Lucas G. Balzat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lucas G. Balzat has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Bettina Valeska Lotsch
Max Planck Institute for Solid State Research , Heisenbergstrasse 1
9 shared publications - Kristina Gjorgjevikj
Max Planck Institute for Solid State Research
6 shared publications - Simon Krause
Max Planck Institute for Solid State Research
6 shared publications - Igor L. Moudrakovski
Department of Nanochemistry, Max Planck Institute for Solid state research, Heisenbergstraße 1, Stuttgart, Germany, 70569
4 shared publications - Jakob Blahusch
Max Planck Institute for Solid State Research, Department of Nanochemistry , Heisenbergstraße 1
3 shared publications - Arnd Koeppe
Karlsruhe Institute of Technology, Straße am Forum 7, Karlsruhe, Germany, 76313
2 shared publications
Latest Publications
- 11 November 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Mixed Ionic-Electronic Conductivity in K3W2N5 and the Nonconductive K2WN2O
We report on the synthesis of the novel alkali tungsten nitride K3W2N5 and the alkali tungsten oxonitride K2WN2O. Both compounds were synthesized in bulk using the ammonothermal method at 873 K with autogenous pressures between 100 and 175 MPa. The compounds feature zweier chains, ∞1[WNON2/2]2– in K2WN2O and zweier double chains, ∞1[W2N2N6/2]3– in K3W2N5. Temperature-dependent PXRD data revealed an anisotropic thermal expansion along the direction of the anionic chains in both compounds. The compounds are semiconductors with band gaps between 2.14 and 2.24 eV determined by UV/Vis measurements and supported by DFT calculations. Electrochemical impedance spectroscopy measurements revealed K2WN2O to be an insulator and mixed ionic-electronic conductivity in K3W2N5, which makes K3W2N5 the first tungsten nitride-based ionic conductor.
- 11 November 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Mixed Ionic-Electronic Conductivity in K3W2N5 and the Nonconductive K2WN2O
We report on the synthesis of the novel alkali tungsten nitride K3W2N5 and the alkali tungsten oxonitride K2WN2O. Both compounds were synthesized in bulk using the ammonothermal method at 873 K with autogenous pressures between 100 and 175 MPa. The compounds feature zweier chains, ∞1[WNON2/2]2– in K2WN2O and zweier double chains, ∞1[W2N2N6/2]3– in K3W2N5. Temperature-dependent PXRD data revealed an anisotropic thermal expansion along the direction of the anionic chains in both compounds. The compounds are semiconductors with band gaps between 2.14 and 2.24 eV determined by UV/Vis measurements and supported by DFT calculations. Electrochemical impedance spectroscopy measurements revealed K2WN2O to be an insulator and mixed ionic-electronic conductivity in K3W2N5, which makes K3W2N5 the first tungsten nitride-based ionic conductor.
- Open Access
- 1 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (19) , 10330-10340
Lithium Makes the Difference─Evolution of Lithium Vacancy Disorder during Temperature-Induced Phase Transitions of the Li-Ion Conductor Li4SnS4
Sulfide-based lithium-ion solid electrolytes are promising candidates for solid-state batteries due to their high ionic conductivities, although they typically exhibit high moisture sensitivity. Li4SnS4 has recently attracted scientific interest because it exhibits higher moisture resistance than most other sulfide electrolytes. Two orthorhombic Li4SnS4 polymorphs (α and β) are known, yet their temperature-dependent phase behavior remains unexplored. Differential scanning calorimetry and temperature-dependent powder X-ray diffraction revealed that α-Li4SnS4 transitions to β-Li4SnS4 at 96 °C. Furthermore, we identified a second, previously unknown reversible phase transition from β-Li4SnS4 to a new γ-polymorph at 196 °C. Other phase transitions from −150°C to 1000°C were not identified. All polymorphs crystallize in space group Pnma (no. 62) and feature identical zig-zag-like arrangements of SnS44– tetrahedra. The main structural differences lie in the ordering of the lithium substructure. By combining temperature-dependent powder X-ray and neutron diffraction with high-temperature 7Li and 119Sn NMR as well as Raman spectroscopy, we show that Li4SnS4 transitions from the lithium-vacancy-disordered α-phase to the ordered β-phase and finally to the disordered γ-Li4SnS4. Using electrochemical impedance spectroscopy, we measured ionic conductivities from 10–6 S cm–1 to 10–1 S cm–1 between 25 °C to 220 °C. Conductivity changes are gradual, consistent with the subtle structural variations among all polymorphs.
