Abstract
For the first time in the work, systematic and comprehensive experimental studies of the influence of the service life of pipelines on the absorption of hydrogen by pipe steels, which is known to cause embrittlement of the metal, were carried out. In this regard, the microhardness of the structure increases sharply, and the crack resistance parameters of pipe steels also deteriorate. As an additional criterion for hydrogen exposure, the stress intensity factor K1C can be used, which characterizes the potential ability of a metal to resist brittle fracture. The curves of the temperature dependence of the K1C coefficient illustrate the change in the viscosity of steel caused by structural transformations during heat treatment and the subsequent effect of dissolved hydrogen on the metal structure during long-term operation of pipelines in corrosive and aggressive environments, in particular those used in water supply and drainage systems. It is known that the K1C coefficient is very sensitive to changes in the structure, that is, it is a local parameter of crack resistance that must be taken into account when designing and calculating pipeline structures. Additional studies established the dependence of the destruction of pipe steels of the 06G2BA brand, taking into account the preliminary stresses from 0.3σТ to 0.9σТ. Unstressed pipe steels are characterized by the highest resistance to destruction, that is, previous stresses of steel samples weaken the crack resistance of the metal. Additional studies of sulphide corrosion destruction according to the NACE methodology provided an opportunity to determine the susceptibility of pipe steels to corrosion destruction. Steels 06 G2BA and 08HMChА are characterized by the highest corrosion resistance. Уперше в роботі проведені системні та комплексні експериментальні дослідження впливу терміну експлуатації трубопроводів на поглинання трубними сталями водню, який, як відомо, спричиняє окрихчення металу. У зв’язку з цим різко підвищується мікротвердість структури, а також погіршуються параметри тріщиностійкості трубних сталей. Як додатковий критерій впливу водню можна використовувати коефіцієнт інтенсивності напружень К1С, який характеризує потенціальну здатність металу чинити спротив крихким руйнуванням. Криві температурної залежності коефіцієнта К1С ілюструють зміну в’язкості сталі, спричинену структурними перетвореннями при термообробці і подальшим впливом розчиненого водню на структуру металу в процесі тривалої експлуатації трубопроводів в корозійно-агресивних середовищах, зокрема тих, що використовуються в системах водопостачання та водовідведення. Відомо, що коефіцієнт К1С дуже чутливий до зміни структури, тобто являє собою локальний параметр тріщиностійкості, який потрібно враховувати при проєктуванні та розрахунку трубопровідних конструкцій. Додатковим дослідженням встановлена залежність руйнування трубних сталей марки 06Г2БА з урахуванням попередніх напружень від 0,3σТ до 0,9σТ. Найбільш високим спротивом руйнуванню характеризуються ненапружені трубні сталі, тобто попередні напруження сталевих зразків послаблюють тріщиностійкість металу. Додаткові дослідження сульфідного корозійного руйнування згідно з методикою NАСЕ надали можливість визначити схильність трубних сталей до корозійного руйнування. Найбільш високою корозійною стійкістю характеризуються сталі 06Г2БА і 08ХМЧА.

This publication has 7 references indexed in Scilit: