Kairat Tazhu
Research Subjects
Kairat Tazhu has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Dildara Tugelbayeva
The Institute of Combustion Problems, Almaty 050000, Kazakhstan
4 shared publications - Nurzhamal Zhylybayeva
Institute of Combustion Problems, Almaty 050012, Kazakhstan
4 shared publications - Sandugash Tanirbergenova
Institute of Combustion Problems, Almaty 050012, Kazakhstan
4 shared publications - Aizat Aitugan
The Institute of Combustion Problems, Almaty 050000, Kazakhstan
3 shared publications - Gulya Moldazhanova
The Institute of Combustion Problems, Almaty 050000, Kazakhstan
3 shared publications - Zulkhair Aimukhametovich Mansurov
Al-Farabi Kazakh National University, Almaty, Kazakhstan
3 shared publications
Latest Publications
- Open Access
Recycling of Petroleum-Based Lubricants into High-Value Petrochemicals and Carbon-Based Materials
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, techno-economic indicators, and life cycle assessment outcomes are comparatively analyzed to outline current trends, technical challenges, and future development directions in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.
Open AccessRecycling of Petroleum-Based Lubricants into High-Value Petrochemicals and Carbon-Based Materials
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, techno-economic indicators, and life cycle assessment outcomes are comparatively analyzed to outline current trends, technical challenges, and future development directions in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.
- Open Access
- 21 May 2026
- Published by MDPI AG in Preprints.org
Recycling of Petroleum-Based Lubricants into High-Value Petrochemicals and Carbon-Based Materials
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, and economic aspects are comparatively analyzed to outline current trends and technical challenges in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management, but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.
- 21 May 2026
- Published by MDPI AG in Preprints.org
Open AccessRecycling of Petroleum-Based Lubricants into High-Value Petrochemicals and Carbon-Based Materials
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, and economic aspects are comparatively analyzed to outline current trends and technical challenges in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management, but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.
- Open Access
Effect of Acid Treatment on the Structure of Natural Zeolite from the Shankhanai Deposit
Natural clinoptilolite from the Shankhanai deposit (Kazakhstan) was modified via acid and thermal treatments to improve its physicochemical and catalytic properties. The zeolite was activated using 10% nitric acid alone, nitric acid followed by thermal treatment (600 °C), and a mixed acid solution (10% HNO3 + 5% CH3COOH) followed by mild thermal treatment (280 °C). Structural, textural, and thermal changes were characterized by XRD, FTIR, BET, TGA, SEM, and EDX. Nitric acid treatment increased the BET surface area from 4.95 to 59.9 m2/g but reduced crystallinity, whereas the dual-acid approach enhanced porosity and acidity while preserving framework integrity. Preliminary catalytic testing in thiophene hydrodesulfurization (HDS) revealed improved conversion (up to 20.7%) in the absence of active metals, confirming the potential of modified clinoptilolite as a catalyst support. The dual-acid method presents a promising, eco-friendly pathway for producing thermally stable and catalytically active zeolitic materials, suitable for selective hydrodesulfurization of thiophene.
Open AccessEffect of Acid Treatment on the Structure of Natural Zeolite from the Shankhanai Deposit
Natural clinoptilolite from the Shankhanai deposit (Kazakhstan) was modified via acid and thermal treatments to improve its physicochemical and catalytic properties. The zeolite was activated using 10% nitric acid alone, nitric acid followed by thermal treatment (600 °C), and a mixed acid solution (10% HNO3 + 5% CH3COOH) followed by mild thermal treatment (280 °C). Structural, textural, and thermal changes were characterized by XRD, FTIR, BET, TGA, SEM, and EDX. Nitric acid treatment increased the BET surface area from 4.95 to 59.9 m2/g but reduced crystallinity, whereas the dual-acid approach enhanced porosity and acidity while preserving framework integrity. Preliminary catalytic testing in thiophene hydrodesulfurization (HDS) revealed improved conversion (up to 20.7%) in the absence of active metals, confirming the potential of modified clinoptilolite as a catalyst support. The dual-acid method presents a promising, eco-friendly pathway for producing thermally stable and catalytically active zeolitic materials, suitable for selective hydrodesulfurization of thiophene.