- 1 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (19) , 10330-10340
Open AccessLithium Makes the Difference─Evolution of Lithium Vacancy Disorder during Temperature-Induced Phase Transitions of the Li-Ion Conductor Li4SnS4
Sulfide-based lithium-ion solid electrolytes are promising candidates for solid-state batteries due to their high ionic conductivities, although they typically exhibit high moisture sensitivity. Li4SnS4 has recently attracted scientific interest because it exhibits higher moisture resistance than most other sulfide electrolytes. Two orthorhombic Li4SnS4 polymorphs (α and β) are known, yet their temperature-dependent phase behavior remains unexplored. Differential scanning calorimetry and temperature-dependent powder X-ray diffraction revealed that α-Li4SnS4 transitions to β-Li4SnS4 at 96 °C. Furthermore, we identified a second, previously unknown reversible phase transition from β-Li4SnS4 to a new γ-polymorph at 196 °C. Other phase transitions from −150°C to 1000°C were not identified. All polymorphs crystallize in space group Pnma (no. 62) and feature identical zig-zag-like arrangements of SnS44– tetrahedra. The main structural differences lie in the ordering of the lithium substructure. By combining temperature-dependent powder X-ray and neutron diffraction with high-temperature 7Li and 119Sn NMR as well as Raman spectroscopy, we show that Li4SnS4 transitions from the lithium-vacancy-disordered α-phase to the ordered β-phase and finally to the disordered γ-Li4SnS4. Using electrochemical impedance spectroscopy, we measured ionic conductivities from 10–6 S cm–1 to 10–1 S cm–1 between 25 °C to 220 °C. Conductivity changes are gradual, consistent with the subtle structural variations among all polymorphs.
- Open Access
- 23 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Lithium Makes the Difference–Evolution of Lithium Vacancy Disorder during Temperature-Induced Phase Transitions of the Li-Ion Conductor Li4SnS4
Sulfide-based lithium-ion solid electrolytes are promising candidates for solid-state batteries due to their high ionic conductivities, although they typically exhibit high moisture sensitivity. Li 4 SnS 4 has recently attracted scientific interest because it exhibits higher moisture resistance than most other sulfide electrolytes. Two orthorhombic Li4SnS4 polymorphs (α and β) are known, yet their temperaturedependent phase behavior remains unexplored. Differential scanning calorimetry and temperaturedependent powder X-ray diffraction revealed that α-Li 4 SnS 4 transitions to β-Li 4 SnS 4 at 96 °C. Furthermore, we identified a second, previously unknown reversible phase transition from β-Li 4 SnS 4 to a new γ-polymorph at 196 °C. Other phase transitions from −150 °C to 1000 °C were not identified. All polymorphs crystallize in space group Pnma (no. 62) and feature identical zig-zag-like arrangements of SnS 4 4- tetrahedra. The main structural differences lie in the ordering of the lithium substructure. By combining temperature-dependent powder X-ray and neutron diffraction with high-temperature 7 Li and and 119 Sn NMR as well as Raman spectroscopy, we show that Li 4 SnS 4 transitions from the lithium-vacancy-disordered α-phase to the ordered β-phase and finally to the disordered γ-Li 4 SnS 4 . Using electrochemical impedance spectroscopy, we measured ionic conductivities from 10 −6 S cm −1 to 10 −1 S cm −1 between 25 °C to 220 °C. Conductivity changes are gradual, consistent with the subtle structural variations among all polymorphs.
