AGAysel Gasimzade

Aysel Gasimzade

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aysel Gasimzade has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    LOW-ENERGY DEMULSIFICATION STRATEGIES FOR CRUDE OIL EMULSIONS BASED ON OPTIMIZED MULTICOMPONENT SYSTEMS

    by A.V. Gasimzade, R.R. Khalilzade

    In this work, the demulsification behavior of 35 % water-in-oil Muradkhanli crude oil emulsions was systematically examined using both individual demulsifiers and their composite formulations. The individual reagents — ALKAN-318, ALKAN DE-202, Separol, Demin-8411, and Dissolvan-3359 — were first evaluated to establish a reliable performance baseline. All demulsification experiments were carried out at 50 °C with a settling time of 2 hours using the standard bottle-test method, reflecting moderate thermal conditions relevant to energy-efficient field operation. To further improve separation efficiency while avoiding excessive thermal input, demulsifier-based composite formulations were developed under laboratory conditions. These systems combined the selected demulsifiers with ethanol as a polar co-agent, introduced to enhance interfacial tension reduction and promote faster droplet coalescence. Through experimental optimization, the most effective performance of the composite systems was achieved at a dosage of 500 g/t. Accordingly, both individual reagents and composite formulations were comparatively evaluated over a concentration range of 150–500 g/t, with the results presented in graphical and tabulated form. Since all formulations were based on demulsifying agents, they were conventionally designated as demulsifier compositions (DC), and a total of ten systems (DC-1 to DC-10) were synthesized and tested. In addition to dehydration performance, the influence of both individual reagents and composite systems on surface tension, interfacial tension, viscosity, hydrophilic-lipophilic balance (HLB), and salt removal efficiency was investigated. This integrated analysis allowed the relationship between interfacial modification, flow behavior, and separation efficiency to be clearly established. The experimental results demonstrate that composite formulations provide a distinct advantage over single-component demulsifiers, enabling effective dehydration under moderate thermal conditions and supporting energy- and resource-saving crude oil treatment strategies. Among the investigated systems, the DC-5 formulation exhibited the highest overall demulsification efficiency, confirming the importance of optimized component synergy for reducing chemical consumption, processing time, and energy demand. Bibl. 33, Tab. 3, Fig. 6.

  • Open Access

    Synthesis, structural characterization and corrosion inhibition performance of propargyl- and allyl-containing aryloxy alcohol derivatives in H₂S medium

    by Rufat Azizov, Guseyn Gurbanov, Aysel Gasimzade, Ali Rahimli, Ramin Eyvazli

    Two novel aryloxy alcohol derivatives, one containing a terminal C≡C bond (RH-1) and an allyl ether containing a C=C bond (RH-2), were synthesized and evaluated as corrosion inhibitors for St-3 carbon steel in a hydrogen sulphide (H₂S)-containing medium. Their molecular structures were characterized by Fourier-transform infrared (FTIR) spectro­scopy and nuclear magnetic resonance - ¹H NMR and ¹³C NMR. Corrosion inhibition performance was investigated using gravimetric measurements, electrochemical impe­dance spectroscopy (EIS), potentiodynamic polarization, surface characterization and density functional theory (DFT) calculations. Gravimetric experiments were conducted over the temperature range of 25 to 50 °C using inhibitor concentrations of 10 to 30 ppm. Both compounds effectively reduced the corrosion rate, with inhibition efficiency increasing with inhibitor concentration. At 25 °C and 30 ppm, EIS showed maximum inhibition efficiencies of 97.0 % for RH-1 and 94.0 % for RH-2. EIS measurements showed a substantial increase in charge-transfer resistance and a decrease in double-layer capacitance, consistent with progressive inhibitor adsorption and formation of a protective interfacial layer. Surface analyses further supported the formation of protective inhibitor-containing films on the steel surface. DFT calculations indicated greater electron-donating ability and a stronger adsorption tendency for RH-1, consistent with its superior experimental inhibition performance. The higher efficiency of RH-1 was associated with its propargyl (C≡C) functionality, which promotes stronger interaction with the steel surface than the allyl (C=C) functionality of RH-2. The combined experimental and theoretical results demonstrate that these aryloxy alcohol derivatives provide effective corrosion inhibition of carbon steel in H₂S-containing environments.

