Jakob Blahusch
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jakob Blahusch has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Bettina Valeska Lotsch
Max Planck Institute for Solid State Research , Heisenbergstrasse 1
8 shared publications - Douglas Henry Fabini
Massachusetts Institute of Technology
3 shared publications - Lucas G. Balzat
Max Planck Institute for Solid State Research, Department of Nanochemistry , Heisenbergstraße 1
3 shared publications - Wolfgang Schnick
Department of Chemistry University of Munich (LMU) Munich Germany
3 shared publications - Christian Ochsenfeld
Ludwig-Maximilians-Universität München
2 shared publications - Christian Schneider
Max Planck Institute for Solid State Research, Heisenbergstrasse 1, 70569 Stuttgart, Germany
2 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (19) , 10330-10340
Lithium Makes the Difference─Evolution of Lithium Vacancy Disorder during Temperature-Induced Phase Transitions of the Li-Ion Conductor Li4SnS4
Sulfide-based lithium-ion solid electrolytes are promising candidates for solid-state batteries due to their high ionic conductivities, although they typically exhibit high moisture sensitivity. Li4SnS4 has recently attracted scientific interest because it exhibits higher moisture resistance than most other sulfide electrolytes. Two orthorhombic Li4SnS4 polymorphs (α and β) are known, yet their temperature-dependent phase behavior remains unexplored. Differential scanning calorimetry and temperature-dependent powder X-ray diffraction revealed that α-Li4SnS4 transitions to β-Li4SnS4 at 96 °C. Furthermore, we identified a second, previously unknown reversible phase transition from β-Li4SnS4 to a new γ-polymorph at 196 °C. Other phase transitions from −150°C to 1000°C were not identified. All polymorphs crystallize in space group Pnma (no. 62) and feature identical zig-zag-like arrangements of SnS44– tetrahedra. The main structural differences lie in the ordering of the lithium substructure. By combining temperature-dependent powder X-ray and neutron diffraction with high-temperature 7Li and 119Sn NMR as well as Raman spectroscopy, we show that Li4SnS4 transitions from the lithium-vacancy-disordered α-phase to the ordered β-phase and finally to the disordered γ-Li4SnS4. Using electrochemical impedance spectroscopy, we measured ionic conductivities from 10–6 S cm–1 to 10–1 S cm–1 between 25 °C to 220 °C. Conductivity changes are gradual, consistent with the subtle structural variations among all polymorphs.
- 1 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (19) , 10330-10340
Open AccessLithium Makes the Difference─Evolution of Lithium Vacancy Disorder during Temperature-Induced Phase Transitions of the Li-Ion Conductor Li4SnS4
Sulfide-based lithium-ion solid electrolytes are promising candidates for solid-state batteries due to their high ionic conductivities, although they typically exhibit high moisture sensitivity. Li4SnS4 has recently attracted scientific interest because it exhibits higher moisture resistance than most other sulfide electrolytes. Two orthorhombic Li4SnS4 polymorphs (α and β) are known, yet their temperature-dependent phase behavior remains unexplored. Differential scanning calorimetry and temperature-dependent powder X-ray diffraction revealed that α-Li4SnS4 transitions to β-Li4SnS4 at 96 °C. Furthermore, we identified a second, previously unknown reversible phase transition from β-Li4SnS4 to a new γ-polymorph at 196 °C. Other phase transitions from −150°C to 1000°C were not identified. All polymorphs crystallize in space group Pnma (no. 62) and feature identical zig-zag-like arrangements of SnS44– tetrahedra. The main structural differences lie in the ordering of the lithium substructure. By combining temperature-dependent powder X-ray and neutron diffraction with high-temperature 7Li and 119Sn NMR as well as Raman spectroscopy, we show that Li4SnS4 transitions from the lithium-vacancy-disordered α-phase to the ordered β-phase and finally to the disordered γ-Li4SnS4. Using electrochemical impedance spectroscopy, we measured ionic conductivities from 10–6 S cm–1 to 10–1 S cm–1 between 25 °C to 220 °C. Conductivity changes are gradual, consistent with the subtle structural variations among all polymorphs.