- 23 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLithium Makes the Difference–Evolution of Lithium Vacancy Disorder during Temperature-Induced Phase Transitions of the Li-Ion Conductor Li4SnS4
Sulfide-based lithium-ion solid electrolytes are promising candidates for solid-state batteries due to their high ionic conductivities, although they typically exhibit high moisture sensitivity. Li 4 SnS 4 has recently attracted scientific interest because it exhibits higher moisture resistance than most other sulfide electrolytes. Two orthorhombic Li4SnS4 polymorphs (α and β) are known, yet their temperaturedependent phase behavior remains unexplored. Differential scanning calorimetry and temperaturedependent powder X-ray diffraction revealed that α-Li 4 SnS 4 transitions to β-Li 4 SnS 4 at 96 °C. Furthermore, we identified a second, previously unknown reversible phase transition from β-Li 4 SnS 4 to a new γ-polymorph at 196 °C. Other phase transitions from −150 °C to 1000 °C were not identified. All polymorphs crystallize in space group Pnma (no. 62) and feature identical zig-zag-like arrangements of SnS 4 4- tetrahedra. The main structural differences lie in the ordering of the lithium substructure. By combining temperature-dependent powder X-ray and neutron diffraction with high-temperature 7 Li and and 119 Sn NMR as well as Raman spectroscopy, we show that Li 4 SnS 4 transitions from the lithium-vacancy-disordered α-phase to the ordered β-phase and finally to the disordered γ-Li 4 SnS 4 . Using electrochemical impedance spectroscopy, we measured ionic conductivities from 10 −6 S cm −1 to 10 −1 S cm −1 between 25 °C to 220 °C. Conductivity changes are gradual, consistent with the subtle structural variations among all polymorphs.
- Open Access
- 3 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Optimize before you Synthesize - Enhancing the Ionic Conductivity of Li7SiPS8 using Bayesian Optimization
Tetragonal Li 7 SiPS 8 is a superionic solid electrolyte, yet its Li ion conductivity suffers from the presence of an amorphous side phase. Attempts to optimize the ionic conductivity, however, are incremental and hence time-consuming, because the relationship between synthesis conditions and electrolyte performance is largely unknown. In this work, we employ Bayesian Optimization (BO) as an efficient design-of-experiment approach to increase the ionic conductivity of the Li 7 SiPS 8 system. Our data-driven workflow reproducibly yields Li 7 SiPS 8 with ionic conductivities exceeding 7mScm −1 at room temperature, an increase by up to 350 % compared to previously reported routes. Simultaneously, the optimized solid-state synthesis lowered the synthesis temperature by 100K (20 %) and shortened the reaction time by 76 h (76 %), delivering a more energy-efficient and, hence, sustainable process. To probe the origin of the increased conductivity, we examined six representative samples by quantitative Rietveld refinements, synchrotron X-ray powder diffraction, pair distribution function analysis, solid-state and pulsed-field-gradient NMR, electron microscopy, and Raman spectroscopy. We demonstrate that BO can help navigate the complex synthesis parameter space, thereby accelerating the development of high-performance sulfide electrolytes for next-generation batteries.
- 3 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOptimize before you Synthesize - Enhancing the Ionic Conductivity of Li7SiPS8 using Bayesian Optimization
Tetragonal Li 7 SiPS 8 is a superionic solid electrolyte, yet its Li ion conductivity suffers from the presence of an amorphous side phase. Attempts to optimize the ionic conductivity, however, are incremental and hence time-consuming, because the relationship between synthesis conditions and electrolyte performance is largely unknown. In this work, we employ Bayesian Optimization (BO) as an efficient design-of-experiment approach to increase the ionic conductivity of the Li 7 SiPS 8 system. Our data-driven workflow reproducibly yields Li 7 SiPS 8 with ionic conductivities exceeding 7mScm −1 at room temperature, an increase by up to 350 % compared to previously reported routes. Simultaneously, the optimized solid-state synthesis lowered the synthesis temperature by 100K (20 %) and shortened the reaction time by 76 h (76 %), delivering a more energy-efficient and, hence, sustainable process. To probe the origin of the increased conductivity, we examined six representative samples by quantitative Rietveld refinements, synchrotron X-ray powder diffraction, pair distribution function analysis, solid-state and pulsed-field-gradient NMR, electron microscopy, and Raman spectroscopy. We demonstrate that BO can help navigate the complex synthesis parameter space, thereby accelerating the development of high-performance sulfide electrolytes for next-generation batteries.
