YMYuliia Makarenko

Yuliia Makarenko

*This is an algorithmically generated author record based on publicly available information.

Yuliia Makarenko has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study of hydrogenation kinetics influence on sulfide stress corrosion cracking of shipbuilding-steels

    by V. D. Makarenko, O. E. Chyhyrynets, Yu. L. Vynnykov, V. I. Gots, S. Yu. Maksimov, V. V. Pipa, Yu. V. Makarenko


  • Open Access

    Experimental studies of the influence of hydrogen and sulfur on sulfide-corrosion destruction under tension of pipelines

    by Valerii Makarenko, Volodymyr Gots, Yuliia Makarenko, Olena Chygyrynets’, Volodymyr Savenko

    For the first time, comprehensive experimental studies of the influence of hydrogen and sulfur on sulphide stress corrosion cracking (SCR) of pipe steels in a corrosive-aggressive environment of NACE were carried out. In the research, experimental steels of the 06G2BA and 08KHMCHA brands, which are widely used in the construction of pipelines for various purposes, were used an analytical system (analyzer of non-stationary processes – ANP) was developed and tested in laboratory conditions, into which the installation for tests on corrosion-mechanical cracking under stress was integrated. For the first time, comprehensive experimental studies of pipe steel samples of grades 06G2BA and 08KHMCHA under the influence of sulfur and hydrogen were carried out, which made it possible to develop an understanding of the mechanisms of SCDS (sulphide-corrosion destruction under stress) and HID (hydrogen-initiated destruction). For the first time, experimental studies of the corrosion kinetics of 06G2BA and 08KHMCHA steels were carried out depending on the duration of the tests in the NACE model environment, while three periods of the formation of corrosion products were determined. It was found that sulfur and hydrogen, which are dissolved in test pipe steels, have a strong influence on the growth rate of corrosion cracks of SCDS, which made it possible to determine the optimal content of sulfur and hydrogen in steel 06G2BA. It is shown on the basis of the results of experimental studies that to ensure high crack resistance of pipe steels under conditions of static and cyclic loads both in air and in conditions of corrosive-aggressive environments, the sulfur content should not exceed 0.015-0.020%, and the dissolved hydrogen content should not exceed 2-3 ppm . The obtained results make it possible to improve pipe steels in the process of their smelting at metallurgical enterprises thanks to the use of economical modification with niobium, chromium, cerium and other impurities, which contribute to the fragmentation of the structure and reduce the content of non-metallic inclusions and harmful impurities. Уперше проведені комплексні експериментальні дослідження впливу водню і сірки на сульфідно-корозійне руйнування під напруженням (СКРН) трубних сталей в корозійно-агресивному середовищі NАСЕ В дослідженнях використовували дослідні сталі марок 06Г2БА і 08ХМЧА які широко використовують на будівництві трубопроводів різного призначення Для успішної реалізації поставлених задач спеціально була розроблена і апробована в лабораторних умовах аналітична система (аналізатор нестаціонарних процесів –АНП), в яку була інтегрована установка для випробувань на корозійно-механічне розтріскування під напруженням. Уперше проведені комплексні експериментальні дослідження зразків трубних сталей марок 06Г2БА і 08ХМЧА під впливом сірки і водню, що дозволило розвинути уявлення стосовно механізмів СКРН і воднем ініційоване руйнування (ВІР). Уперше проведені експериментальні дослідження кінетики корозії сталей 06Г2БА і 08ХМЧА в залежності від терміну випробувань в модельному середовищі NАСЕ, при цьому визначені три періоди формування продуктів корозії. Встановлено, що на швидкість росту корозійних тріщин СКРН сильний вплив здійснюють сірка і водень, які розчинені в трубних дослідних сталях, що дозволило визначити оптимальний вміст сірки і водню в сталі 06Г2БА. Показано на базі результатів експериментальних досліджень, що для забезпечення високої тріщиностійкості трубних сталей в умовах статичного і циклічного навантажень як на повітрі, так і в умовах корозійно-агресивних середовищ вміст сірки не повинен перевищувати 0.015-0.020%, а розчиненого водню – 2-3 ppm. Отримані результати дозволяють удосконалювати трубні сталі в процесі їх виплавки на металургійних підприємствах завдяки використання економного модифікування ніобієм, хромом, церієм та іншими домішками, які сприяють роздрібненню структури і зменшують вміст неметалевих включень та шкідливих домішок.

