Pavel Yurov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pavel Yurov has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Galina S. Slavcheva
Voronezh State Technical University
3 shared publications - Artem Levchenko
Higher School of Building Materials Science, Voronezh State Technical University
1 shared publication D. S. Babenko
Voronezh Technical University
1 shared publication- Davud Karakchi-Ogli
Воронежский государственный технический университет (ВГТУ), Воронеж, РОССИЯ
1 shared publication Dmitriy Babenko
Воронежский государственный технический университет (ВГТУ), Воронеж, РОССИЯ
1 shared publication- I. I. Akulova
Voronezh State Technical University
1 shared publication
Latest Publications
- 8 August 2025
- Published by Stroymaterialy in Construction Materials
- No. 7,p. 12-20
Numerical simulation of construction 3D printing process. Problems and solution methods
The numerical modeling methods of the construction 3D-printing process with concrete are analyzed from the point of view of the variable geometry printed objects stability numerical simulation possibilities. The method of computational fluid dynamics (finite volume method) implemented in CFD-complexes (ANSYS Fluent, OpenFOAM, COMSOL) was found effective for modeling and process control. The method and CFD tools applicability to solve the printing process modeling and controlling problem is determined by the numerical simulation possibility of concrete mixture flow during extrusion and layers formation, geometric conformity and structures stability prediction, taking into account the mixture rheological properties (viscosity, yield strength and thixotropy) and their change in time. A distinctive feature of the developed generalized approach and the 3D printing process numerical model is the mixture rheological parameters usage. The requirements for the nomenclature and range of its values have been determined experimentally. As part of this approach implementation experimental studies of rheological behavior by shear rheometry were carried out for three types of mixtures. During the model elements 3D printing their quality and stability in dependence with the mixtures type and technological characteristics were assessed. As a result, the rheological behavior rational model of and the values range of visco-plastic mixture parameters ensuring its suitability for extrusion and layering is substantiated. These include effective viscosity and Bingham yield strength, which determine the mixture extrusion quality; static viscosity and plastic strength, static yield strength, on which the layer shape, preservation and the printed structure stability are depended.
- 8 August 2025
- Published by Stroymaterialy in Construction Materials
- No. 7,p. 12-20
Numerical simulation of construction 3D printing process. Problems and solution methods
The numerical modeling methods of the construction 3D-printing process with concrete are analyzed from the point of view of the variable geometry printed objects stability numerical simulation possibilities. The method of computational fluid dynamics (finite volume method) implemented in CFD-complexes (ANSYS Fluent, OpenFOAM, COMSOL) was found effective for modeling and process control. The method and CFD tools applicability to solve the printing process modeling and controlling problem is determined by the numerical simulation possibility of concrete mixture flow during extrusion and layers formation, geometric conformity and structures stability prediction, taking into account the mixture rheological properties (viscosity, yield strength and thixotropy) and their change in time. A distinctive feature of the developed generalized approach and the 3D printing process numerical model is the mixture rheological parameters usage. The requirements for the nomenclature and range of its values have been determined experimentally. As part of this approach implementation experimental studies of rheological behavior by shear rheometry were carried out for three types of mixtures. During the model elements 3D printing their quality and stability in dependence with the mixtures type and technological characteristics were assessed. As a result, the rheological behavior rational model of and the values range of visco-plastic mixture parameters ensuring its suitability for extrusion and layering is substantiated. These include effective viscosity and Bingham yield strength, which determine the mixture extrusion quality; static viscosity and plastic strength, static yield strength, on which the layer shape, preservation and the printed structure stability are depended.
- Open Access
- 27 June 2023
- Published by Publishing House ASV (Izdatelstvo ASV) in International Journal for Computational Civil and Structural Engineering
- Vol. 19 (2) , 31-41
THE EFFECT OF HOLLOW STRUCTURE PARAMETER ON THE 3D-PRINTED WALL BEARING CAPACITY. EXPERIMENTAL MODEL
We present the results of experimental studies and modelling of the evaluation of the bearing capacity of hollow 3D-printed walls with the printed shell performing bearing functions. The bearing capacity of hollow 3D-printed walls was experimentally assessed depending on the ratio of the void areas and casting layers in the wall structure. It was established that in case of central loading, a 3D-printed wall with bearing casting layers can serve as a bearing wall similar to traditional types of masonry construction without filling voids with structural concrete and reinforcement. We established the value of strength reduction of hollow 3D-printed walls, which amounted to ~0.1 – 0.25 MPa per 1 % of the increased area of voids. The limit value of the hollow structure parameter was determined, which must not exceed K = 0.75 in order to ensure the bearing capacity of self-bearing and non-bearing 3D-printed walls. We obtained an experimental model of the relationship between the hollow structure parameter and the bearing capacity, which allowed predicting the bearing capacity of a 3D-printed wall under central loading. It was suggested to take into account the hollow structure parameter K when calculating the elements of unreinforced 3D-printed walls under central compression according to the first group of limit states.
