Gulya Moldazhanova
Research Subjects
Gulya Moldazhanova has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Aizat Aitugan
The Institute of Combustion Problems, Almaty 050000, Kazakhstan
4 shared publications - Dildara Tugelbayeva
The Institute of Combustion Problems, Almaty 050000, Kazakhstan
4 shared publications - Nurzhamal Zhylybayeva
Institute of Combustion Problems, Almaty 050012, Kazakhstan
4 shared publications - Sandugash Tanirbergenova
Institute of Combustion Problems, Almaty 050012, Kazakhstan
4 shared publications - Zulkhair Aimukhametovich Mansurov
Al-Farabi Kazakh National University, Almaty, Kazakhstan
4 shared publications - Kairat Tazhu
The Institute of Combustion Problems, Almaty 050000, Kazakhstan
3 shared publications
Latest Publications
- Open Access
Recycling of Petroleum-Based Lubricants into High-Value Petrochemicals and Carbon-Based Materials
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, techno-economic indicators, and life cycle assessment outcomes are comparatively analyzed to outline current trends, technical challenges, and future development directions in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.
Open AccessRecycling of Petroleum-Based Lubricants into High-Value Petrochemicals and Carbon-Based Materials
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, techno-economic indicators, and life cycle assessment outcomes are comparatively analyzed to outline current trends, technical challenges, and future development directions in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.
- Open Access
- 21 May 2026
- Published by MDPI AG in Preprints.org
Recycling of Petroleum-Based Lubricants into High-Value Petrochemicals and Carbon-Based Materials
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, and economic aspects are comparatively analyzed to outline current trends and technical challenges in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management, but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.
- 21 May 2026
- Published by MDPI AG in Preprints.org
Open AccessRecycling of Petroleum-Based Lubricants into High-Value Petrochemicals and Carbon-Based Materials
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, and economic aspects are comparatively analyzed to outline current trends and technical challenges in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management, but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.
- Open Access
Effect of Acid Treatment on the Structure of Natural Zeolite from the Shankhanai Deposit
Natural clinoptilolite from the Shankhanai deposit (Kazakhstan) was modified via acid and thermal treatments to improve its physicochemical and catalytic properties. The zeolite was activated using 10% nitric acid alone, nitric acid followed by thermal treatment (600 °C), and a mixed acid solution (10% HNO3 + 5% CH3COOH) followed by mild thermal treatment (280 °C). Structural, textural, and thermal changes were characterized by XRD, FTIR, BET, TGA, SEM, and EDX. Nitric acid treatment increased the BET surface area from 4.95 to 59.9 m2/g but reduced crystallinity, whereas the dual-acid approach enhanced porosity and acidity while preserving framework integrity. Preliminary catalytic testing in thiophene hydrodesulfurization (HDS) revealed improved conversion (up to 20.7%) in the absence of active metals, confirming the potential of modified clinoptilolite as a catalyst support. The dual-acid method presents a promising, eco-friendly pathway for producing thermally stable and catalytically active zeolitic materials, suitable for selective hydrodesulfurization of thiophene.
Open AccessEffect of Acid Treatment on the Structure of Natural Zeolite from the Shankhanai Deposit
Natural clinoptilolite from the Shankhanai deposit (Kazakhstan) was modified via acid and thermal treatments to improve its physicochemical and catalytic properties. The zeolite was activated using 10% nitric acid alone, nitric acid followed by thermal treatment (600 °C), and a mixed acid solution (10% HNO3 + 5% CH3COOH) followed by mild thermal treatment (280 °C). Structural, textural, and thermal changes were characterized by XRD, FTIR, BET, TGA, SEM, and EDX. Nitric acid treatment increased the BET surface area from 4.95 to 59.9 m2/g but reduced crystallinity, whereas the dual-acid approach enhanced porosity and acidity while preserving framework integrity. Preliminary catalytic testing in thiophene hydrodesulfurization (HDS) revealed improved conversion (up to 20.7%) in the absence of active metals, confirming the potential of modified clinoptilolite as a catalyst support. The dual-acid method presents a promising, eco-friendly pathway for producing thermally stable and catalytically active zeolitic materials, suitable for selective hydrodesulfurization of thiophene.
- Open Access
- 11 August 2025
- Published by MDPI AG in Preprints.org
Effect of Acid Treatment on the Structure of Natural Zeolite from the Shankanay Deposit
Natural clinoptilolite from the Shankhanai deposit (Kazakhstan) was modified via acid and thermal treatments to improve its physicochemical and catalytic properties. The zeolite was activated using 10% nitric acid alone, nitric acid followed by thermal treatment (600 °C), and a mixed acid solution (10% HNO₃ + 5% CH₃COOH) followed by mild thermal treatment (280 °C). Structural, textural, and thermal changes were characterized by XRD, FTIR, BET, TGA, SEM, and EDX. While nitric acid improved surface area (BET up to 59.9 m²/g), it compromised crystallinity. The mixed acid approach effectively enhanced porosity and acidity while preserving structural integrity. Preliminary catalytic testing in thiophene hydrodesulfurization showed improved conversion (up to 20.7%) in the absence of active metals, confirming the potential of modified zeolite as a catalyst support. The dual-acid method presents a promising, eco-friendly pathway for producing thermally stable and catalytically active zeolitic materials.
- 11 August 2025
- Published by MDPI AG in Preprints.org
Open AccessEffect of Acid Treatment on the Structure of Natural Zeolite from the Shankanay Deposit
Natural clinoptilolite from the Shankhanai deposit (Kazakhstan) was modified via acid and thermal treatments to improve its physicochemical and catalytic properties. The zeolite was activated using 10% nitric acid alone, nitric acid followed by thermal treatment (600 °C), and a mixed acid solution (10% HNO₃ + 5% CH₃COOH) followed by mild thermal treatment (280 °C). Structural, textural, and thermal changes were characterized by XRD, FTIR, BET, TGA, SEM, and EDX. While nitric acid improved surface area (BET up to 59.9 m²/g), it compromised crystallinity. The mixed acid approach effectively enhanced porosity and acidity while preserving structural integrity. Preliminary catalytic testing in thiophene hydrodesulfurization showed improved conversion (up to 20.7%) in the absence of active metals, confirming the potential of modified zeolite as a catalyst support. The dual-acid method presents a promising, eco-friendly pathway for producing thermally stable and catalytically active zeolitic materials.