- Open Access
Studying the Characteristics of Tank Oil Sludge
Oil sludge is one of the main pollutants generated by the oil industry. Due to serious pollution and increasing oil production, problems arise every year in the effective treatment of oil sludge. The current study examines the composition and physicochemical characteristics of oil sludge, as well as traditional and new methods for processing oil sludge. With the tightening of environmental protection requirements, oil sludge quality reduction, recycling, and harmless treatment technologies will become necessary in the future. The primary task was to determine the composition of tank oil sludge, separate it from mechanical impurities, and study the influence of ultrasonic treatment and subsequent atmospheric distillation on the extract. The separation of the concentrate and the composition of the tank oil sludge, using an extracted mixture of hexane and benzene, are considered. The use of modern SEM methods, elemental analysis, NMR analysis, IR, ultrasound, and GC–mass spectrometry made it possible to characterize the organic part of reservoir oil sludge and its distillation products. First, 300 g of tank oil sludge was preheated and mixed with 300 mL of solvent (hexane:benzene = 1:1). After mixing with the solvent, the result mixture was filtered. Then, it was placed in an ultrasonic bath and exposed to ultrasound at a frequency of 100 kHz for 30 min. After processing, it was extracted in a Soxhlet apparatus at a temperature of 65 °C to isolate the extract. The resulting extract was analyzed on a gas chromatograph with mass detection. The composition of the extract was as follows (in %): hexane—83.99; total hydrocarbon isomers—7.12; n-hydrocarbons—2.52; benzene—6.37%. At a temperature of 85 °C, the benzene yield was 65.85%. It has been established that the fractions obtained through the distillation of oil sludge at temperatures of 65–85 °C have improved dissolving capacity. It has also been shown that the use of these fractions promotes an increase in the content of hydrocarbon isomers by 12–13% in the extract composition.
Open AccessStudying the Characteristics of Tank Oil Sludge
Oil sludge is one of the main pollutants generated by the oil industry. Due to serious pollution and increasing oil production, problems arise every year in the effective treatment of oil sludge. The current study examines the composition and physicochemical characteristics of oil sludge, as well as traditional and new methods for processing oil sludge. With the tightening of environmental protection requirements, oil sludge quality reduction, recycling, and harmless treatment technologies will become necessary in the future. The primary task was to determine the composition of tank oil sludge, separate it from mechanical impurities, and study the influence of ultrasonic treatment and subsequent atmospheric distillation on the extract. The separation of the concentrate and the composition of the tank oil sludge, using an extracted mixture of hexane and benzene, are considered. The use of modern SEM methods, elemental analysis, NMR analysis, IR, ultrasound, and GC–mass spectrometry made it possible to characterize the organic part of reservoir oil sludge and its distillation products. First, 300 g of tank oil sludge was preheated and mixed with 300 mL of solvent (hexane:benzene = 1:1). After mixing with the solvent, the result mixture was filtered. Then, it was placed in an ultrasonic bath and exposed to ultrasound at a frequency of 100 kHz for 30 min. After processing, it was extracted in a Soxhlet apparatus at a temperature of 65 °C to isolate the extract. The resulting extract was analyzed on a gas chromatograph with mass detection. The composition of the extract was as follows (in %): hexane—83.99; total hydrocarbon isomers—7.12; n-hydrocarbons—2.52; benzene—6.37%. At a temperature of 85 °C, the benzene yield was 65.85%. It has been established that the fractions obtained through the distillation of oil sludge at temperatures of 65–85 °C have improved dissolving capacity. It has also been shown that the use of these fractions promotes an increase in the content of hydrocarbon isomers by 12–13% in the extract composition.
- Open Access
Surface Characteristics of Activated Carbon Sorbents Obtained from Biomass for Cleaning Oil-Contaminated Soils
This study explores the sorption capacity and field application of activated carbons (ACs) derived from plant residues for the remediation of oil-contaminated soils. ACs were prepared from rice husks, reed stalks, pine sawdust and wheat straw using two-stage pyrolysis and chemical activation with potassium hydroxide. The structural and physicochemical properties of these ACs were analyzed using BET surface area measurements, SEM analysis, Raman spectroscopy and FTIR spectroscopy. Sorption experiments at room temperature demonstrated that AC from rice husks (OSL) exhibited the highest sorption capacities for gasoline, kerosene and diesel fuel, with values of 9.3 g/g, 9.0 g/g and 10.1 g/g, respectively. These results are attributed to the well-developed microporous and mesoporous structures of OSL, as confirmed by SEM images and a BET surface area of 2790 m2/g. Field tests conducted at the “Zhanatalap” oil deposit showed that the ACs effectively reduced the oil content in contaminated soils from 79.2 g/kg to as low as 2.6 g/kg, achieving a purification degree of up to 67% within 16 days. This study highlights the critical role of structural properties, such as porosity and graphitization degree, in enhancing the sorption efficiency of ACs.
