ZHZiqian Hu

Ziqian Hu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ziqian Hu has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Wide-Range Self-Powered Current Measurement Method Based on Induced Current Multiplexing for Online Monitoring Devices in Transmission Lines

    by Zhaowei Liu, Yong Li, Ziqian Hu, Zeyu Zang, Xianglin Wen, Zhengyou He

    To address saturation issues in current measurement devices under high currents, a winding wound on the core, driven by a power amplifier, is utilized to counterbalance the magnetic field generated by the measured current in the traditional method. However, this method consumes a significant amount of energy, and the power consumption increases under higher currents, limiting its applicability. To address this vital problem, a wide-range self-powered current measurement method is proposed in this work. The dual-core structure-based self-powered current measurement system integrates a magnetic field energy harvester (MFEH) and a current measurer (CM). In this system, the windings of the MFEH and the CM are connected in series, and the induced current of the MFEH is multiplexed. On one hand, it flows through the load for energy harvesting. Simultaneously, it flows into the CM, reducing the magnetic field within the air gap, and thereby broadening the range of current measurements. Besides, the equivalent circuit model of the dual-core structure is established to analyze the principles of current measurement and energy harvesting. Subsequently, a voltage regulation circuit based on an active rectifier is implemented, which can mitigate the saturation of the magnetic core over a wide current range. A laboratory prototype is built to verify the effectiveness of the proposal. The results show that the output voltage can be maintained at 3.3 V, ensuring stable voltage output. At 300 A $_{\mathbf{rms}}$ , the maximum harvesting power reaches 1.83 W. Additionally, the upper limit of the measured current can reach 600 A $_{\mathbf{rms}}$ , with a maximum error of 0.54%.


  • A Maximum-Power-Point Tracking Method Based on Constant Conduction Time Control With Constant Voltage Output for Magnetic Field Energy Harvesters in the Saturated Region

    by Zhaowei Liu, Yong Li, Xianglin Wen, Ziqian Hu, Huanyu Yang, Zhengyou He

    To improve the power density of magnetic field energy harvesters (MFEHs) and supply stable voltage output, a maximum-power-point tracking (MPPT) method with constant voltage (CV) output for the MFEH in the saturated region is proposed. The proposed MFEH system consists of a bidirectional buck-boost converter connected with a supercapacitor and an active rectifier. The bidirectional buck-boost converter is employed for CV output control, and MPPT under CV output conditions is realized by controlling the conduction time of the active rectifier. Besides, the calculation formula for the optimal conduction time in the saturated region is derived, which is constant and does not vary with the primary current. Subsequently, the optimal coil turn design method of the MFEH under optimal conduction time control is proposed, which can be used to guide the design of the coil turns. An experimental prototype is constructed to verify the effectiveness of the proposal. Experimental results demonstrate that the output voltage can be maintained at 3.3V, and CV output can be realized. Besides, compared to conventional methods, the output power of the MFEH with the proposed method at 50 Arms increases from 0.47 W to 0.60 W, achieving a 27% improvement.