  • Open Access

    Complex hydraulic studies of welded pipes with different visco-plastic characteristics

    by Valerii Makarenko, Volodymyr Gots, Yuliia Makarenko, Olena Chygyrynets’, Volodymyr Savenko

    For the first time, complex hydraulic studies of pipes welded according to three different schemes were carried out, which made it possible to combine pipes of different viscosities, which affects the performance of welding joints. It was found that in the experimental temperature range, the zone of thermal influence of the second welding variant has the greatest resistance to the initiation of fractures under shock loading, and the lowest - the first variant. The static strength and ductility of the welded pipe joints of the second and third pipe welding options are approximately equivalent, and the resistance to the initiation of the thermally affected zone in all options is almost the same and not lower than that of the base metal. The results of the performed experimental studies indicate a weak correlation in the area of small values of impact viscosity with the characteristics of resistance to fracture propagation of welding joints in the conditions of full-scale pipe tests. The characteristics obtained from tests of full-thickness DWTT specimens are closer than the Charpy specimens to the actual performance characteristics of the weld joints in the pipe. In particular, it was established that the values of Az (-150C)=0.75 kJ and Ar (-150C)=0.45 kJ provide satisfactory resistance to the initiation and propagation of fractures in welding joints (at the base metal level). These characteristics correspond to KSU-60 = 0.5 MJ/m2, which is close to the impact toughness requirements for the base metal (0.55 MJ/m2). The use of optimal structural materials, that is, materials with high resistance to hydrogen destruction of both the base metal and zones of welding joints subjected to a thermo-deformation cycle of welding. A significant effect can be achieved by technological measures that will reduce residual welding stresses, as well as significantly reduce stress concentrators due to structural improvement of the shape of the welding unit. Application of such heat treatment regimes that restore the stability of metal with a coarse-grained and defective structure. Use improved pipe steels and welding materials, such as 06G2BAand 08 KhMCHA steels, which are characterized by increased resistance to hydrogen embrittlement and high crack resistance in aggressive environments, for the construction of pipelines of responsible purpose.


  • Open Access

    Experimental research of the influence of irrigation and duration of exploitation on crack resistance and corrosion destruction resistance of pipe steel

    by Валерій Макаренко, Volodymyr Gots, Yulia Makarenko, Volodymyr Pipa, Olga Voytovych, Volodymyr Azutov, Володимир Гоц, Володимир Піпа, Ольга Войтович