- Open Access
- 23 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Lithium Makes the Difference–Evolution of Lithium Vacancy Disorder during Temperature-Induced Phase Transitions of the Li-Ion Conductor Li4SnS4
Sulfide-based lithium-ion solid electrolytes are promising candidates for solid-state batteries due to their high ionic conductivities, although they typically exhibit high moisture sensitivity. Li 4 SnS 4 has recently attracted scientific interest because it exhibits higher moisture resistance than most other sulfide electrolytes. Two orthorhombic Li4SnS4 polymorphs (α and β) are known, yet their temperaturedependent phase behavior remains unexplored. Differential scanning calorimetry and temperaturedependent powder X-ray diffraction revealed that α-Li 4 SnS 4 transitions to β-Li 4 SnS 4 at 96 °C. Furthermore, we identified a second, previously unknown reversible phase transition from β-Li 4 SnS 4 to a new γ-polymorph at 196 °C. Other phase transitions from −150 °C to 1000 °C were not identified. All polymorphs crystallize in space group Pnma (no. 62) and feature identical zig-zag-like arrangements of SnS 4 4- tetrahedra. The main structural differences lie in the ordering of the lithium substructure. By combining temperature-dependent powder X-ray and neutron diffraction with high-temperature 7 Li and and 119 Sn NMR as well as Raman spectroscopy, we show that Li 4 SnS 4 transitions from the lithium-vacancy-disordered α-phase to the ordered β-phase and finally to the disordered γ-Li 4 SnS 4 . Using electrochemical impedance spectroscopy, we measured ionic conductivities from 10 −6 S cm −1 to 10 −1 S cm −1 between 25 °C to 220 °C. Conductivity changes are gradual, consistent with the subtle structural variations among all polymorphs.
- 23 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLithium Makes the Difference–Evolution of Lithium Vacancy Disorder during Temperature-Induced Phase Transitions of the Li-Ion Conductor Li4SnS4
Sulfide-based lithium-ion solid electrolytes are promising candidates for solid-state batteries due to their high ionic conductivities, although they typically exhibit high moisture sensitivity. Li 4 SnS 4 has recently attracted scientific interest because it exhibits higher moisture resistance than most other sulfide electrolytes. Two orthorhombic Li4SnS4 polymorphs (α and β) are known, yet their temperaturedependent phase behavior remains unexplored. Differential scanning calorimetry and temperaturedependent powder X-ray diffraction revealed that α-Li 4 SnS 4 transitions to β-Li 4 SnS 4 at 96 °C. Furthermore, we identified a second, previously unknown reversible phase transition from β-Li 4 SnS 4 to a new γ-polymorph at 196 °C. Other phase transitions from −150 °C to 1000 °C were not identified. All polymorphs crystallize in space group Pnma (no. 62) and feature identical zig-zag-like arrangements of SnS 4 4- tetrahedra. The main structural differences lie in the ordering of the lithium substructure. By combining temperature-dependent powder X-ray and neutron diffraction with high-temperature 7 Li and and 119 Sn NMR as well as Raman spectroscopy, we show that Li 4 SnS 4 transitions from the lithium-vacancy-disordered α-phase to the ordered β-phase and finally to the disordered γ-Li 4 SnS 4 . Using electrochemical impedance spectroscopy, we measured ionic conductivities from 10 −6 S cm −1 to 10 −1 S cm −1 between 25 °C to 220 °C. Conductivity changes are gradual, consistent with the subtle structural variations among all polymorphs.
- Open Access
- 11 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (29) , 16804-16814
Tuning Connectivity in Hybrid Organic–Inorganic Antimony Halides through Reactant Concentration Effects
We report the synthesis and characterization of two hybrid organic–inorganic (HOI) antimony halides by varying the concentration of Sb2O3, CuCl2, and DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane) in concentrated hydrochloric acid. Different concentrations lead to different antimony oxidation states, resulting in different inorganic substructures ranging from isolated units to layers and a three-dimensional metal halide framework. (DABCOH2)(SbVCl6)Cl (1) contains isolated [SbVCl6]− units separated by the organic cation and chloride. Mixed-valent (DABCOH2)12(SbIII)14(SbV)2Cl79(H3O)3(H2O)33 (2) features a three-dimensional framework of [SbIIICl6]3– units with a previously unknown network topology as well as [SbVCl6]− and an octahedral chloride hydrate cluster with chloride at the center of the water shell. Compound 2 was characterized by single-crystal X-ray diffraction, spectroscopic, and computational methods. A chloride hydrate cluster is also present in the literature-known (DABCOH2)4Sb2IIICu2IICl18(H2O)4, obtained at the highest reactant concentrations and characterized here by solid-state NMR. These compounds show that the chemical space of antimony halides can be systematically expanded by careful reaction control.
