JCJeongmook Choi

Jeongmook Choi

*This is an algorithmically generated author record based on publicly available information.

Jeongmook Choi has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Lubrication Analysis of a Mechanical Seal Considering the Mixed Lubricant State of Gas and Liquid During External Power Shutdown of a Reactor Cooling Pump

    by Youngjun Park, Gwanghee Hong, Sanghyun Jun, Jeongmook Choi, Taegyu Kim, Minsoo Kang, Gunhee Jang

    We proposed a method to calculate the pressure, opening force, and leakage rate in a mechanical seal under the mixed lubricant state of a gas and liquid for the mechanical seal in a reactor cooling pump (RCP) during external power loss. We calculated the pressure by solving the nonlinear finite element equation composed of the linear Reynolds equation of an incompressible liquid lubricant and the nonlinear Reynolds equation of a compressible gas lubricant using the Newton–Raphson method. In addition, we calculated the temperature distribution by solving the two-dimensional energy equation utilizing the finite element method. Additionally, we included the turbulence effect in the incompressible liquid lubricant and the turbulence and slip effects in the compressible gas lubricant. The accuracy of the developed program was validated by comparing the simulated opening force and leakage rate of both the mechanical seal with the liquid lubricant and the mechanical seal with the gas lubricant with prior research. Our analysis shows that in high-temperature environments, the increase in the gas region at the lubrication surface leads to a decrease in pressure and opening force and an increase in the leakage rate. Conversely, as the outer pressure increases, the gas region decreases, resulting in an increase in pressure, opening force, and leakage rate.


  • Open Access

    Thermo-Fluid–Structural Coupled Analysis of a Mechanical Seal in Extended Loss of AC Power of a Reactor Coolant Pump

    by Youngjun Park, Gwanghee Hong, Sanghyun Jun, Jeongmook Choi, Taegyu Kim, Minsoo Kang, Gunhee Jang

    We proposed a numerical method to investigate the thermo-fluid–structural coupled characteristics of a mechanical seal of a reactor coolant pump (RCP), especially during extended loss of AC power (ELAP) operation. We developed a finite element program for the general Reynolds equation, including the turbulence effect to calculate the pressure, opening force, and leakage rate of fluid lubricant and the two-dimensional energy equation to calculate the temperature distribution of the fluid lubricant. We verified the accuracy of the developed program by comparing the simulated temperature distribution and leakage rate of this study with those of previous research. Heat conduction and elastic deformation due to pressure and temperature changes at the seal structure were analyzed using an ANSYS program. The results showed that temperature more significantly affected the elastic deformation of the seal structure near clearance than pressure both under normal and ELAP operating conditions. High temperature and pressure of the coolant under ELAP operating conditions deform the seal structure, resulting in a much smaller clearance of the fluid film than normal operating condition. However, even with a small clearance under ELAP operation, the leakage rate slightly increases due to the high internal pressure of the coolant. This research will contribute to the development of robust mechanical seals for RCPs by accurately predicting the characteristics of mechanical seals, especially when the RCP is operating under ELAP.