- Open Access
- 26 February 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Optimize before you Synthesize - Enhancing the Ionic Conductivity of Li7SiPS8 using Bayesian Optimization
Tetragonal Li 7 SiPS 8 is a superionic solid electrolyte, yet its Li ion conductivity suffers from the presence of an amorphous side phase. Attempts to optimize the ionic conductivity, however, are incremental and hence time-consuming, because the relationship between synthesis conditions and electrolyte performance is largely unknown. In this work, we employ Bayesian Optimization (BO) as an efficient design-of-experiment approach to increase the ionic conductivity of the Li 7 SiPS 8 system. Our data-driven workflow reproducibly yields Li 7 SiPS 8 with ionic conductivities exceeding 7mScm −1 at room temperature, an increase by up to 350 % compared to previously reported routes. Simultaneously, the optimized solid-state synthesis lowered the synthesis temperature by 100K (20 %) and shortened the reaction time by 76 h (76 %), delivering a more energy-efficient and, hence, sustainable process. To probe the origin of the increased conductivity, we examined six representative samples by quantitative Rietveld refinements, synchrotron X-ray powder diffraction, pair distribution function analysis, solid-state and pulsed-field-gradient NMR, electron microscopy, and Raman spectroscopy. We demonstrate that BO can help navigate the complex synthesis parameter space, thereby accelerating the development of high-performance sulfide electrolytes for next-generation batteries.
- 26 February 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOptimize before you Synthesize - Enhancing the Ionic Conductivity of Li7SiPS8 using Bayesian Optimization
Tetragonal Li 7 SiPS 8 is a superionic solid electrolyte, yet its Li ion conductivity suffers from the presence of an amorphous side phase. Attempts to optimize the ionic conductivity, however, are incremental and hence time-consuming, because the relationship between synthesis conditions and electrolyte performance is largely unknown. In this work, we employ Bayesian Optimization (BO) as an efficient design-of-experiment approach to increase the ionic conductivity of the Li 7 SiPS 8 system. Our data-driven workflow reproducibly yields Li 7 SiPS 8 with ionic conductivities exceeding 7mScm −1 at room temperature, an increase by up to 350 % compared to previously reported routes. Simultaneously, the optimized solid-state synthesis lowered the synthesis temperature by 100K (20 %) and shortened the reaction time by 76 h (76 %), delivering a more energy-efficient and, hence, sustainable process. To probe the origin of the increased conductivity, we examined six representative samples by quantitative Rietveld refinements, synchrotron X-ray powder diffraction, pair distribution function analysis, solid-state and pulsed-field-gradient NMR, electron microscopy, and Raman spectroscopy. We demonstrate that BO can help navigate the complex synthesis parameter space, thereby accelerating the development of high-performance sulfide electrolytes for next-generation batteries.
- Open Access
- 15 August 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (16) , 6127-6139
Structure and Transport Properties in the Pseudobinary Phase System Li4SiS4–Li4SnS4
- 15 August 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (16) , 6127-6139
Open AccessStructure and Transport Properties in the Pseudobinary Phase System Li4SiS4–Li4SnS4
- Open Access
- 20 May 2025
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 28 (15)
Rediscovery of the Forgotten Middle Child: A Comprehensive Study on the Coordination Chemistry of Melam
Melam or bis(4,6‐diamino‐1,3,5‐triazin‐2‐yl)amine is a chemical compound that has already been studied by Liebig almost 200 years ago. Despite this, melam's ability to act as a bidentate ligand has hardly been explored so far. The main focus of this work was therefore to advance the knowledge about melam's coordination chemistry by the synthesis of its complexes with CuCl, CuBr, CuI, CuCN, and AgCl as well as their structural characterization by single crystal and powder X‐ray diffraction. Their crystal structures were found to feature channels along the molecules’ stacking direction. It was further shown that these melam complexes have excellent hydrolytic and thermal stability, making them potentially interesting for heterogeneous catalysis in aqueous media either as promising precursors for polymeric carbon nitrides or possibly already on their own, especially since it should be possible to fine‐tune properties by preparing solid solutions of these melam complexes, which was exemplarily demonstrated between the CuBr and CuI derivatives. Additionally, the crystal structure of melam's HCl salt was elucidated, which proved to be closely related to that of the coordination complex between melam and CuCl, underlining the similar chemical behavior of Cu + and H + toward melam.