- 11 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (29) , 16804-16814
Open AccessTuning Connectivity in Hybrid Organic–Inorganic Antimony Halides through Reactant Concentration Effects
We report the synthesis and characterization of two hybrid organic–inorganic (HOI) antimony halides by varying the concentration of Sb2O3, CuCl2, and DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane) in concentrated hydrochloric acid. Different concentrations lead to different antimony oxidation states, resulting in different inorganic substructures ranging from isolated units to layers and a three-dimensional metal halide framework. (DABCOH2)(SbVCl6)Cl (1) contains isolated [SbVCl6]− units separated by the organic cation and chloride. Mixed-valent (DABCOH2)12(SbIII)14(SbV)2Cl79(H3O)3(H2O)33 (2) features a three-dimensional framework of [SbIIICl6]3– units with a previously unknown network topology as well as [SbVCl6]− and an octahedral chloride hydrate cluster with chloride at the center of the water shell. Compound 2 was characterized by single-crystal X-ray diffraction, spectroscopic, and computational methods. A chloride hydrate cluster is also present in the literature-known (DABCOH2)4Sb2IIICu2IICl18(H2O)4, obtained at the highest reactant concentrations and characterized here by solid-state NMR. These compounds show that the chemical space of antimony halides can be systematically expanded by careful reaction control.
- Open Access
- 28 May 2026
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 652 (11)
More π, less Gap: Band Gap Tuning in Hybrid Antimony Halide Charge Transfer Semiconductors
Organic cations can directly contribute to the electronic structure in hybrid organic–inorganic (HOI) materials, resulting in the formation of charge transfer semiconductors. Systematic tuning of the band gap by varying the organic cation in HOI charge transfer semiconductors remains underexplored. Here, we report the synthesis and characterization of (phenH 2 )SbCl 5 (phenH 2 = 1,10‐phenanthrolinium) and investigate how the extended π‐system influences optical properties compared to the previously reported (2,2‐bpyH 2 )SbCl 5 (2,2‐bpyH 2 = 2,2′‐bipyridinium). Both compounds feature tetrameric [Sb 4 Cl 20 ] 8‐ units and exhibit charge–transfer band gaps. Diffuse‐reflectance spectroscopy shows a red‐shifted absorption onset for (phenH 2 )SbCl 5 relative to (2,2‐bpyH 2 )SbCl 5 . The band gap decreases from 2.6 eV in (2,2‐bpyH 2 )SbCl 5 to 2.1 eV in (phenH 2 )SbCl 5 , a reduction of >0.4 eV. Density‐functional theory (DFT) calculations indicate that this red‐shift arises from increased contribution of the phenanthroline π*‐orbitals to the conduction band. This demonstrates that systematic variation of the organic cation's π‐conjugation can provide a strategy for band gap tuning in charge–transfer HOI antimony halides.
- 28 May 2026
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 652 (11)
Open AccessMore π, less Gap: Band Gap Tuning in Hybrid Antimony Halide Charge Transfer Semiconductors
Organic cations can directly contribute to the electronic structure in hybrid organic–inorganic (HOI) materials, resulting in the formation of charge transfer semiconductors. Systematic tuning of the band gap by varying the organic cation in HOI charge transfer semiconductors remains underexplored. Here, we report the synthesis and characterization of (phenH 2 )SbCl 5 (phenH 2 = 1,10‐phenanthrolinium) and investigate how the extended π‐system influences optical properties compared to the previously reported (2,2‐bpyH 2 )SbCl 5 (2,2‐bpyH 2 = 2,2′‐bipyridinium). Both compounds feature tetrameric [Sb 4 Cl 20 ] 8‐ units and exhibit charge–transfer band gaps. Diffuse‐reflectance spectroscopy shows a red‐shifted absorption onset for (phenH 2 )SbCl 5 relative to (2,2‐bpyH 2 )SbCl 5 . The band gap decreases from 2.6 eV in (2,2‐bpyH 2 )SbCl 5 to 2.1 eV in (phenH 2 )SbCl 5 , a reduction of >0.4 eV. Density‐functional theory (DFT) calculations indicate that this red‐shift arises from increased contribution of the phenanthroline π*‐orbitals to the conduction band. This demonstrates that systematic variation of the organic cation's π‐conjugation can provide a strategy for band gap tuning in charge–transfer HOI antimony halides.
