GGGuseyn Gurbanov

Guseyn Gurbanov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guseyn Gurbanov has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis, structural characterization and corrosion inhibition performance of propargyl- and allyl-containing aryloxy alcohol derivatives in H₂S medium

    by Rufat Azizov, Guseyn Gurbanov, Aysel Gasimzade, Ali Rahimli, Ramin Eyvazli

    Two novel aryloxy alcohol derivatives, one containing a terminal C≡C bond (RH-1) and an allyl ether containing a C=C bond (RH-2), were synthesized and evaluated as corrosion inhibitors for St-3 carbon steel in a hydrogen sulphide (H₂S)-containing medium. Their molecular structures were characterized by Fourier-transform infrared (FTIR) spectro­scopy and nuclear magnetic resonance - ¹H NMR and ¹³C NMR. Corrosion inhibition performance was investigated using gravimetric measurements, electrochemical impe­dance spectroscopy (EIS), potentiodynamic polarization, surface characterization and density functional theory (DFT) calculations. Gravimetric experiments were conducted over the temperature range of 25 to 50 °C using inhibitor concentrations of 10 to 30 ppm. Both compounds effectively reduced the corrosion rate, with inhibition efficiency increasing with inhibitor concentration. At 25 °C and 30 ppm, EIS showed maximum inhibition efficiencies of 97.0 % for RH-1 and 94.0 % for RH-2. EIS measurements showed a substantial increase in charge-transfer resistance and a decrease in double-layer capacitance, consistent with progressive inhibitor adsorption and formation of a protective interfacial layer. Surface analyses further supported the formation of protective inhibitor-containing films on the steel surface. DFT calculations indicated greater electron-donating ability and a stronger adsorption tendency for RH-1, consistent with its superior experimental inhibition performance. The higher efficiency of RH-1 was associated with its propargyl (C≡C) functionality, which promotes stronger interaction with the steel surface than the allyl (C=C) functionality of RH-2. The combined experimental and theoretical results demonstrate that these aryloxy alcohol derivatives provide effective corrosion inhibition of carbon steel in H₂S-containing environments.

  • Open Access

    Investigation of the synchronous effect of a magnetic field and a depressor additive on the rheological parameters of high-paraffin crude oil

    by Guseyn Gurbanov, Nargiz Akhundova

    Relevance. High-paraffin, resinous crude oils are characterized by high viscosity and elevated pour points, which become particularly problematic under low-temperature conditions. These properties significantly complicate pipeline transportation due to increased hydraulic resistance, higher energy consumption, and flow instability. Therefore, improving the rheological properties of such oils is essential for ensuring efficient and reliable transportation. Effect of a magnetic field treatment and depressor additives are considered promising methods for viscosity and pour point reduction. Aim. To investigate the individual and combined effects of magnetic field treatment and the depressor additive Difron-3907 on the rheological properties of high-paraffin, resinous crude oil; to determine the optimal effect of a magnetic field exposure time, the effective additive concentration, and the efficiency of their combined application. Methods. Laboratory experiments were conducted using a Reotest viscometer. Oil viscosity was measured before and after effect of a magnetic field treatment and the addition of Difron-3907 at concentrations ranging from 100 to 700 ppm. Effect of a magnetic field exposure times varied between 5 and 25 minutes. The physicochemical properties of the crude oil sample were initially determined, and long-term viscosity stability was monitored over 25 days under optimal treatment conditions. Results and conclusions. 25-minute effect of a magnetic field treatment reduced oil viscosity from 2200 to 1000 mPa·s, corresponding to a 54.5% decrease. The addition of Difron-3907 at an optimal concentration of 700 ppm resulted in a viscosity reduction to 1210 mPa·s (approximately 45%). The highest efficiency was achieved through combined treatment: a 20-minute effect of a magnetic field exposure together with 350 ppm Difron-3907 reduced viscosity to 600 mPa·s, representing a 72.7% decrease. These findings demonstrate that the combined application of effect of a magnetic field waves and Difron-3907 significantly enhances the rheological properties of high-paraffin, resinous crude oils, contributing to reduced energy consumption and improved efficiency of pipeline transportation processes. For citation: Gurbanov G.R., Akhundova N.R. Investigation of the synchronous effect of a magnetic field and a depressor additive on the rheological parameters of high-paraffin crude oil. Bulletin of the Tomsk Polytechnic University. Geo Assets Engineering, 2026, vol. 337, no. 8, pp. 129–139. http://doi.org/10.18799/24131830/2026/8/5438

  • Evaluation of pomegranate peel extract as a green corrosion inhibitor in various aggressive environments

    by X. Wang, G.R. Gurbanov, G.F. Mammadova, Z.A. Abdullayeva, Z.Y. Xin

    Corrosion of metals in aqueous environments containing dissolved acid gases (such as H2S and CO2) is a major challenge for the oil and gas industry, resulting in significant financial losses and serious safety hazards. This study investigates the corrosion inhibition performance of a green inhibitor derived from pomegranate peel extract (PG) for St3 grade carbon steel in H2S, H2S+CO2, and neutral media. Gravimetric (weight-loss), potentiodynamic polarization (PP), and electrochemical impedance spectroscopy (EIS) measurements were conducted at 25–45℃ with extract concentrations of 100–500 ppm. The synergistic effect of sodium iodide (NaI) was also evaluated. PG extract acts as a mixed-type inhibitor, effectively suppressing both anodic and cathodic reactions. Inhibition efficiency (IE) demonstrates a positive correlation with both concentration and temperature. At an optimal concentration of 500 ppm and 45℃, IE reaches 96.8% in H2S and 97.5% in H2S+CO2 medium. In neutral medium at 500 ppm, maximum IE (98.8%) was observed at 25℃, with a slight decrease to 89.7% at 45℃. The addition of NaI exhibited a synergistic effect, further enhancing inhibition performance. Adsorption behavior follows the Langmuir isotherm, with negative  G 0 ads values ranging from –22.4 to –25.4 kJ∙mol–1, indicating spontaneous adsorption with mixed physisorption–chemisorption character. These findings establish pomegranate peel extract as a viable, environmentally benign, and cost-effective corrosion inhibitor for carbon steel pipelines in aggressive oil-field environments.

  • Study of the synergistic effect of plant-derived and synthesized inhibitor systems against corrosion

    by G.R. Gurbanov, S.M. Pashayeva, G.M. Talybov, N. Shirinova, I. Ozdemir, Z.Y. Xin

    In this research work, the preparation of multifunctional compositions based on green inhibitors for multicomponent aggressive corrosion environments (H2S, CO2, their combined effect and sulfate-reducing bacteria) widespread in the oil and gas industry and a comprehensive experimental evaluation of their corrosion protection properties were carried out. Within the framework of the research, an inhibitor system based on plant-derived Gossypol resin and a newly synthesized organic compound with the conditional name “Marza-3” was studied. The corrosion rate was determined by the gravimetric method in a model produced water environment saturated with H2S and CO2, as well as in the coexistence of these gases. In addition, the effect of the prepared compositions on the activity of sulfate-reducing bacteria (Desulfovibrio desulfuricans and Desulfomicrobium) and the formation of biogenic hydrogen sulfide was also investigated. The results obtained showed that the compositions obtained by combining the components in an equimolar ratio (1:1) showed a high protective effect, reducing the corrosion rate by 96–99%, and at the same time weakening the activity of SRB bacteria by 94–98%. A strong statistical relationship (R2=0.947) was established between corrosion inhibition and the reduction of biogenic H2S. The results prove that the proposed inhibitor systems simultaneously affect the electrochemical and microbiological corrosion mechanisms, reducing their intensity, and in this regard can be considered promising for application in the oil and gas industry.

  • Open Access

    Investigation of the efficiency of demulsifiers in breaking stable water–oil emulsions

    by Guseyn Gurbanov, Manaf Manafov, Hajar Aliyeva

    The article explores the mechanism of the effect of reagents used for the demulsification of stable water-oil emulsions, which are widespread in oil production and transportation processes. In this regard, the demulsifying properties of the DR-1502 demulsifier used in SOCAR and the new YK-1 composition prepared on its basis are comparatively studied at different temperatures. The studies are conducted in laboratory conditions, and the reduction in the residual water content and the rate of emulsion separation into phases are taken as the main evaluation criteria for each system. The experiments conducted show that the temperature factor directly affects the stability of the emulsion. Thus, when the temperature increases, the emulsion breakdown intensifies, and the separation of the water phase significantly increases. The highest effectiveness of the DR-1502 demulsifier is achieved at a temperature of 70°C and a concentration of 1000 ppm, and at this time the residual water content decreases to the minimum. YK-1 shows the same performance at lower temperatures and at half the concentration, as the acetone enhances diffusion and surface activity. The results show that YK-1 synergistically enhances DR-1502, increasing its interfacial activity and enabling demulsification with lower energy use.