- 20 May 2025
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 28 (15)
Open AccessRediscovery of the Forgotten Middle Child: A Comprehensive Study on the Coordination Chemistry of Melam
Melam or bis(4,6‐diamino‐1,3,5‐triazin‐2‐yl)amine is a chemical compound that has already been studied by Liebig almost 200 years ago. Despite this, melam's ability to act as a bidentate ligand has hardly been explored so far. The main focus of this work was therefore to advance the knowledge about melam's coordination chemistry by the synthesis of its complexes with CuCl, CuBr, CuI, CuCN, and AgCl as well as their structural characterization by single crystal and powder X‐ray diffraction. Their crystal structures were found to feature channels along the molecules’ stacking direction. It was further shown that these melam complexes have excellent hydrolytic and thermal stability, making them potentially interesting for heterogeneous catalysis in aqueous media either as promising precursors for polymeric carbon nitrides or possibly already on their own, especially since it should be possible to fine‐tune properties by preparing solid solutions of these melam complexes, which was exemplarily demonstrated between the CuBr and CuI derivatives. Additionally, the crystal structure of melam's HCl salt was elucidated, which proved to be closely related to that of the coordination complex between melam and CuCl, underlining the similar chemical behavior of Cu + and H + toward melam.
- Open Access
- 14 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Structure and transport properties in the pseudo-binary phase system Li4SiS4 – Li4SnS4
Thio-lithium superionic conductors (thio-LISICONs) are a family of promising solid electrolyte materials for potential applications in solid-state batteries. The orthorhombic polymorph of the thio-LISICON Li4SiS4 (o-Li4SiS4) has been known for decades, but its complete crystal structure has been reported only recently. Here, using single crystal X-ray diffraction we reevaluated the crystal structure of o-Li4SiS4 and show that o-Li4SiS4 crystallizes in space group Pmn21 (No. 31, a = 7.7694(15) Å, b = 13.731(3) Å, c = 6.1413(12) Å). The crystal structure of o-Li4SiS4 consists of isolated SiS4 tetrahedra arranged in a zig-zag-type manner, whereas Li atoms are coordinated both tetrahedrally and octahedrally by sulfur atoms of the SiS4 groups. Structures identified by first-principles calculations support the lower symmetry solution presented here, with the Pmn21 polymorph being more stable at room temperature than a higher symmetry phase. By knowing the accurate crystal structure of o-Li4SiS4 we investigated the solid solution behavior with another group IV thio-LISICON, Li4SnS4. Rietveld refinements of powder X-ray diffraction data revealed the solid solution Li4Si1-xSnxS4 (0 ≤ x ≤ 1, Δx = 0.1), which shows a nearly ideal Vegard-type behavior for all silicon-containing samples. 29Si and 119Sn magic-angle-spinning solid-state NMR and Raman spectroscopy showed the presence of SiS4 and SnS4 tetrahedra moieties, with the spectra showing expected behavior consistent with the silicon-tin ratio in the materials. Electrochemical impedance spectroscopy revealed the highest ionic conductivity of 8.4×10-6 S cm-1 at 25 °C for Li4Si0.5Sn0.5S4, accompanied by the lowest migration barrier of ~0.37 eV.
- 14 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessStructure and transport properties in the pseudo-binary phase system Li4SiS4 – Li4SnS4
Thio-lithium superionic conductors (thio-LISICONs) are a family of promising solid electrolyte materials for potential applications in solid-state batteries. The orthorhombic polymorph of the thio-LISICON Li4SiS4 (o-Li4SiS4) has been known for decades, but its complete crystal structure has been reported only recently. Here, using single crystal X-ray diffraction we reevaluated the crystal structure of o-Li4SiS4 and show that o-Li4SiS4 crystallizes in space group Pmn21 (No. 31, a = 7.7694(15) Å, b = 13.731(3) Å, c = 6.1413(12) Å). The crystal structure of o-Li4SiS4 consists of isolated SiS4 tetrahedra arranged in a zig-zag-type manner, whereas Li atoms are coordinated both tetrahedrally and octahedrally by sulfur atoms of the SiS4 groups. Structures identified by first-principles calculations support the lower symmetry solution presented here, with the Pmn21 polymorph being more stable at room temperature than a higher symmetry phase. By knowing the accurate crystal structure of o-Li4SiS4 we investigated the solid solution behavior with another group IV thio-LISICON, Li4SnS4. Rietveld refinements of powder X-ray diffraction data revealed the solid solution Li4Si1-xSnxS4 (0 ≤ x ≤ 1, Δx = 0.1), which shows a nearly ideal Vegard-type behavior for all silicon-containing samples. 29Si and 119Sn magic-angle-spinning solid-state NMR and Raman spectroscopy showed the presence of SiS4 and SnS4 tetrahedra moieties, with the spectra showing expected behavior consistent with the silicon-tin ratio in the materials. Electrochemical impedance spectroscopy revealed the highest ionic conductivity of 8.4×10-6 S cm-1 at 25 °C for Li4Si0.5Sn0.5S4, accompanied by the lowest migration barrier of ~0.37 eV.
