factors influencing carbon emissions throughout the lifecycle of prefabricated building envelopes. Using a questionnaire survey and leveraging Structural Equation Modeling (SEM), this study identifies key pathways and factors, influencing carbon emissions throughout the lifecycle of building envelope components. It provides insights into carbon emission mechanisms in these components and establishes a comprehensive design pathway for carbon control throughout the lifecycle of building envelope systems. Subsequently, the survey results were analyzed using Structural Equation Modeling (SEM) to identify key factors influencing carbon emissions throughout the lifecycle and their interrelationships. These findings were integrated into the various stages of the whole-process design, yielding actionable recommendations for carbon control in the design process. Additionally, the case study method was employed to illustrate how carbon control design and optimization techniques can be applied at each stage of a specific project, providing a practical demonstration of the research outcomes. The study offers optimized methods for carbon control across the entire process, utilizing optimization strategies to reduce carbon emissions at each stage of the building’s lifecycle.
- Open Access
Recycling of Building Interior Decoration and Renovation Waste: A Case Study in China
Of all the construction waste, the building interior decoration and renovation waste (D&R waste) is difficult to dispose of and recycle due to its complex components and varied producers. The goal of this study is to reveal the current situation of D&R waste disposal through case studies and put forward the correlation proposal to improve standards of D&R waste recycling. This study investigated the various stages of the D&R waste management process, including generation, collection, transportation, sorting, recycling, and landfilling. Detailed studies were conducted for (i) the composition of D&R waste and (ii) the material flow analysis (MFA) of D&R waste recycling in different cases with different sorting technology. The results show that (i) concrete, stone, and other hard inorganic materials accounted for about 35–55% of the total. Soft inorganic materials such as aerated concrete and gypsum made up 5–25%, slag 15–20%, timber 5–10%, combustible matter such as plastic, rubber, and paper 9–12%, and glass and metal 1–5%, and (ii) artificial intelligence (AI) sorting offers better sorting performance and economic advantages over manual sorting, promoting the application of artificial AI sorting equipment as important solutions to face the key challenges of D&R waste recycling.
Open AccessRecycling of Building Interior Decoration and Renovation Waste: A Case Study in China
Of all the construction waste, the building interior decoration and renovation waste (D&R waste) is difficult to dispose of and recycle due to its complex components and varied producers. The goal of this study is to reveal the current situation of D&R waste disposal through case studies and put forward the correlation proposal to improve standards of D&R waste recycling. This study investigated the various stages of the D&R waste management process, including generation, collection, transportation, sorting, recycling, and landfilling. Detailed studies were conducted for (i) the composition of D&R waste and (ii) the material flow analysis (MFA) of D&R waste recycling in different cases with different sorting technology. The results show that (i) concrete, stone, and other hard inorganic materials accounted for about 35–55% of the total. Soft inorganic materials such as aerated concrete and gypsum made up 5–25%, slag 15–20%, timber 5–10%, combustible matter such as plastic, rubber, and paper 9–12%, and glass and metal 1–5%, and (ii) artificial intelligence (AI) sorting offers better sorting performance and economic advantages over manual sorting, promoting the application of artificial AI sorting equipment as important solutions to face the key challenges of D&R waste recycling.