  • Open Access

    ENERGY SAVINGS THROUGH THE APPLICATION OF EFFICIENT COMPOSITIONS IN THE PREPARATION OF HEAVY OILS FOR TRANSPORTATION

    by G.R. Gurbanov, A.V. Gasimzade, Z.A. Abdullayeva

    The preparation of high-viscosity crude oils, which contain high-molecular-weight compounds and exhibit complex anomalous rheological properties, for transportation under field conditions remains a pressing issue. Efficient dehydration and desalting of such oils are critical because their preparation for transportation typically requires high temperatures. Although high temperatures facilitate the separation of water from oil, they also lead to the evaporation and loss of light hydrocarbons, which readily transition into vapor. Consequently, this results in both hydrocarbon losses and the release of light gaseous compounds into the atmosphere, contributing to environmental pollution and an increase in carbon emissions. Therefore, the selection of an appropriate reagent for the preparation of anomalous crude oils for transportation is of utmost importance. The addition of highly effective demulsifiers at optimal concentrations can facilitate the demulsification process at lower temperatures. This approach not only reduces the consumption of reagents and energy but also saves time and extends the operational lifespan of processing equipment. Thus, the application of an effective demulsifier minimizes raw material and energy consumption while simultaneously mitigating environmental impact. Moreover, the use of a demulsifier with strong demulsification properties simplifies the complex transportation preparation technology, ensuring that the crude oil maintains a high-quality composition. In this context, the present study analyzes the results of laboratory experiments conducted to evaluate the application of new compositions with high surface activity for the breakdown of emulsions with the aforementioned properties. For the research process, crude oil samples were collected from the Absheron, Sangachal, and Dashgil fields with water content levels of 35 %, 30 %, and 32 %, respectively. Four new compositions, designated as AZ-1, AZ-2, AZ-3, and AZ-4, were synthesized using various molar ratios of different demulsifying agents with similar functional purposes. A comprehensive analysis of numerous experimental results has demonstrated that the new compositions exhibit significantly higher efficiency compared to their individual components. The effectiveness of the compositions in the demulsification process of crude oil samples with anomalous properties was calculated based on the obtained results. It was determined that at an optimal concentration and a temperature of 50 °C, the efficiency of the AZ-1, AZ-2, AZ-3, and AZ-4 compositions for the Absheron, Sangachal, and Dashgil crude oil samples was 97.2 %, 98.0 %, and 97.5 %; 98.8 %, 99.2 %, and 99.0 %; 98.5 %, 99.0 %, and 98.7 %; 99.8 %, 99.9 %, and 99.8 %, respectively. Bibl. 25, Tab. 3, Fig. 4.


  • Open Access

    STUDY OF THE EFFECT OF PHYSİCO-CHEMİCAL PROPERTİES ON THE RHEOLOGİCAL PROPERTİES OF HİGH-PARAFFİN OİLS

    by G.R. Gurbanov, A.V. Gasimzade, L.A. Abbasova

    For the first time, the joint effect of magnetic field, Difron-4201 depressor additive, new composition with conventional name N-1 and N-1 + magnetic field on paraffin deposition and freezing temperature in high-paraffin oil was studied. Laboratory experiments on paraffin deposition were performed by the “cold tube” method and the surface temperature of the tube was 5, 10, 15, 20, and 25 °C. The greatest decrease in the amount of paraffin deposits at different temperatures was caused by the influence of the combined method. The physical, chemical and physico-chemical effect on the freezing temperature of high-paraffin oil was carried out according to a known standard method. At this time, 600 g/t of Difron-4201 depressant additive and 500 g/t of N-1 composition were considered as the optimal usage rate. As in paraffin precipitation, the most effective influence on freezing temperature was with the presence of N-1 + magnetic field composition. It was also determined that the effect of magnetic field, Difron-4201 depressor additive, new composition with conventional name N-1 and N-1 + magnetic field on the effective viscosity of high-paraffin oil was obtained by the combined method. In order to study the bactericidal property, the effect of the new composition N-1 on the development of sulfate-reducing bacteria was also studied in laboratory conditions in Postgate-B nutrient medium for fifteen days, and its bactericidal effect was calculated. It was found that composition N-1 shows the highest bactericidal effect at a concentration of 500 g/t, and at this time the value of S is 97 %. Thus, it is possible to carry out pipeline transportation of highly paraffinic oils in cold climates without heating by using electricity at intermediate stations. This, in turn, provides energy savings. On the other hand, environmental protection is ensured by reducing the corrosion rate to a minimum, increasing the service life of pipelines and eliminating possible hydrocarbon losses. The possibility of reducing paraffin deposits by using the developed combined method can be applied when application fuel oil in heat and power generation. Bibl. 25, Fig. 3, Tab. 5.