- Open Access
- 2 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Tuning Connectivity in Hybrid Organic-Inorganic Antimony Halides through Reactant Concentration Effects
In this study, we report the synthesis and characterization of two hybrid organic inorganic (HOI) antimony halides using DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane) as the organic cation. Varying the concentration of the starting materials leads to different oxidation states, resulting in different inorganic substructures ranging from isolated units to layers and a new interconnected metal halide framework. The structure of (DABCOH2)SbVCl7 (1) contains isolated [SbVCl6]– units separated by the organic cation. Mixed-valent (DABCOH2)12(SbIII)14(SbV)2Cl79(H3O)3(H2O)12 (2) features an interconnected framework of [SbIIICl6]3– units as well as [SbVCl6]– and an octahedral chloride hydrate cluster. Compound 2, including its chloride hydrate cluster, was characterized by single-crystal X-ray diffraction, spectroscopic methods, and computational methods. Compound 2 was compared to the literature-known mixed-metal HOI (DABCOH2)4SbIII2CuII2Cl18(H2O)4, which was obtained under the highest reactant concentrations. This compound also contains a chloride hydrate cluster, which was identified and characterized by solid state NMR in this work. Compound 2 is the first HOI antimony chloride with an interconnected framework structure, featuring a yet unknown network topology; it also contains the first structurally characterized chloride hydrate cluster, in which the chloride is located in the center of the water shell. These compounds show that by selecting appropriate organic cations and conditions, thechemical space of antimony halides can be systematically expanded by careful reaction control.
- 2 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTuning Connectivity in Hybrid Organic-Inorganic Antimony Halides through Reactant Concentration Effects
In this study, we report the synthesis and characterization of two hybrid organic inorganic (HOI) antimony halides using DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane) as the organic cation. Varying the concentration of the starting materials leads to different oxidation states, resulting in different inorganic substructures ranging from isolated units to layers and a new interconnected metal halide framework. The structure of (DABCOH2)SbVCl7 (1) contains isolated [SbVCl6]– units separated by the organic cation. Mixed-valent (DABCOH2)12(SbIII)14(SbV)2Cl79(H3O)3(H2O)12 (2) features an interconnected framework of [SbIIICl6]3– units as well as [SbVCl6]– and an octahedral chloride hydrate cluster. Compound 2, including its chloride hydrate cluster, was characterized by single-crystal X-ray diffraction, spectroscopic methods, and computational methods. Compound 2 was compared to the literature-known mixed-metal HOI (DABCOH2)4SbIII2CuII2Cl18(H2O)4, which was obtained under the highest reactant concentrations. This compound also contains a chloride hydrate cluster, which was identified and characterized by solid state NMR in this work. Compound 2 is the first HOI antimony chloride with an interconnected framework structure, featuring a yet unknown network topology; it also contains the first structurally characterized chloride hydrate cluster, in which the chloride is located in the center of the water shell. These compounds show that by selecting appropriate organic cations and conditions, thechemical space of antimony halides can be systematically expanded by careful reaction control.
- Open Access
- 9 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Tuning Connectivity in Hybrid Organic-Inorganic Antimony Halides through Reactant Concentration Effects
In this study, we report the synthesis and characterization of two hybrid organic in- organic (HOI) antimony halides using DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane) as the organic cation. Varying the concentration of the starting materials leads to dif- ferent oxidation states, resulting in different inorganic substructures ranging from iso- lated units to layers and a new interconnected metal halide framework. The structure of (DABCOH2)SbVCl7 (1) contains isolated [SbVCl6]– units separated by the organic cation. Mixed-valent (DABCOH2)12(SbIII)14(SbV)2Cl79(H3O)3(H2O)12 (2) features an interconnected framework of [SbIIICl6]3– units as well as [SbVCl6]– and an unprecedented octahedral chloride hydrate cluster. The material as well as the chloride hydrate cluster were characterized via single crystal X-ray diffraction and spectroscopic methods. Compound 2 was compared to the literature-known mixed-metal HOI (DABCOH2)4SbIII 2CuII 2Cl18(H2O)4, 1 which was obtained under the highest reactant concentrations. (DABCOH2)4SbIII 2CuII 2Cl18(H2O)4 also contains a chloride hydrate cluster, which was identified and characterized by solid state NMR in this work. Compound 2 is the first HOI antimony chloride with an interconnected framework structure, featuring a yet unknown network topology; it also contains the first structurally characterized chloride hydrate cluster, in which the chloride is located in the center of the wa- ter shell. These compounds show that by selecting appropriate organic cations and conditions, the chemical space of antimony halides can be systematically expanded by careful reaction control.
