Chinaza E. Nwanno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chinaza E. Nwanno has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Wenzhi Li
Department of Physics, Florida International University, Miami, FL, 33199, USA
4 shared publications - John Watt
Center for Integrated Nanotechnologies
3 shared publications Arun Thapa
Department of Physics, Florida International University, Miami, FL, 33199, USA
2 shared publicationsAmin Rabiei Baboukani
1 shared publication- Arun Thapa
Electrical & Computer Engineering Department, Montana State University, Bozeman, Montana 59717, United States of America
1 shared publication Chunlei Wang
1 shared publication
Latest Publications
- Open Access
- 15 January 2026
- Published by Royal Society of Chemistry (RSC) in RSC Applied Interfaces
- Vol. 3 (2) , 384-398
Pseudocapacitive enhancement of VACNTs with SnO 2 for next-generation supercapacitors
VACNTs decorated with SnO 2 nanoparticles exhibit enhanced charge storage through synergistic EDLC and pseudocapacitance, delivering high gravimetric specific capacitance, energy, and power densities for supercapacitor applications.
- 15 January 2026
- Published by Royal Society of Chemistry (RSC) in RSC Applied Interfaces
- Vol. 3 (2) , 384-398
Open AccessPseudocapacitive enhancement of VACNTs with SnO 2 for next-generation supercapacitors
VACNTs decorated with SnO 2 nanoparticles exhibit enhanced charge storage through synergistic EDLC and pseudocapacitance, delivering high gravimetric specific capacitance, energy, and power densities for supercapacitor applications.
- Open Access
- 1 October 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (19) , 1506
Vertically Aligned Carbon Nanotubes Grown on Copper Foil as Electrodes for Electrochemical Double Layer Capacitors
This study reports a binder-free, catalyst-free method for fabricating vertically aligned carbon nanotubes (VACNTs) directly on copper (Cu) foil using plasma-enhanced chemical vapor deposition (PECVD) for electrochemical double-layer capacitor (EDLC) applications. This approach eliminates the need for catalyst layers, polymeric binders, or substrate pre-treatments, simplifying electrode design and enhancing electrical integration. The resulting VACNTs form a dense, uniform, and porous array with strong adhesion to the Cu substrate, minimizing contact resistance and improving conductivity. Electrochemical analysis shows gravimetric specific capacitance (Cgrav) and areal specific capacitance (Careal) of 8 F g−1 and 3.5 mF cm−2 at a scan rate of 5 mV/s, with low equivalent series resistance (3.70 Ω) and charge transfer resistance (0.48 Ω), enabling efficient electron transport and rapid ion diffusion. The electrode demonstrates excellent rate capability and retains 92% of its initial specific capacitance after 3000 charge–discharge cycles, indicating strong cycling stability. These results demonstrate the potential of directly grown VACNT-based electrodes for high-performance EDLCs, particularly in applications requiring rapid charge–discharge cycles and sustained energy delivery.
- 1 October 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (19) , 1506
Open AccessVertically Aligned Carbon Nanotubes Grown on Copper Foil as Electrodes for Electrochemical Double Layer Capacitors
This study reports a binder-free, catalyst-free method for fabricating vertically aligned carbon nanotubes (VACNTs) directly on copper (Cu) foil using plasma-enhanced chemical vapor deposition (PECVD) for electrochemical double-layer capacitor (EDLC) applications. This approach eliminates the need for catalyst layers, polymeric binders, or substrate pre-treatments, simplifying electrode design and enhancing electrical integration. The resulting VACNTs form a dense, uniform, and porous array with strong adhesion to the Cu substrate, minimizing contact resistance and improving conductivity. Electrochemical analysis shows gravimetric specific capacitance (Cgrav) and areal specific capacitance (Careal) of 8 F g−1 and 3.5 mF cm−2 at a scan rate of 5 mV/s, with low equivalent series resistance (3.70 Ω) and charge transfer resistance (0.48 Ω), enabling efficient electron transport and rapid ion diffusion. The electrode demonstrates excellent rate capability and retains 92% of its initial specific capacitance after 3000 charge–discharge cycles, indicating strong cycling stability. These results demonstrate the potential of directly grown VACNT-based electrodes for high-performance EDLCs, particularly in applications requiring rapid charge–discharge cycles and sustained energy delivery.
- 31 October 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 625
Binder-free tin (IV) oxide coated vertically aligned carbon nanotubes as anode for lithium-ion batteries
- 31 October 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 625
Binder-free tin (IV) oxide coated vertically aligned carbon nanotubes as anode for lithium-ion batteries
- Open Access
- 6 June 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (11) , 988
Field Emission Properties of Cu-Filled Vertically Aligned Carbon Nanotubes Grown Directly on Thin Cu Foils
Copper-filled vertically aligned carbon nanotubes (Cu@VACNTs) were grown directly on Cu foil substrates of 0.1 mm thicknesses at different temperatures via plasma-enhanced chemical vapor deposition (PECVD). By circumventing the need for additional catalyst layers or intensive substrate treatments, our in-situ technique offers a simplified and potentially scalable route for fabricating Cu@VACNTs with enhanced electrical and thermal properties on thin Cu foils. Comprehensive analysis using field emission scanning microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) mappings, and X-ray diffraction (XRD) revealed uniform Cu filling within the VACNTs across a range of synthesis temperatures (650 °C, 700 °C, and 760 °C). Field emission (FE) measurements of the sample synthesized at 700 °C (S700) showed low turn-on and threshold fields of 2.33 V/m and 3.29 V/m, respectively. The findings demonstrate the viability of thin Cu substrates in creating dense and highly conductive Cu-filled VACNT arrays for advanced electronic and nanoelectronics applications.- 6 June 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (11) , 988
Open AccessField Emission Properties of Cu-Filled Vertically Aligned Carbon Nanotubes Grown Directly on Thin Cu Foils
Copper-filled vertically aligned carbon nanotubes (Cu@VACNTs) were grown directly on Cu foil substrates of 0.1 mm thicknesses at different temperatures via plasma-enhanced chemical vapor deposition (PECVD). By circumventing the need for additional catalyst layers or intensive substrate treatments, our in-situ technique offers a simplified and potentially scalable route for fabricating Cu@VACNTs with enhanced electrical and thermal properties on thin Cu foils. Comprehensive analysis using field emission scanning microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) mappings, and X-ray diffraction (XRD) revealed uniform Cu filling within the VACNTs across a range of synthesis temperatures (650 °C, 700 °C, and 760 °C). Field emission (FE) measurements of the sample synthesized at 700 °C (S700) showed low turn-on and threshold fields of 2.33 V/m and 3.29 V/m, respectively. The findings demonstrate the viability of thin Cu substrates in creating dense and highly conductive Cu-filled VACNT arrays for advanced electronic and nanoelectronics applications.