Chong-Biao Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chong-Biao Tian has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Julian Schulze
Ruhr University Bochum
5 shared publications - Li Wang
Ruhr University Bochum
4 shared publications - Máté Vass
Chair of Applied Electrodynamics and Plasma Technology, Ruhr-University Bochum, 44780 Bochum, Germany
4 shared publications - Wan Dong
Key Laboratory of Materials Modification by Laser, Ion, and Electron Beams (Ministry of Education), School of Physics, Dalian University of Technology, Dalian 116024, People’s Republic of China
4 shared publications - Yuan-Hong Song
Dalian University of Technology
4 shared publications - Xiao-Kun Wang
Ruhr-University Bochum
3 shared publications
Latest Publications
- 2 June 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (6)
Temporal mode transitions in attachment induced instabilities of electronegative capacitively coupled radio frequency discharges
In capacitively coupled radio frequency plasmas sustained in electronegative gases, ionization-attachment feedback can induce periodic discharge instabilities. Based on particle-in-cell simulations of oxygen plasmas combined with a diffusion model, we demonstrate that such instabilities are accompanied by self-induced temporal mode transitions of the electron power absorption mode between the α-, Detachment Induced/γ-, and Drift-Ambipolar-modes. While the radio frequency period averaged ion energy and ion flux at the electrodes are insensitive to the instability and increase monotonically with increasing driving voltage, the atomic oxygen production is found to be sensitive to such periodic temporal mode transitions, with its production rate exhibiting a pronounced non-monotonic dependence on the driving voltage. These phenomena are explained by the effects of such temporal mode transitions on the spatio-temporal electric field structure and electron kinetics.
- 2 June 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (6)
Temporal mode transitions in attachment induced instabilities of electronegative capacitively coupled radio frequency discharges
In capacitively coupled radio frequency plasmas sustained in electronegative gases, ionization-attachment feedback can induce periodic discharge instabilities. Based on particle-in-cell simulations of oxygen plasmas combined with a diffusion model, we demonstrate that such instabilities are accompanied by self-induced temporal mode transitions of the electron power absorption mode between the α-, Detachment Induced/γ-, and Drift-Ambipolar-modes. While the radio frequency period averaged ion energy and ion flux at the electrodes are insensitive to the instability and increase monotonically with increasing driving voltage, the atomic oxygen production is found to be sensitive to such periodic temporal mode transitions, with its production rate exhibiting a pronounced non-monotonic dependence on the driving voltage. These phenomena are explained by the effects of such temporal mode transitions on the spatio-temporal electric field structure and electron kinetics.
- 1 September 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (9) , 095011
Simulation study of mode transitions induced by external control parameters in capacitively coupled oxygen discharges
In capacitively coupled radio frequency discharges, plasma parameters such as the densities of reactive radicals, ions, and electrons are strongly affected by the spatio-temporally resolved electron power absorption dynamics and the electron energy distribution function. These, in turn, are determined by the electron power absorption mode of the discharge. In oxygen gas, various modes of operation, e.g. the α-, drift-ambipolar (DA), and γ-mode, as well as mode transitions among them induced by external control parameters such as driving voltage and pressure are known. In 2012, Dittmann et al (Dittmann et al 2012 Plasma Phys. Control. Fusion 54 124038) discovered another electron power absorption mode, where electrons are generated via detachment from O − ions inside the sheaths, accelerated towards the bulk by the sheath electric field and collisionally multiplied, similar to secondary electrons. This new electron heating mode was called detachment-induced (DI) mode in a later computational study (Tian et al 2024 Plasma Sources Sci. Technol. 33 075008). In this work, kinetic plasma simulations are performed to investigate the effects of pressure, voltage, and secondary electron emission coefficients of the electrodes on mode transitions into and out of the DI-mode. Increasing the pressure is found to induce transitions from the DA- to the α-, and subsequently to the γ- and DI-mode. Increasing the driving voltage amplitude leads to transitions from the DA- to the DI- and finally to the γ-mode. Higher secondary electron emission coefficients suppress the DI-mode. These mode transitions are explained at the kinetic level and found to affect the ion flux to the electrodes and the atomic oxygen generation in the plasma volume.