- 9 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTuning Connectivity in Hybrid Organic-Inorganic Antimony Halides through Reactant Concentration Effects
In this study, we report the synthesis and characterization of two hybrid organic in- organic (HOI) antimony halides using DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane) as the organic cation. Varying the concentration of the starting materials leads to dif- ferent oxidation states, resulting in different inorganic substructures ranging from iso- lated units to layers and a new interconnected metal halide framework. The structure of (DABCOH2)SbVCl7 (1) contains isolated [SbVCl6]– units separated by the organic cation. Mixed-valent (DABCOH2)12(SbIII)14(SbV)2Cl79(H3O)3(H2O)12 (2) features an interconnected framework of [SbIIICl6]3– units as well as [SbVCl6]– and an unprecedented octahedral chloride hydrate cluster. The material as well as the chloride hydrate cluster were characterized via single crystal X-ray diffraction and spectroscopic methods. Compound 2 was compared to the literature-known mixed-metal HOI (DABCOH2)4SbIII 2CuII 2Cl18(H2O)4, 1 which was obtained under the highest reactant concentrations. (DABCOH2)4SbIII 2CuII 2Cl18(H2O)4 also contains a chloride hydrate cluster, which was identified and characterized by solid state NMR in this work. Compound 2 is the first HOI antimony chloride with an interconnected framework structure, featuring a yet unknown network topology; it also contains the first structurally characterized chloride hydrate cluster, in which the chloride is located in the center of the wa- ter shell. These compounds show that by selecting appropriate organic cations and conditions, the chemical space of antimony halides can be systematically expanded by careful reaction control.
- Open Access
- 3 July 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (14) , 5027-5035
Predict before You Precipitate: Learning Templating Effects in Hybrid Antimony and Bismuth Halides
- 3 July 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (14) , 5027-5035
Open AccessPredict before You Precipitate: Learning Templating Effects in Hybrid Antimony and Bismuth Halides
- Open Access
- 20 May 2025
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 28 (15)
Rediscovery of the Forgotten Middle Child: A Comprehensive Study on the Coordination Chemistry of Melam
Melam or bis(4,6‐diamino‐1,3,5‐triazin‐2‐yl)amine is a chemical compound that has already been studied by Liebig almost 200 years ago. Despite this, melam's ability to act as a bidentate ligand has hardly been explored so far. The main focus of this work was therefore to advance the knowledge about melam's coordination chemistry by the synthesis of its complexes with CuCl, CuBr, CuI, CuCN, and AgCl as well as their structural characterization by single crystal and powder X‐ray diffraction. Their crystal structures were found to feature channels along the molecules’ stacking direction. It was further shown that these melam complexes have excellent hydrolytic and thermal stability, making them potentially interesting for heterogeneous catalysis in aqueous media either as promising precursors for polymeric carbon nitrides or possibly already on their own, especially since it should be possible to fine‐tune properties by preparing solid solutions of these melam complexes, which was exemplarily demonstrated between the CuBr and CuI derivatives. Additionally, the crystal structure of melam's HCl salt was elucidated, which proved to be closely related to that of the coordination complex between melam and CuCl, underlining the similar chemical behavior of Cu + and H + toward melam.
- 20 May 2025
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 28 (15)
Open AccessRediscovery of the Forgotten Middle Child: A Comprehensive Study on the Coordination Chemistry of Melam
Melam or bis(4,6‐diamino‐1,3,5‐triazin‐2‐yl)amine is a chemical compound that has already been studied by Liebig almost 200 years ago. Despite this, melam's ability to act as a bidentate ligand has hardly been explored so far. The main focus of this work was therefore to advance the knowledge about melam's coordination chemistry by the synthesis of its complexes with CuCl, CuBr, CuI, CuCN, and AgCl as well as their structural characterization by single crystal and powder X‐ray diffraction. Their crystal structures were found to feature channels along the molecules’ stacking direction. It was further shown that these melam complexes have excellent hydrolytic and thermal stability, making them potentially interesting for heterogeneous catalysis in aqueous media either as promising precursors for polymeric carbon nitrides or possibly already on their own, especially since it should be possible to fine‐tune properties by preparing solid solutions of these melam complexes, which was exemplarily demonstrated between the CuBr and CuI derivatives. Additionally, the crystal structure of melam's HCl salt was elucidated, which proved to be closely related to that of the coordination complex between melam and CuCl, underlining the similar chemical behavior of Cu + and H + toward melam.
