Qi Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qi Chen has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Chao Huang
School of Civil and Hydraulic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
1 shared publication - Jialiang Liu
Anhui Xinlu Construction Group Co., Ltd., Fuyang 236001, China
1 shared publication - Junwen Pei
School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430073, China
1 shared publication - Ruiyang Wang
School of Materials Science and Engineering, Chang’an University, Xi’an 710061, China
1 shared publication - Weili Shen
School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430073, China
1 shared publication - Xiong Xu
School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430074, China
1 shared publication
Latest Publications
- Open Access
- 20 June 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (12) , 5234
Performance Evaluations of Warm-Mix Reaction-Rejuvenated SBS Modified Asphalt Mixtures Incorporated with Wax-Based Additive
The high-performance, cleaner rejuvenation of aged SBS-modified asphalt mixtures (ASBSMAMs) has been a hotspot in asphalt research. Currently, the most popular rejuvenation method still involves hot-mix asphalt with a commonly used oil as the rejuvenator for recycling. However, high-quality, cleaner warm-mix rejuvenation technology for ASBSMAMs is still needed to enrich this field. This study considered adopting a polyurethane (PU) prepolymer and 1,4-butanediol diglycidyl ether (BUDGE) as reactive rejuvenators to achieve warm-mix reaction–rejuvenation to enhance the properties of ASBSMAMs with the use of a wax-based additive, Sasobit. A series of tests were conducted to realize this, including the viscosity–temperature correlation of the rejuvenated binders, as well as tests of the moisture-induced damage, high-temperature stability, low-temperature cracking resistance, and fatigue resistance of the rejuvenated mixtures. The results showed the following: through reaction–rejuvenation, Sasobit could reduce the viscosity of the rejuvenated SBSMA (RSBSMA) below 150 °C for warm mixing and slightly decrease the viscosity–temperature susceptibility; warm-mix reaction–rejuvenation helped to improve the resistance to water-immersion-induced damage and freeze–thaw damage in ASBSMAMs; the addition of Sasobit showed benefits in improving their resistance to permanent deformation, with the dynamic stability values exceeding 5700 pass/mm as more than 1% Sasobit was added; the flexural damage resistance of ASBSMAMs at low temperatures could be enhanced after warm-mix reaction–rejuvenation; and, under reaction–rejuvenation conditions, Sasobit did not reduce the fatigue resistance of the RSBSMAM and, conversely, at limited higher dosages, it worked more effectively. Overall, the studied warm-mix reaction–rejuvenation technology has been proven to be effective for the environmental recycling and reuse of ASBSMAMs at high quality.
- 20 June 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (12) , 5234
Open AccessPerformance Evaluations of Warm-Mix Reaction-Rejuvenated SBS Modified Asphalt Mixtures Incorporated with Wax-Based Additive
The high-performance, cleaner rejuvenation of aged SBS-modified asphalt mixtures (ASBSMAMs) has been a hotspot in asphalt research. Currently, the most popular rejuvenation method still involves hot-mix asphalt with a commonly used oil as the rejuvenator for recycling. However, high-quality, cleaner warm-mix rejuvenation technology for ASBSMAMs is still needed to enrich this field. This study considered adopting a polyurethane (PU) prepolymer and 1,4-butanediol diglycidyl ether (BUDGE) as reactive rejuvenators to achieve warm-mix reaction–rejuvenation to enhance the properties of ASBSMAMs with the use of a wax-based additive, Sasobit. A series of tests were conducted to realize this, including the viscosity–temperature correlation of the rejuvenated binders, as well as tests of the moisture-induced damage, high-temperature stability, low-temperature cracking resistance, and fatigue resistance of the rejuvenated mixtures. The results showed the following: through reaction–rejuvenation, Sasobit could reduce the viscosity of the rejuvenated SBSMA (RSBSMA) below 150 °C for warm mixing and slightly decrease the viscosity–temperature susceptibility; warm-mix reaction–rejuvenation helped to improve the resistance to water-immersion-induced damage and freeze–thaw damage in ASBSMAMs; the addition of Sasobit showed benefits in improving their resistance to permanent deformation, with the dynamic stability values exceeding 5700 pass/mm as more than 1% Sasobit was added; the flexural damage resistance of ASBSMAMs at low temperatures could be enhanced after warm-mix reaction–rejuvenation; and, under reaction–rejuvenation conditions, Sasobit did not reduce the fatigue resistance of the RSBSMAM and, conversely, at limited higher dosages, it worked more effectively. Overall, the studied warm-mix reaction–rejuvenation technology has been proven to be effective for the environmental recycling and reuse of ASBSMAMs at high quality.