    For the first time in the work, systematic and comprehensive experimental studies of the influence of the service life of pipelines on the absorption of hydrogen by pipe steels, which is known to cause embrittlement of the metal, were carried out. In this regard, the microhardness of the structure increases sharply, and the crack resistance parameters of pipe steels also deteriorate. As an additional criterion for hydrogen exposure, the stress intensity factor K1C can be used, which characterizes the potential ability of a metal to resist brittle fracture. The curves of the temperature dependence of the K1C coefficient illustrate the change in the viscosity of steel caused by structural transformations during heat treatment and the subsequent effect of dissolved hydrogen on the metal structure during long-term operation of pipelines in corrosive and aggressive environments, in particular those used in water supply and drainage systems. It is known that the K1C coefficient is very sensitive to changes in the structure, that is, it is a local parameter of crack resistance that must be taken into account when designing and calculating pipeline structures. Additional studies established the dependence of the destruction of pipe steels of the 06G2BA brand, taking into account the preliminary stresses from 0.3σТ to 0.9σТ. Unstressed pipe steels are characterized by the highest resistance to destruction, that is, previous stresses of steel samples weaken the crack resistance of the metal. Additional studies of sulphide corrosion destruction according to the NACE methodology provided an opportunity to determine the susceptibility of pipe steels to corrosion destruction. Steels 06 G2BA and 08HMChА are characterized by the highest corrosion resistance. Уперше в роботі проведені системні та комплексні експериментальні дослідження впливу терміну експлуатації трубопроводів на поглинання трубними сталями водню, який, як відомо, спричиняє окрихчення металу. У зв’язку з цим різко підвищується мікротвердість структури, а також погіршуються параметри тріщиностійкості трубних сталей. Як додатковий критерій впливу водню можна використовувати коефіцієнт інтенсивності напружень К1С, який характеризує потенціальну здатність металу чинити спротив крихким руйнуванням. Криві температурної залежності коефіцієнта К1С ілюструють зміну в’язкості сталі, спричинену структурними перетвореннями при термообробці і подальшим впливом розчиненого водню на структуру металу в процесі тривалої експлуатації трубопроводів в корозійно-агресивних середовищах, зокрема тих, що використовуються в системах водопостачання та водовідведення. Відомо, що коефіцієнт К1С дуже чутливий до зміни структури, тобто являє собою локальний параметр тріщиностійкості, який потрібно враховувати при проєктуванні та розрахунку трубопровідних конструкцій. Додатковим дослідженням встановлена залежність руйнування трубних сталей марки 06Г2БА з урахуванням попередніх напружень від 0,3σТ до 0,9σТ. Найбільш високим спротивом руйнуванню характеризуються ненапружені трубні сталі, тобто попередні напруження сталевих зразків послаблюють тріщиностійкість металу. Додаткові дослідження сульфідного корозійного руйнування згідно з методикою NАСЕ надали можливість визначити схильність трубних сталей до корозійного руйнування. Найбільш високою корозійною стійкістю характеризуються сталі 06Г2БА і 08ХМЧА.

  • Open Access

    Comprehensive analysis of the performance of welding joints of gas pipelines with different viscosities

    by Valerii Makarenko, Olga Voitovych, Yuliia Makarenko, Volodymyr Savenko, Yurii Vynnykov

    Full-scale tests of gas pipelines with different viscosities were carried out in landfill conditions, which are as close as possible to the natural conditions of operation of gas pipelines. The kinetics of crack propagation along welded joints - their trajectory, the transition from the weld seam to the base metal of the pipe and vice versa, the speed of movement of cracks in viscous and brittle metal and defined zones of plastic deformation - were experimentally investigated. It is known that tests on Menaget, Charpy and other samples, which have thicknesses that do not correspond to the thickness of the pipe walls, do not reflect the real picture of visco-plastic and brittle fractures, which does not allow to develop a methodology or model for predicting the final resource (non-accident) of long-term gas pipelines period of operation. At the same time, theoretical and laboratory researches do not always adequately answer the questions directly related to ensuring the durability and trouble-free operation of pipelines. It is likely that in the laboratory conditions of enterprises or scientific institutions it is difficult to reproduce and take into account all the factors that characterize the growth and spread of destruction in a real operating gas pipeline. Therefore, the data of laboratory studies must be checked and necessarily clarified according to the results of pneumatic tests of long pipe sections, i.e., at present, the need to combine laboratory and field tests of pipes of the gas pipeline network is urgently needed. Such tests are not massive, but as a result of their performance, important information is obtained regarding the behavior and properties of the metal in the conditions of loading and operation, which are closest to operational conditions. In field tests, pipes with a diameter of 1000x18 mm were used, which underwent controlled rolling (steel class X70 - grade 06G2BA) at a working pressure of RR = 9.7 MPa (in the northern - low-temperature version). Tensile tests, studies of impact toughness, strength and plasticity of the weld metal were carried out according to standard methods described in works [2-5]. During the experiments, a large number of sensors of temperature, pressure, strain, stress, crack propagation speed, etc. were used. The obtained results regarding the kinetics of the destruction of natural pipes in landfill conditions lay the groundwork for the development of a mathematical model of the engineering forecast of the residual (non-accident) resource of pipelines operating in oil and gas fields. Проведені натурні випробування газопровідних труб з різною в’язкістю в умовах полігону які максимально наближені до натуральних умов експлуатації газопроводів. Експериментально досліджена кінетика розповсюдження тріщин уздовж зварних з’єднань - їх траєкторія, перехід із зварювального шва в основний метал труби і на оборот, швидкість руху тріщин у в’язкому і крихкому металі та визначені зони пластичної деформації. Відомо, що випробування на зразках Менаже, Шарпі та інших, які мають товщини, не відповідаючи товщині стінок труб, не відображають реальну картину в’язко-пластичних і крихких руйнувань, що не дозволяє розробити методику чи модель прогнозування остаточного ресурсу (безаварійного) газопроводів тривалого терміну експлуатації. В той же час теоретичні і лабораторні дослідження не завжди з достатньою повнотою відповідають на питання, пов’язані безпосередньо із забезпеченням довговічності і безаварійної працездатності трубопроводів. Вірогідно, що в лабораторних умовах підприємств чи наукових закладів важко відтворити і урахувати всі фактори, які характеризують зростання і розповсюдження руйнування в реально діючому газопроводі. Тому дані лабораторних досліджень потрібно перевіряти і обов’язково уточнювати по результатах пневматичних випробувань довгомірних трубних секцій, тобто в теперішній час гостро назріла необхідність поєднання лабораторних і натурних випробувань труб газопровідної мережі. Такі випробування не є масовими, але в результаті їх виконання отримують важливу інформацію стосовно поведінки і властивостей металу в умовах навантаження і експлуатації, найбільш наближених до експлуатаційних. В полігонних випробуваннях використовували труби діаметром 1000х18мм, які пройшли контрольовану прокатку (сталь класу Х70 – марки 06Г2БА) на робочий тиск РР = 9.7 МПа (в північному – низькотемпературному...