- 1 September 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (9) , 095011
Simulation study of mode transitions induced by external control parameters in capacitively coupled oxygen discharges
In capacitively coupled radio frequency discharges, plasma parameters such as the densities of reactive radicals, ions, and electrons are strongly affected by the spatio-temporally resolved electron power absorption dynamics and the electron energy distribution function. These, in turn, are determined by the electron power absorption mode of the discharge. In oxygen gas, various modes of operation, e.g. the α-, drift-ambipolar (DA), and γ-mode, as well as mode transitions among them induced by external control parameters such as driving voltage and pressure are known. In 2012, Dittmann et al (Dittmann et al 2012 Plasma Phys. Control. Fusion 54 124038) discovered another electron power absorption mode, where electrons are generated via detachment from O − ions inside the sheaths, accelerated towards the bulk by the sheath electric field and collisionally multiplied, similar to secondary electrons. This new electron heating mode was called detachment-induced (DI) mode in a later computational study (Tian et al 2024 Plasma Sources Sci. Technol. 33 075008). In this work, kinetic plasma simulations are performed to investigate the effects of pressure, voltage, and secondary electron emission coefficients of the electrodes on mode transitions into and out of the DI-mode. Increasing the pressure is found to induce transitions from the DA- to the α-, and subsequently to the γ- and DI-mode. Increasing the driving voltage amplitude leads to transitions from the DA- to the DI- and finally to the γ-mode. Higher secondary electron emission coefficients suppress the DI-mode. These mode transitions are explained at the kinetic level and found to affect the ion flux to the electrodes and the atomic oxygen generation in the plasma volume.
- Open Access
- 1 April 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (4) , 045017
Experimental and numerical study of the ionization-attachment instability in an O2 capacitively coupled radio frequency plasma
This study examines the emergence of an ionization-attachment plasma instability in a geometrically symmetric capacitively coupled plasma reactor with stainless steel electrodes operated in oxygen. Periodic fluctuations in optical emission intensity were observed under varying conditions of pressure and voltage. To interpret the experimental data, a kinetic (PIC/MCC) simulation approach was employed, with a particular focus on the influence of external parameters, including the voltage amplitude and the O 2 + ion induced secondary electron emission coefficient (SEEC, γ). By varying the γ coefficient at fixed pressure and voltage amplitude, the aim was to achieve the best possible agreement between the measured and computed oscillation frequencies. The experimentally observed oscillation frequency of f in = 0.25 kHz at φ 0 = 655 V voltage amplitude (with 13.56 MHz RF excitation) was reproduced in the simulation with γ = 0.0042 at φ 0 = 600 V. The results highlight the critical role of these parameters in the onset and characteristics of plasma instability and correspond to a computationally assisted diagnostic to determine ion induced secondary electron emission coefficients.
- 1 April 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (4) , 045017
Open AccessExperimental and numerical study of the ionization-attachment instability in an O2 capacitively coupled radio frequency plasma
This study examines the emergence of an ionization-attachment plasma instability in a geometrically symmetric capacitively coupled plasma reactor with stainless steel electrodes operated in oxygen. Periodic fluctuations in optical emission intensity were observed under varying conditions of pressure and voltage. To interpret the experimental data, a kinetic (PIC/MCC) simulation approach was employed, with a particular focus on the influence of external parameters, including the voltage amplitude and the O 2 + ion induced secondary electron emission coefficient (SEEC, γ). By varying the γ coefficient at fixed pressure and voltage amplitude, the aim was to achieve the best possible agreement between the measured and computed oscillation frequencies. The experimentally observed oscillation frequency of f in = 0.25 kHz at φ 0 = 655 V voltage amplitude (with 13.56 MHz RF excitation) was reproduced in the simulation with γ = 0.0042 at φ 0 = 600 V. The results highlight the critical role of these parameters in the onset and characteristics of plasma instability and correspond to a computationally assisted diagnostic to determine ion induced secondary electron emission coefficients.
- 1 February 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (2) , 025008
Electron dynamics and particle transport in capacitively coupled Ar/O2 discharges driven by sawtooth up voltage waveforms
One dimensional fluid/electron Monte Carlo simulations of capacitively coupled Ar/O2 discharges driven by sawtooth up voltage waveforms are performed as a function of the number of consecutive harmonics driving frequencies of 13.56 MHz, N (1–3), pressure (200–500 mTorr) and gas mixture (10%–90% admixture of O2 to Ar). The effects of these external parameters on the electron dynamics, and the transport of ions and neutrals are revealed at constant peak-to-peak driving voltage. The electronegativity is found to decline as the number of consecutive harmonics increases and the DC self-bias voltage decreases. Increasing the pressure also leads to a decrease in electronegativity. The combination of a decrease in the mean free path of electrons and the presence of the electrical asymmetry effect result in different spatio-temporal distributions of the ionization rate, which lead to a reduction in the amplitude of the DC self-bias at higher pressure. As the admixture of electronegative O2 increases, the electronegativity is enhanced, and the discharge mode changes from an α—drift ambipolar (DA) hybrid to DA mode. This work focuses on linking these fundamental changes of the plasma physics induced by changing external parameters to process relevant charged particle and neutral fluxes to the electrodes. Particular attention is paid to O(1D) flux, because it is a precursor of deposition. In discharges driven by sawtooth up voltage waveforms, placing the substrate on the grounded electrode and increasing the number of consecutive harmonics, N, can facilitate the deposition process, since the O(1D) flux to the substrate is higher in these scenarios. Moreover, at an O2 admixture of 20%, the O(1D) flux is nearly as high as that at an O2 admixture of 90%, indicating that a higher O(1D) flux can be achieved without excessively increasing the O2 admixture.