- 27 June 2023
- Published by Publishing House ASV (Izdatelstvo ASV) in International Journal for Computational Civil and Structural Engineering
- Vol. 19 (2) , 31-41
Open AccessTHE EFFECT OF HOLLOW STRUCTURE PARAMETER ON THE 3D-PRINTED WALL BEARING CAPACITY. EXPERIMENTAL MODEL
We present the results of experimental studies and modelling of the evaluation of the bearing capacity of hollow 3D-printed walls with the printed shell performing bearing functions. The bearing capacity of hollow 3D-printed walls was experimentally assessed depending on the ratio of the void areas and casting layers in the wall structure. It was established that in case of central loading, a 3D-printed wall with bearing casting layers can serve as a bearing wall similar to traditional types of masonry construction without filling voids with structural concrete and reinforcement. We established the value of strength reduction of hollow 3D-printed walls, which amounted to ~0.1 – 0.25 MPa per 1 % of the increased area of voids. The limit value of the hollow structure parameter was determined, which must not exceed K = 0.75 in order to ensure the bearing capacity of self-bearing and non-bearing 3D-printed walls. We obtained an experimental model of the relationship between the hollow structure parameter and the bearing capacity, which allowed predicting the bearing capacity of a 3D-printed wall under central loading. It was suggested to take into account the hollow structure parameter K when calculating the elements of unreinforced 3D-printed walls under central compression according to the first group of limit states.
- Open Access
- 16 January 2023
- Published by BSTU named after V.G. Shukhov in Bulletin of Belgorod State Technological University named after. V. G. Shukhov
- Vol. 8 (1) , 8-18
COMPREHENSIVE ASSESSMENT OF 3D-BUILD PRINTER COMPETITIVENESS
This article proposes a method for assessing the competitiveness of building 3D printers based on a comparison of their technical and technological characteristics and economic parameters. The methodology implements an integrated approach that takes into account a large number of comparison parameters of a different nature based on the use of relative indicators. The calculation takes into account the design characteristics of printers, the characteristics of the manufacturability of the printing process, the characteristics of printed building objects and the economic parameters of printers. So, for low-rise construction, the essential parameters are: printing speed, the ratio of the print area and the overall dimensions of the printer, the ability to work with low-flow mixtures and with various building mixtures without readjustment, reducing the defectiveness of the printed layer and energy consumption. The most competitive is the printer that provides more units of useful effect, determined by a set of technical and technological characteristics, per unit of costs associated with the purchase of a printer, its energy consumption, the laboriousness of maintenance and installation and dismantling at a construction site. As a result of assessing the competitiveness of various types of printers, it was revealed that the leader for low-rise construction is the portal printer BOD2 2-2-2 of the Danish company COBOD BOD2. For printing building products and structures in a production environment, the FIXED robotic arm from the Netherlands has a competitive advantage. CyBe Construction. The considered approach to assessing the competitiveness of building 3D printers is of practical interest to their manufacturers. The new knowledge about the significance of the design solutions of 3D printers, obtained as a result of the implementation of the proposed methodology, creates strategic guidelines for domestic manufacturers.
- 16 January 2023
- Published by BSTU named after V.G. Shukhov in Bulletin of Belgorod State Technological University named after. V. G. Shukhov
- Vol. 8 (1) , 8-18
Open AccessCOMPREHENSIVE ASSESSMENT OF 3D-BUILD PRINTER COMPETITIVENESS
This article proposes a method for assessing the competitiveness of building 3D printers based on a comparison of their technical and technological characteristics and economic parameters. The methodology implements an integrated approach that takes into account a large number of comparison parameters of a different nature based on the use of relative indicators. The calculation takes into account the design characteristics of printers, the characteristics of the manufacturability of the printing process, the characteristics of printed building objects and the economic parameters of printers. So, for low-rise construction, the essential parameters are: printing speed, the ratio of the print area and the overall dimensions of the printer, the ability to work with low-flow mixtures and with various building mixtures without readjustment, reducing the defectiveness of the printed layer and energy consumption. The most competitive is the printer that provides more units of useful effect, determined by a set of technical and technological characteristics, per unit of costs associated with the purchase of a printer, its energy consumption, the laboriousness of maintenance and installation and dismantling at a construction site. As a result of assessing the competitiveness of various types of printers, it was revealed that the leader for low-rise construction is the portal printer BOD2 2-2-2 of the Danish company COBOD BOD2. For printing building products and structures in a production environment, the FIXED robotic arm from the Netherlands has a competitive advantage. CyBe Construction. The considered approach to assessing the competitiveness of building 3D printers is of practical interest to their manufacturers. The new knowledge about the significance of the design solutions of 3D printers, obtained as a result of the implementation of the proposed methodology, creates strategic guidelines for domestic manufacturers.