B. Zh. Salkynbayev
Research Subjects
B. Zh. Salkynbayev has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Nursultan Ulmaganbetov
ERG Scientific Research and Engineering Center LLP, Aktobe 030000, Kazakhstan
2 shared publications - S. A. Laikhan
ТОО «Научно-исследовательский инжиниринговый центр ERG», г. Актобе, Казахстан
2 shared publications - I. R. Manashev
Nosov Magnitogorsk State Technical University
1 shared publication - M. K. Jundibayev
ТОО «Научно-исследовательский инжиниринговый центр ERG», г. Актобе, Казахстан
1 shared publication - M. S. Dossekenov
Zhubanov Regional State University, Aktobe, Republic of Kazakhstan
1 shared publication - Maral Almagambetov
ERG Scientific Research and Engineering Center LLP, Aktobe 030000, Kazakhstan
1 shared publication
Latest Publications
- 30 June 2025
- Published by Toraighyrov University in Science and Technology of Kazakhstan
- No. 2,2025,p. 302-311
PELLETIZING OF FINE CHROME RAW MATERIALS WITH POLYMER BINDERS
"The article presents the results of laboratory studies on agglomeration of gas cleaning sludge mixed with rich dust from inertial collectors and dust after drying chrome ore. The technological process of pelletizing, which consists of: preparation of raw materials for pelletizing (crushing, classification, drying and mixing of components), pellet processing operations for the purpose of separating fines and strengthening. In this work, polymeric binders act as binders: cement, clay powder for chrome pellets, organic binder ligno and polymer binder, which is a polymer based on acrylic acid amide and an inorganic binder. Different types of binders, each of which has specific requirements. Several types of basic materials and binders, to determine the optimal recipe for pelletizing fine-grade ore raw materials, humidity and cold agglomeration modes. Qualitative and quantitative indicators of the obtained agglomerated products are estimated. The optimal composition of the mixture for agglomeration has been formulated. The results of measuring the mechanical properties have been obtained, tables for drop, impact and abrasion are provided, as well as drawings of the results of pelletized materials. The factors influencing the quality of pellets have been determined. Keywords: Pelletization, binder, wet dust, drying, pellets, sludge, granulator.
- 30 June 2025
- Published by Toraighyrov University in Science and Technology of Kazakhstan
- No. 2,2025,p. 302-311
PELLETIZING OF FINE CHROME RAW MATERIALS WITH POLYMER BINDERS
"The article presents the results of laboratory studies on agglomeration of gas cleaning sludge mixed with rich dust from inertial collectors and dust after drying chrome ore. The technological process of pelletizing, which consists of: preparation of raw materials for pelletizing (crushing, classification, drying and mixing of components), pellet processing operations for the purpose of separating fines and strengthening. In this work, polymeric binders act as binders: cement, clay powder for chrome pellets, organic binder ligno and polymer binder, which is a polymer based on acrylic acid amide and an inorganic binder. Different types of binders, each of which has specific requirements. Several types of basic materials and binders, to determine the optimal recipe for pelletizing fine-grade ore raw materials, humidity and cold agglomeration modes. Qualitative and quantitative indicators of the obtained agglomerated products are estimated. The optimal composition of the mixture for agglomeration has been formulated. The results of measuring the mechanical properties have been obtained, tables for drop, impact and abrasion are provided, as well as drawings of the results of pelletized materials. The factors influencing the quality of pellets have been determined. Keywords: Pelletization, binder, wet dust, drying, pellets, sludge, granulator.