- 1 February 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (2) , 025008
Electron dynamics and particle transport in capacitively coupled Ar/O2 discharges driven by sawtooth up voltage waveforms
One dimensional fluid/electron Monte Carlo simulations of capacitively coupled Ar/O2 discharges driven by sawtooth up voltage waveforms are performed as a function of the number of consecutive harmonics driving frequencies of 13.56 MHz, N (1–3), pressure (200–500 mTorr) and gas mixture (10%–90% admixture of O2 to Ar). The effects of these external parameters on the electron dynamics, and the transport of ions and neutrals are revealed at constant peak-to-peak driving voltage. The electronegativity is found to decline as the number of consecutive harmonics increases and the DC self-bias voltage decreases. Increasing the pressure also leads to a decrease in electronegativity. The combination of a decrease in the mean free path of electrons and the presence of the electrical asymmetry effect result in different spatio-temporal distributions of the ionization rate, which lead to a reduction in the amplitude of the DC self-bias at higher pressure. As the admixture of electronegative O2 increases, the electronegativity is enhanced, and the discharge mode changes from an α—drift ambipolar (DA) hybrid to DA mode. This work focuses on linking these fundamental changes of the plasma physics induced by changing external parameters to process relevant charged particle and neutral fluxes to the electrodes. Particular attention is paid to O(1D) flux, because it is a precursor of deposition. In discharges driven by sawtooth up voltage waveforms, placing the substrate on the grounded electrode and increasing the number of consecutive harmonics, N, can facilitate the deposition process, since the O(1D) flux to the substrate is higher in these scenarios. Moreover, at an O2 admixture of 20%, the O(1D) flux is nearly as high as that at an O2 admixture of 90%, indicating that a higher O(1D) flux can be achieved without excessively increasing the O2 admixture.
- 1 July 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (7) , 075008
The detachment-induced mode in electronegative capacitively coupled radio-frequency plasmas
Insights into the spatio-temporally resolved electron power absorption dynamics in capacitively coupled radio-frequency plasmas are essential for understanding the fundamentals of their operation and as a basis for knowledge-based plasma process development. Similar to the γ-mode, an ionization maximum is observed at the sheath edge around the time of maximum sheath voltage in electronegative oxygen discharges at a pressure of 300 Pa. Based on Particle-in-Cell/Monte Carlo Collisions (PIC/MCC) simulations, we demonstrate that this maximum is not only caused by secondary electrons emitted at the electrode and collisionally multiplied inside the sheath. In fact, it also occurs in the complete absence of secondary electrons in the simulation, and is caused by the generation of O − ions by electron attachment close to the electrode during the local sheath collapse. These negative ions are accelerated towards the plasma bulk by the sheath electric field during sheath expansion. By electron detachment from these negative ions, electrons are generated inside the sheath and are accelerated towards the plasma bulk by the instantaneous sheath electric field—similarly to secondary electrons. Ionization is also observed in the plasma bulk and caused by electrons generated by detachment and accelerated by the high drift-and ambipolar electric fields. This detachment-induced electron power absorption is found to have significant effects on the discharge in the presence and absence of secondary electron emission. Its fundamentals are understood based on an analysis of the spatio-temporal electron and O − power absorption dynamics as well as the trajectory of selected O − ions close to the electrode.
- 1 July 2024
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 33 (7) , 075008
The detachment-induced mode in electronegative capacitively coupled radio-frequency plasmas
Insights into the spatio-temporally resolved electron power absorption dynamics in capacitively coupled radio-frequency plasmas are essential for understanding the fundamentals of their operation and as a basis for knowledge-based plasma process development. Similar to the γ-mode, an ionization maximum is observed at the sheath edge around the time of maximum sheath voltage in electronegative oxygen discharges at a pressure of 300 Pa. Based on Particle-in-Cell/Monte Carlo Collisions (PIC/MCC) simulations, we demonstrate that this maximum is not only caused by secondary electrons emitted at the electrode and collisionally multiplied inside the sheath. In fact, it also occurs in the complete absence of secondary electrons in the simulation, and is caused by the generation of O − ions by electron attachment close to the electrode during the local sheath collapse. These negative ions are accelerated towards the plasma bulk by the sheath electric field during sheath expansion. By electron detachment from these negative ions, electrons are generated inside the sheath and are accelerated towards the plasma bulk by the instantaneous sheath electric field—similarly to secondary electrons. Ionization is also observed in the plasma bulk and caused by electrons generated by detachment and accelerated by the high drift-and ambipolar electric fields. This detachment-induced electron power absorption is found to have significant effects on the discharge in the presence and absence of secondary electron emission. Its fundamentals are understood based on an analysis of the spatio-temporal electron and O − power absorption dynamics as well as the trajectory of selected O − ions close to the electrode.