  • Open Access

    Influence of operating hours of water pipes in aggressive mediums to degradation of structural steel

    by Валерій Макаренко, Sergey Maksimov, Yulia Makarenko, Tetiana Arhatenko, Viktor Polishchuk, Юлія Макаренко, Тетяна Аргатенко, Віктор Поліщук

    Ruining the design of water pipelines can lead to negative economic and environmental consequences. The usual scientific, technical and technological developments to ensure reliable corrosion-mechanical resistance and durability of water pipelines are not sufficiently systematic, so there is no need to report the reasons, minds and mechanisms of corrosion-mechanical servicing. Laboratory and experimental investigations were carried out in relation to the operation of structural steels on the structure and instead of schoolhouses. The causes and mechanisms of degradation of metal structures due to routine operation in chemically aggressive technological media were studied. X-ray diffraction studies have established that, with increasing service life of pipes, the surface metal balls adsorb a significant amount of gases. It manifests itself especially strongly in the area of corrosion defects (stains, pittings). During regular operation, the metal walls of the pipes are heavily flooded, which leads to a hardening, increased hardness and decreased ductility. There is a significant change in the mass fraction of cementite in the metal, which indicates a decrease in the value of the material and a decrease in its resistance to corrosion-mechanical damage. Such research is a pioneer in the corrosion-mechanical resistance of metal and its degradation during heavy use in the presence of significant pressures and in the immediate presence of aggressive media.

  • Open Access

    Study of the influence of a corrosive environment on long-term fatigue of steel sewer structures

    by Валерій Макаренко, Olga Voytovych, Yulia Makarenko, Volodymyr Gots, Volodymyr Savenko, Oleksii Vladimirov, Oleksii Stogniy, Volodymyr Azutov

    В роботі проводили експериментальні дослідження тривалої втомленості (міцності) сталевих конструкцій каналізаційних підземних споруд Встановлено, що тривала втомленість (міцність) сталевих конструкцій каналізаційних підземних споруд значно зменшується при тривалій експлуатації (особливо при перевищенні терміну 20 років і більше) в хімічно-агресивних середовищах побутово-господарських стоків, що приводить часто до корозійно-механічних руйнувань. Показано, що в процесі тривалого терміну експлуатації суттєво знижуються показники тривалої втоми арматурних сталевих стрижнів залізобетонних конструкцій, що спричиняє утворення тріщин в з’єднанні «арматура-бетон», яке приводить, як правило, до руйнувань залізобетонних труб та конструкцій в цілому.