  • Open Access

    Integrated Approaches to Rheological Modeling of Industrial Oil Blends: Bridging Experimental Measurement, Artificial Intelligence, and Predictive Digital Simulation — A Systematic Review

    by Jamshidbek Shamuratov, Aysel Gasimzade

    The rheological characterization and prediction of industrial oil blends — mineral and synthetic lubricants, bio-based oils, biodiesel mixtures, nano-enhanced oils, and waxy or heavy crude systems — underpins the reliable design of lubrication regimes, the assurance of pipeline flow, and the optimization of energy-intensive thermal processes. Historically, three research communities have addressed these problems in relative isolation: experimental rheometrists who measure flow curves, yield stresses, and thixotropic responses; data scientists who train machine-learning (ML) surrogates to predict viscosity from composition and operating conditions; and computational engineers who simulate non-Newtonian transport using computational fluid dynamics (CFD), molecular dynamics (MD), and, more recently, digital twins. This systematic review synthesizes 63 studies published between 2020 and 2025 and argues that the frontier of the field lies not in any single pillar but in their disciplined integration. Following a PRISMA-inspired protocol, we map the methodological landscape, compare the reported predictive accuracy of representative ML architectures — artificial neural networks (ANN), Gaussian process regression (GPR), adaptive neuro-fuzzy inference systems (ANFIS), ensemble methods, and physics-informed neural networks (PINN/RhINN) — and examine how simulation and digital-twin frameworks consume rheological data. Across the corpus, data-driven models routinely reach coefficients of determination above 0.98 and absolute relative errors below 5%, yet they remain limited by data scarcity, weak extrapolation, and poor interpretability. We propose a unified, feedback-coupled architecture in which experiment, learning, and simulation reinforce one another, and we identify standardization of data, uncertainty quantification, and physics-informed hybridization as the decisive challenges for the next research cycle.

  • Open Access

    ENERGY-EFFICIENT APPROACHES TO IMPROVE FLOWABILITY OF HIGH-WAX CRUDE OILS USING COMPOSITE ADDITIVES

    by A.V. Gasimzade

    The aim of this study is to develop an energy-efficient chemical approach to improve the flowability of high-paraffin crude oil. Initially, the effectiveness of individual reagents was evaluated. Difron-3970, a depressor additive, was tested at a concentration of 750 g/t, and BAF-1, a nanostructured agent, at 300 g/t. Although both reagents individually reduced the pour point and improved rheological parameters, the most significant effect was observed when used in combination. To this end, a composite formulation (A-1) was developed by blending Difron-3970 and BAF-1 in a 3 : 1 ratio with the addition of 50 g/t oleyl alcohol. The optimal total concentration of the A-1 composition was determined to be 550 g/t, ensuring maximum technological efficiency with minimal reagent consumption. At the initial stage, the physicochemical characteristics of the crude oil sample (density, viscosity, resin-paraffin content, pour point, etc.) were determined. The kinetics of paraffin deposition were analyzed using the “cold finger” method. The application of the A-1 composition significantly reduced both the sediment amount and the pour point of the oil. Rheological analyses were performed under both low and high temperature regimes, and the flow curves of the crude oil were constructed. Based on the Bingham-Herschel model, parameters such as yield stress, consistency index, and non-Newtonian flow index were determined. The application of the composite additive resulted in a substantial reduction of these parameters, thereby lowering the energy requirements during transportation. The findings demonstrate that the use of complex chemical systems containing surfactants and nanocomponents not only improves the technological properties of high-paraffin crude oil but also provides an energy- and resource-efficient treatment strategy. Bibl. 25, Tab. 6, Fig. 9.


  • Open Access

    ОСОБЛИВОСТІ ДЕЕМУЛЬГАЦІЇ НАФТОВИХ ЕМУЛЬСІЙ У ПРИСУТНОСТІ БАГАТОКОМПОНЕНТНИХ ДЕМУЛЬГАТОРІВ

    by Айсель В. Гасімзаде, Рашад Р. Халілзаде

    У цьому дослідженні був вивчений процес деемульгації водонафтових емульсій сирої нафти родовища Мурадханли з вмістом води 35 % із використанням як індивідуальних реагентів, так і їхніх композицій. До індивідуальних реагентів належали ALKAN-318, ALKAN DE-202, Separol, Demin-8411 та Dissolvan-3359. Деемульгаційні експерименти проводили за температур 40 °C і 50 °C протягом 2 год із застосуванням методу пляшкових випробувань (bottle test). З метою підвищення ефективності деемульгації в лабораторних умовах були розроблені композиційні формуляції на основі деемульгаторів. Ці композиції складалися з досліджуваних деемульгаторів у поєднанні з етанолом, який додавався для зниження міжфазного натягу. Оптимальне дозування композицій було визначено на рівні 500 г/т; відповідно, як індивідуальні реагенти, так і композиції порівнювали в діапазоні концентрацій 150–500 г/т, а отримані результати були подані в вигляді графіків і таблиць. Оскільки формуляції базувалися на деемульгаторах, їх умовно позначали як деемульгаторні композиції (DC), і загалом було синтезовано десять композицій (DC-1 – DC-10). Одночасно із дослідженням деемульгації водонафтових емульсій сирої нафти Мурадханли з вмістом води 35 % також був вивчений вплив як індивідуальних реагентів, так і композиційних систем на поверхневий натяг, міжфазний натяг, в’язкість, індекс HLB та вміст солей, а отримані результати були проаналізовані в порівняльному аспекті. Експериментальні дані показали, що найвища ефективність деемульгації була досягнута для композиції DC-5.