- Open Access
- 19 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Predict Before You Precipitate: Learning Templating Effects in HOI Antimony and Bismuth Halides
Hybrid organic-inorganic (HOI) antimony and bismuth halides exhibit diverse structural features and have been studied intensely for their promising electronic and optical properties. There are well-explored structure-property relations for these materials. However, a thorough understanding of synthesis routes and templating effects is lacking, turning their targeted synthesis into an open challenge. In this study, we assemble a literature data set of established HOI material candidates and train an explainable machine learning (ML) classification model to explore the templating effects in more detail. With a classification accuracy upwards of 70%, our model is effective in predicting HOI structure types based on the reactants and points out several structural and electrostatic design features for the organic cation that influence the inorganic substructure most strongly. We further demonstrate the validity of our classifier on 9 newly synthesized members of this materials class and propose incremental learning routes to expand the model in future research.
- 19 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPredict Before You Precipitate: Learning Templating Effects in HOI Antimony and Bismuth Halides
Hybrid organic-inorganic (HOI) antimony and bismuth halides exhibit diverse structural features and have been studied intensely for their promising electronic and optical properties. There are well-explored structure-property relations for these materials. However, a thorough understanding of synthesis routes and templating effects is lacking, turning their targeted synthesis into an open challenge. In this study, we assemble a literature data set of established HOI material candidates and train an explainable machine learning (ML) classification model to explore the templating effects in more detail. With a classification accuracy upwards of 70%, our model is effective in predicting HOI structure types based on the reactants and points out several structural and electrostatic design features for the organic cation that influence the inorganic substructure most strongly. We further demonstrate the validity of our classifier on 9 newly synthesized members of this materials class and propose incremental learning routes to expand the model in future research.
- Open Access
- 18 February 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (19) , e202500271
Pyrrolation of Melem: A Facile Gateway into the Field of Monomeric s‐Heptazine Chemistry
Monomeric s‐heptazines are an intriguing class of compounds with many attractive properties for various areas of application such as photocatalysis or organic light‐emitting diodes. However, research into these properties has so far been challenging, as only a few synthetic routes for the preparation of monomeric s‐heptazines are known in the literature. Furthermore, these few reported synthetic pathways generally require the use of specialized equipment that may not be available to all laboratories interested in studying monomeric s‐heptazines. For this reason, a more accessible synthetic route for the preparation of monomeric s‐heptazines has been developed in the course of this work. The central compound of this new approach is 2,5,8‐tri(1H‐pyrrol‐1‐yl)‐s‐heptazine, which could be conveniently synthesized via an acid catalyzed pyrrolation of melem with bench‐stable 2,5‐dimethoxytetrahydrofuran in a simple one‐pot synthesis in air. This compound was shown to be a potent starting material for the synthesis of numerous other monomeric s‐heptazines by reaction with both nucleophiles and electrophiles. The monomeric s‐heptazines thus accessible were analyzed for their crystal structures by single crystal X‐ray diffraction and for their optical properties by ultraviolet/visible and photoluminescence spectroscopy.
- 18 February 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (19) , e202500271
Open AccessPyrrolation of Melem: A Facile Gateway into the Field of Monomeric s‐Heptazine Chemistry
Monomeric s‐heptazines are an intriguing class of compounds with many attractive properties for various areas of application such as photocatalysis or organic light‐emitting diodes. However, research into these properties has so far been challenging, as only a few synthetic routes for the preparation of monomeric s‐heptazines are known in the literature. Furthermore, these few reported synthetic pathways generally require the use of specialized equipment that may not be available to all laboratories interested in studying monomeric s‐heptazines. For this reason, a more accessible synthetic route for the preparation of monomeric s‐heptazines has been developed in the course of this work. The central compound of this new approach is 2,5,8‐tri(1H‐pyrrol‐1‐yl)‐s‐heptazine, which could be conveniently synthesized via an acid catalyzed pyrrolation of melem with bench‐stable 2,5‐dimethoxytetrahydrofuran in a simple one‐pot synthesis in air. This compound was shown to be a potent starting material for the synthesis of numerous other monomeric s‐heptazines by reaction with both nucleophiles and electrophiles. The monomeric s‐heptazines thus accessible were analyzed for their crystal structures by single crystal X‐ray diffraction and for their optical properties by ultraviolet/visible and photoluminescence spectroscopy.