John Fredy Ríos-Rojas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
John Fredy Ríos-Rojas has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Heidis Cano
Department of Civil and Environmental, Universidad de la Costa, Barranquilla 080002, Colombia
3 shared publications - Esneyder Puello-Polo
Grupo de Investigación en Oxi/Hidrotratamiento Catalítico y Nuevos Materiales, Programa de Química-Ciencias Básicas, Universidad del Atlántico, Puerto Colombia 081007, Colombia
2 shared publications - Joaquin Hernández Fernández
Chemical Engineering Program, School of Engineering, Universidad Tecnológica de Bolívar, Parque Industrial y Tecnológico Carlos Vélez Pombo km 1 Vía, Turbaco 130001, Bolívar, Colombia
2 shared publications - Yoleima Guerra
Centro de Investigación en Ciencias e Ingeniería, CECOPAT&A, Cartagena 131001, Colombia
2 shared publications - Carlos Arroyave
Universidad Antonio Narino
1 shared publication - David Aperador Rodriguez
Universidad Antonio Narino
1 shared publication
Latest Publications
- Open Access
Effect of Addition of Polyurea as an Aggregate in Mortars: Analysis of Microstructure and Strength
The addition of polymers in construction is a new tendency and an important step toward the production of structures with better functional properties. This work investigates the addition of polyurea (PU) as a polymeric material in mortars. Polymer mortars were manufactured with the addition of polyurea retained in different sieves (T50 and T100) and different concentrations (2% and 5%). The characterization of the, polyurea (PU)control mortar (PU0%) and manufactured polyurea mortars (PU2%T50, PU5%T50, PU2%T100, and PU5%T100) was conducted by means of morphological analysis, SEM, XRF, TGA, and a compressive strength test of hydraulic mortars. The results show that mortars with polyurea retained in sieve 100 with a particle size of 150 μm exhibit better thermal behavior and a greater resistance to compression with a concentration of 5% polyurea with respect to the other samples. The present work reveals that polyurea retained in sieve 100 can be considered as a polymeric additive for mortars, indicating that it could be a candidate for applications such as construction.
Open AccessEffect of Addition of Polyurea as an Aggregate in Mortars: Analysis of Microstructure and Strength
The addition of polymers in construction is a new tendency and an important step toward the production of structures with better functional properties. This work investigates the addition of polyurea (PU) as a polymeric material in mortars. Polymer mortars were manufactured with the addition of polyurea retained in different sieves (T50 and T100) and different concentrations (2% and 5%). The characterization of the, polyurea (PU)control mortar (PU0%) and manufactured polyurea mortars (PU2%T50, PU5%T50, PU2%T100, and PU5%T100) was conducted by means of morphological analysis, SEM, XRF, TGA, and a compressive strength test of hydraulic mortars. The results show that mortars with polyurea retained in sieve 100 with a particle size of 150 μm exhibit better thermal behavior and a greater resistance to compression with a concentration of 5% polyurea with respect to the other samples. The present work reveals that polyurea retained in sieve 100 can be considered as a polymeric additive for mortars, indicating that it could be a candidate for applications such as construction.
- Open Access
- 20 April 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 4920
Identification and Quantification of Microplastics in Effluents of Wastewater Treatment Plant by Differential Scanning Calorimetry (DSC)
In this research, the presence of microplastics was detected through a differential scanning calorimetry (DSC) analysis of three wastewater treatment plants. One of these plants applied only a preliminary treatment stage while the others applied up to a secondary treatment stage to evaluate their effectiveness. The results showed the presence of polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyethylene terephthalate (PET), which were classified as fragments, fibers or granules. During the evaluation of the plants, it was determined that the preliminary treatment did not remove more than 58% of the microplastics, while the plants applying up to a secondary treatment with activated sludge achieved microplastic removal effectiveness between 90% and 96.9%.
- 20 April 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 4920
Open AccessIdentification and Quantification of Microplastics in Effluents of Wastewater Treatment Plant by Differential Scanning Calorimetry (DSC)
In this research, the presence of microplastics was detected through a differential scanning calorimetry (DSC) analysis of three wastewater treatment plants. One of these plants applied only a preliminary treatment stage while the others applied up to a secondary treatment stage to evaluate their effectiveness. The results showed the presence of polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyethylene terephthalate (PET), which were classified as fragments, fibers or granules. During the evaluation of the plants, it was determined that the preliminary treatment did not remove more than 58% of the microplastics, while the plants applying up to a secondary treatment with activated sludge achieved microplastic removal effectiveness between 90% and 96.9%.
- Open Access
- 24 December 2021
- Published by MDPI AG in Sustainability
- Vol. 14 (1) , 189
Impact of Environmental Pollution in the Sustainability of Architectural Heritage: Case Study from Cartagena of India, Colombia
Limited studies have been carried out in emerging nations on the correlation among the environmental pollution, economic factors, and architectural heritage. For this reason, this research presents an assessment of environmental parameter values on materials deterioration used in architectural heritage in Cartagena de Indias; furthermore, it depicts the effect of heritage degradation on socioeconomic aspects of people whose livelihood depends on trade, tourism, and service activities. Dose-response functions were used for estimating of deterioration of carbon steel, copper, and zinc caused by relative humidity (RH), temperature (T), sulphur dioxide deposition (DSO2), and chloride deposition (DCl−). In addition, socioeconomic impact on architectural heritage was studied using a Socioeconomic Impact Survey (SEIS), with the sample of 174 individuals who work in areas of great architectural value in the city. The results show a corrosion rate (Vcorr) in the range of 80 < Vcorr < 200, 2.8 < Vcorr < 5.6 and 4.2 < Vcorr < 8.4 μm/year for carbon steel, copper, and zinc, respectively, due to the high level of pollutants. The high deterioration jointly with the lack of citizen culture affect the architectural heritage monuments causing a negative impact in several economic aspects. The establishment of public programs is essential for the conservation of the heritage monuments of the city.
- 24 December 2021
- Published by MDPI AG in Sustainability
- Vol. 14 (1) , 189
Open AccessImpact of Environmental Pollution in the Sustainability of Architectural Heritage: Case Study from Cartagena of India, Colombia
Limited studies have been carried out in emerging nations on the correlation among the environmental pollution, economic factors, and architectural heritage. For this reason, this research presents an assessment of environmental parameter values on materials deterioration used in architectural heritage in Cartagena de Indias; furthermore, it depicts the effect of heritage degradation on socioeconomic aspects of people whose livelihood depends on trade, tourism, and service activities. Dose-response functions were used for estimating of deterioration of carbon steel, copper, and zinc caused by relative humidity (RH), temperature (T), sulphur dioxide deposition (DSO2), and chloride deposition (DCl−). In addition, socioeconomic impact on architectural heritage was studied using a Socioeconomic Impact Survey (SEIS), with the sample of 174 individuals who work in areas of great architectural value in the city. The results show a corrosion rate (Vcorr) in the range of 80 < Vcorr < 200, 2.8 < Vcorr < 5.6 and 4.2 < Vcorr < 8.4 μm/year for carbon steel, copper, and zinc, respectively, due to the high level of pollutants. The high deterioration jointly with the lack of citizen culture affect the architectural heritage monuments causing a negative impact in several economic aspects. The establishment of public programs is essential for the conservation of the heritage monuments of the city.
- Open Access
- 1 January 2017
- Published by Universidad Nacional Autonoma de Mexico in Atmósfera
- Vol. 30 (1) , 53-61
Annual atmospheric corrosion rate and dose-response function for carbon steel in Bogotá
Annual atmospheric corrosion rate and dose-response function for carbon steel in Bogotá
- 1 January 2017
- Published by Universidad Nacional Autonoma de Mexico in Atmósfera
- Vol. 30 (1) , 53-61
Open AccessAnnual atmospheric corrosion rate and dose-response function for carbon steel in Bogotá
Annual atmospheric corrosion rate and dose-response function for carbon steel in Bogotá