  • Synergistic Composite Additives for Rheological Optimization of High-paraffin Crude Oil

    by Aysel Gasimzade, Vali Nurullayev

    This study investigates the rheological behavior and wax-deposition tendency of a model high-paraffin crude oil prepared by blending samples from the Palchig–Pilpilasi field. The oil is characterized by a density of 901.0 kg/m3, resin content of 4.3 wt%, asphaltenes of 0.18 wt%, and paraffins of 15.2 wt%, forming a stable paraffin–resin–asphaltene system suitable for laboratory evaluation.The performance of individual depressor additives, Difron-3971 and HY-154, was first assessed and resulted in a moderate viscosity reduction of 15–25% at low temperatures while preserving non-Newtonian behavior. To enhance treatment efficiency, a composite formulation was developed and tested at a dosage of 600 g/t. Rheological measurements showed that the composite reduced the viscosity by 3.5–4.0 times and decreased the yield stress from 0.1625 Pa to 0.0325 Pa, indicating a pronounced weakening of the internal structure and a transition toward near-Newtonian flow.Cold-finger experiments confirmed a strong suppression of wax deposition, with inhibition efficiency reaching approximately 95% at low temperatures. The results highlight the synergistic effect of the composite formulation and its potential as an effective flow-assurance solution for high-paraffin crude oils.

  • Open Access

    Chemical technology aspects of non-equilibrium microwave heating for phase separation in multiphase liquid systems

    by Aysel Gasimzade, Vali Nurullayev, Rashad Khalilzade

    Microwave-assisted demulsification is a promising method for separating water-in-oil emulsions because it provides rapid and volumetric energy transfer. However, the mechanism of separation under non-equilibrium heating conditions remains insufficiently understood. In this study, the kinetic factors governing microwave-assisted phase separation were investigated at microwave powers of 200-800 W and water fractions of 0.12-0.45. Temperature evolution, heating rate (dT/dt), separated water volume, and specific energy consumption were analysed. The results showed a pronounced non-monotonic dependence of separation efficiency on microwave power. The highest separation efficiency was observed at intermediate powers of 400-600 W, while further power increases reduced performance despite continued temperature rise. The findings demonstrate that heating rate, rather than final temperature, is the main controlling parameter, providing a basis for more energy-efficient microwave demulsification.

  • Open Access

    ДОСЛІДЖЕННЯ ВПЛИВУ НОВОГО КОМПОЗИЦІЙНОГО РЕАГЕНТУ НА ДЕЕМУЛЬГАЦІЮ МУРАДХАНЛІВСЬКОЇ НАФТИ ТА МАТЕМАТИЧНЕ МОДЕЛЮВАННЯ РЕЗУЛЬТАТІВ

    by Гусейн Р. Гурбанов, Айсель В. Гасімзаде, Зівар І. Фарзалізаде, Aysel V. Gasimzade, Zivar I. Farzalizade

    This article presents a comprehensive study on the demulsification of highly stable emulsified oil from the Muradkhanli field, a major heavy oil-producing site in Azerbaijan. Both physical (temperature effect) and physicochemical methods were evaluated. ND-12 (Azerbaijan) and Dissolvan-4411 (Germany) demulsifiers, along with two newly developed reagent compositions (A-1 and A-2), were tested. Experiments were conducted using the bottle test method, and separated, residual, and ballast water contents were quantified. While certain emulsified oils can release significant water at 50–60 °C without demulsifiers, Muradkhanli oil forms exceptionally stable emulsions that require advanced treatments. The A-series compositions significantly enhanced demulsification efficiency, accelerating phase separation even at moderate temperatures. In particular, the A-1 composition achieved superior performance, reducing residual water content to 0.06 % and ballast water to 0.09 % at 600 g/t and 60 °C. Furthermore, a mathematical model was developed for A-1 to assess its dependence on temperature, reagent dosage, and time, with polynomial curves and 3D response surfaces confirming strong agreement with experimental data. Overall, these results demonstrate the promising potential of advanced reagent compositions to overcome the challenges associated with stable water-oil emulsions in heavy resinous crude oils. This approach offers practical insights for optimizing field separation processes and improving operational efficiency in global heavy oil production.