Open AccessSurface Characteristics of Activated Carbon Sorbents Obtained from Biomass for Cleaning Oil-Contaminated Soils
This study explores the sorption capacity and field application of activated carbons (ACs) derived from plant residues for the remediation of oil-contaminated soils. ACs were prepared from rice husks, reed stalks, pine sawdust and wheat straw using two-stage pyrolysis and chemical activation with potassium hydroxide. The structural and physicochemical properties of these ACs were analyzed using BET surface area measurements, SEM analysis, Raman spectroscopy and FTIR spectroscopy. Sorption experiments at room temperature demonstrated that AC from rice husks (OSL) exhibited the highest sorption capacities for gasoline, kerosene and diesel fuel, with values of 9.3 g/g, 9.0 g/g and 10.1 g/g, respectively. These results are attributed to the well-developed microporous and mesoporous structures of OSL, as confirmed by SEM images and a BET surface area of 2790 m2/g. Field tests conducted at the “Zhanatalap” oil deposit showed that the ACs effectively reduced the oil content in contaminated soils from 79.2 g/kg to as low as 2.6 g/kg, achieving a purification degree of up to 67% within 16 days. This study highlights the critical role of structural properties, such as porosity and graphitization degree, in enhancing the sorption efficiency of ACs.
- Open Access
- 18 July 2024
- Published by MDPI AG in Preprints.org
Surface Characteristics of Activated Carbon Sorbents Obtained from Biomass for Cleaning Oil-Contaminated Soils
This study investigates the characteristics of activated carbons derived from biomass plant residues: rice husk (OSL) of the genus Oryza, reed stalks (PhAC) of the genus Phragmites, pine sawdust (PSL) of the genus Pinus, and wheat straw (TAL) of the genus Triticum. Activation was carried out using potassium hydroxide, employing a two-stage pyrolysis under air. The study examined the influence of activation temperature, duration, concentration of the impregnating agent, and impregnation time. Characteristics such as sorbent porosity, bulk density, and hydrocarbon sorption capacity were determined. Adsorption capacity was assessed using BET analysis and the iodine number determination method, with the highest iodine number achieved being 2809 mg/g, indicating high adsorption capability. The structural morphology of the activated carbons was evaluated by SEM, and their chemical surface characteristics were identified by IR spectroscopy. Computational analysis of the nitrogen sorption isotherms using the Barrett-Joyner-Halenda (B-J-H) method and the Dubinin-Radushkevich (D-R) equation showed that activated carbon samples from rice husk and pine sawdust possess a developed specific surface area and contain micro- and mesopores. The Dubinin-Astakhov (D-A) approach was used to study the pore diameter of activated carbon, revealing significant findings on pore structure. The maximum micropore volume was found in activated carbon samples from pine sawdust (PSL), measuring 0.46 cm³/g. All activated carbon samples of plant origin were tested under field conditions for the remediation of oil-contaminated areas near the “Zhanatalap” oil field in the Atyrau region. By the 16th day, the oil-contaminated soil treated with rice husk activated carbon was cleaned by 67.1%.
- 18 July 2024
- Published by MDPI AG in Preprints.org
Open AccessSurface Characteristics of Activated Carbon Sorbents Obtained from Biomass for Cleaning Oil-Contaminated Soils
This study investigates the characteristics of activated carbons derived from biomass plant residues: rice husk (OSL) of the genus Oryza, reed stalks (PhAC) of the genus Phragmites, pine sawdust (PSL) of the genus Pinus, and wheat straw (TAL) of the genus Triticum. Activation was carried out using potassium hydroxide, employing a two-stage pyrolysis under air. The study examined the influence of activation temperature, duration, concentration of the impregnating agent, and impregnation time. Characteristics such as sorbent porosity, bulk density, and hydrocarbon sorption capacity were determined. Adsorption capacity was assessed using BET analysis and the iodine number determination method, with the highest iodine number achieved being 2809 mg/g, indicating high adsorption capability. The structural morphology of the activated carbons was evaluated by SEM, and their chemical surface characteristics were identified by IR spectroscopy. Computational analysis of the nitrogen sorption isotherms using the Barrett-Joyner-Halenda (B-J-H) method and the Dubinin-Radushkevich (D-R) equation showed that activated carbon samples from rice husk and pine sawdust possess a developed specific surface area and contain micro- and mesopores. The Dubinin-Astakhov (D-A) approach was used to study the pore diameter of activated carbon, revealing significant findings on pore structure. The maximum micropore volume was found in activated carbon samples from pine sawdust (PSL), measuring 0.46 cm³/g. All activated carbon samples of plant origin were tested under field conditions for the remediation of oil-contaminated areas near the “Zhanatalap” oil field in the Atyrau region. By the 16th day, the oil-contaminated soil treated with rice husk activated carbon was cleaned by 67.1%.