- Open Access
- 14 June 2024
- Published by MDPI AG in Inorganics
- Vol. 12 (6) , 166
Sodium Filling in Superadamantoide Na1.36(Si0.86Ga0.14)2As2.98 and the Mixed Valent Arsenidosilicate-Silicide Li1.5Ga0.9Si3.1As4
Na1.36(Si0.86Ga0.14)2As2.98 and Li1.5Ga0.9Si3.1As4 were synthesized by heating mixtures of the elements at 950 °C. The crystal structures were determined by single crystal X-ray diffraction (Na1.36(Si0.86Ga0.14)2As2.98: I41/a, Z = 100, a = 19.8772(4) Å, c = 37.652(1) Å; Li1.5Ga0.9Si3.1As4: C2/c, Z = 8, a = 10.8838(6) Å, b = 10.8821(6) Å, c = 13.1591(7) Å). Na1.36(Si0.86Ga0.14)2As2.98 crystallizes similar to NaSi2P3 with interpenetrating networks of vertex-sharing T4 and T5 supertetrahedra. Gallium substitution at the silicon sites increases the charge of the cluster network, which is compensated for by a 36% higher sodium content. Since in contrast to NaSi2P3, all sodium sites are now fully occupied, there is no significant ion mobility, as indicated by 23Na-NMR. Consequently, the total sodium-ion conductivity of Na1.36(Si0.86Ga0.14)2As2.98 amounts to only 1.6(1) × 10−7 S cm−1 and is therefore three orders of magnitude lower than in NaSi2P3. Li1.5Ga0.9Si3.1As4 crystallizes in a new structure type with layers of edge-sharing (Si1−xGax)As4 tetrahedra alternating with layers that contain infinite Sin zigzag chains. Lithium ions reside in channels between the chains, and thus, the structure does not provide three dimensional pathways for ion conduction and the measured total Li-ion conductivity amounts to only 1.3(1) × 10−7 S cm−1.
- 14 June 2024
- Published by MDPI AG in Inorganics
- Vol. 12 (6) , 166
Open AccessSodium Filling in Superadamantoide Na1.36(Si0.86Ga0.14)2As2.98 and the Mixed Valent Arsenidosilicate-Silicide Li1.5Ga0.9Si3.1As4
Na1.36(Si0.86Ga0.14)2As2.98 and Li1.5Ga0.9Si3.1As4 were synthesized by heating mixtures of the elements at 950 °C. The crystal structures were determined by single crystal X-ray diffraction (Na1.36(Si0.86Ga0.14)2As2.98: I41/a, Z = 100, a = 19.8772(4) Å, c = 37.652(1) Å; Li1.5Ga0.9Si3.1As4: C2/c, Z = 8, a = 10.8838(6) Å, b = 10.8821(6) Å, c = 13.1591(7) Å). Na1.36(Si0.86Ga0.14)2As2.98 crystallizes similar to NaSi2P3 with interpenetrating networks of vertex-sharing T4 and T5 supertetrahedra. Gallium substitution at the silicon sites increases the charge of the cluster network, which is compensated for by a 36% higher sodium content. Since in contrast to NaSi2P3, all sodium sites are now fully occupied, there is no significant ion mobility, as indicated by 23Na-NMR. Consequently, the total sodium-ion conductivity of Na1.36(Si0.86Ga0.14)2As2.98 amounts to only 1.6(1) × 10−7 S cm−1 and is therefore three orders of magnitude lower than in NaSi2P3. Li1.5Ga0.9Si3.1As4 crystallizes in a new structure type with layers of edge-sharing (Si1−xGax)As4 tetrahedra alternating with layers that contain infinite Sin zigzag chains. Lithium ions reside in channels between the chains, and thus, the structure does not provide three dimensional pathways for ion conduction and the measured total Li-ion conductivity amounts to only 1.3(1) × 10−7 S cm−1.