  • Open Access

    ENERGY SAVINGS THROUGH THE APPLICATION OF EFFICIENT COMPOSITIONS IN THE PREPARATION OF HEAVY OILS FOR TRANSPORTATION

    by G.R. Gurbanov, A.V. Gasimzade, Z.A. Abdullayeva

    The preparation of high-viscosity crude oils, which contain high-molecular-weight compounds and exhibit complex anomalous rheological properties, for transportation under field conditions remains a pressing issue. Efficient dehydration and desalting of such oils are critical because their preparation for transportation typically requires high temperatures. Although high temperatures facilitate the separation of water from oil, they also lead to the evaporation and loss of light hydrocarbons, which readily transition into vapor. Consequently, this results in both hydrocarbon losses and the release of light gaseous compounds into the atmosphere, contributing to environmental pollution and an increase in carbon emissions. Therefore, the selection of an appropriate reagent for the preparation of anomalous crude oils for transportation is of utmost importance. The addition of highly effective demulsifiers at optimal concentrations can facilitate the demulsification process at lower temperatures. This approach not only reduces the consumption of reagents and energy but also saves time and extends the operational lifespan of processing equipment. Thus, the application of an effective demulsifier minimizes raw material and energy consumption while simultaneously mitigating environmental impact. Moreover, the use of a demulsifier with strong demulsification properties simplifies the complex transportation preparation technology, ensuring that the crude oil maintains a high-quality composition. In this context, the present study analyzes the results of laboratory experiments conducted to evaluate the application of new compositions with high surface activity for the breakdown of emulsions with the aforementioned properties. For the research process, crude oil samples were collected from the Absheron, Sangachal, and Dashgil fields with water content levels of 35 %, 30 %, and 32 %, respectively. Four new compositions, designated as AZ-1, AZ-2, AZ-3, and AZ-4, were synthesized using various molar ratios of different demulsifying agents with similar functional purposes. A comprehensive analysis of numerous experimental results has demonstrated that the new compositions exhibit significantly higher efficiency compared to their individual components. The effectiveness of the compositions in the demulsification process of crude oil samples with anomalous properties was calculated based on the obtained results. It was determined that at an optimal concentration and a temperature of 50 °C, the efficiency of the AZ-1, AZ-2, AZ-3, and AZ-4 compositions for the Absheron, Sangachal, and Dashgil crude oil samples was 97.2 %, 98.0 %, and 97.5 %; 98.8 %, 99.2 %, and 99.0 %; 98.5 %, 99.0 %, and 98.7 %; 99.8 %, 99.9 %, and 99.8 %, respectively. Bibl. 25, Tab. 3, Fig. 4.


  • Open Access

    STUDY OF THE EFFECT OF PHYSİCO-CHEMİCAL PROPERTİES ON THE RHEOLOGİCAL PROPERTİES OF HİGH-PARAFFİN OİLS

    by G.R. Gurbanov, A.V. Gasimzade, L.A. Abbasova

    For the first time, the joint effect of magnetic field, Difron-4201 depressor additive, new composition with conventional name N-1 and N-1 + magnetic field on paraffin deposition and freezing temperature in high-paraffin oil was studied. Laboratory experiments on paraffin deposition were performed by the “cold tube” method and the surface temperature of the tube was 5, 10, 15, 20, and 25 °C. The greatest decrease in the amount of paraffin deposits at different temperatures was caused by the influence of the combined method. The physical, chemical and physico-chemical effect on the freezing temperature of high-paraffin oil was carried out according to a known standard method. At this time, 600 g/t of Difron-4201 depressant additive and 500 g/t of N-1 composition were considered as the optimal usage rate. As in paraffin precipitation, the most effective influence on freezing temperature was with the presence of N-1 + magnetic field composition. It was also determined that the effect of magnetic field, Difron-4201 depressor additive, new composition with conventional name N-1 and N-1 + magnetic field on the effective viscosity of high-paraffin oil was obtained by the combined method. In order to study the bactericidal property, the effect of the new composition N-1 on the development of sulfate-reducing bacteria was also studied in laboratory conditions in Postgate-B nutrient medium for fifteen days, and its bactericidal effect was calculated. It was found that composition N-1 shows the highest bactericidal effect at a concentration of 500 g/t, and at this time the value of S is 97 %. Thus, it is possible to carry out pipeline transportation of highly paraffinic oils in cold climates without heating by using electricity at intermediate stations. This, in turn, provides energy savings. On the other hand, environmental protection is ensured by reducing the corrosion rate to a minimum, increasing the service life of pipelines and eliminating possible hydrocarbon losses. The possibility of reducing paraffin deposits by using the developed combined method can be applied when application fuel oil in heat and power generation. Bibl. 25, Fig. 3, Tab. 5.