- Open Access
- 30 September 2024
- Published by K. Zhubanov Aktobe Regional University in Научный журнал "Вестник Актюбинского регионального университета имени К. Жубанова"
- Vol. 77 (3) , 124-129
УТИЛИЗАЦИЯ МЕТАЛЛИЧЕСКОГО ПОРОШКА ВЫСОКОУГЛЕРОДИСТОГО ФЕРРОХРОМА МЕТОДОМ САМОРАСПРОСТРАНЯЮЩЕГОСЯ ВЫСОКОТЕМПЕРАТУРНОГО СИНТЕЗА (СВС)
This article discusses the methods of recycling high-carbon ferrochrome metal powder by self-propagating high-temperature synthesis. The article is devoted to the study of aspiration metal dusts formed during the production of ferroalloys. The article analyzes the composition of the source material, its physicochemical properties, and the impact on the testing process. The publication touches upon the relevance of this topic and the advantages of the self-propagating high-temperature synthesis method. Particular attention was paid to comparative analyses of this method from other traditional material processing processes. This article will help to consider the problem of environmental pollution and the impact of traditional metallurgical processes on the ecosystem. The authors also analyze in detail the physical properties of the original powder samples and their combustion temperature mode. The publication shows the process flow charts, laboratory devices, and the type of resulting material. This article provides a detailed analysis of the types of laboratory devices, their physical and mechanical properties. The publication provides a thorough and detailed chemical analysis of the resulting material. In the course of the study, the expected results were obtained, which are presented in the form of tables and a figure. The article consists of an introduction, main part, conclusion, conclusion and list of references.
- 30 September 2024
- Published by K. Zhubanov Aktobe Regional University in Научный журнал "Вестник Актюбинского регионального университета имени К. Жубанова"
- Vol. 77 (3) , 124-129
Open AccessУТИЛИЗАЦИЯ МЕТАЛЛИЧЕСКОГО ПОРОШКА ВЫСОКОУГЛЕРОДИСТОГО ФЕРРОХРОМА МЕТОДОМ САМОРАСПРОСТРАНЯЮЩЕГОСЯ ВЫСОКОТЕМПЕРАТУРНОГО СИНТЕЗА (СВС)
This article discusses the methods of recycling high-carbon ferrochrome metal powder by self-propagating high-temperature synthesis. The article is devoted to the study of aspiration metal dusts formed during the production of ferroalloys. The article analyzes the composition of the source material, its physicochemical properties, and the impact on the testing process. The publication touches upon the relevance of this topic and the advantages of the self-propagating high-temperature synthesis method. Particular attention was paid to comparative analyses of this method from other traditional material processing processes. This article will help to consider the problem of environmental pollution and the impact of traditional metallurgical processes on the ecosystem. The authors also analyze in detail the physical properties of the original powder samples and their combustion temperature mode. The publication shows the process flow charts, laboratory devices, and the type of resulting material. This article provides a detailed analysis of the types of laboratory devices, their physical and mechanical properties. The publication provides a thorough and detailed chemical analysis of the resulting material. In the course of the study, the expected results were obtained, which are presented in the form of tables and a figure. The article consists of an introduction, main part, conclusion, conclusion and list of references.
- 13 October 2023
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 9(221),p. 41-47
Полимерлі байланыстырушы реагентті пайдалана отырып, Кемпірсай кен орнының ұсақ дисперсті хром шикізатын кесектеу тәсілдері
This article describes the existing methods of pelletizing crude ore materials. Their main methods and mechanisms have been considered. The technologies of formation of briquettes and brexes have been described in detail. In the work, fine chromium raw materials from Kempirsay deposit are used as materials under study. The material is a loose substance obtained after drying chrome ore. The chemical and particle size distribution composition of fine chromium raw materials is given. The binder is polyacrylamide. A comparative analysis and differences between the methods of pelletizing have been carried out. The methods of pelletizing have been described, and the results of laboratory research on pelletizing have been obtained. The qualitative indicators of the obtained pelletized products were evaluated. The recipe for the optimal composition of the mixture for pelletizing has been selected. The factors affecting the quality of briquettes and brexes have been determined Бұл мақалада кен шикізатын өңдеудің қолданыстағы әдістері сипатталған. Олардың негізгі әдістері мен механизмдері қарастырылады. Брикеттер мен брекстерді қалыптастыру технологиялары егжей-тегжейлі сипатталған. Жұмыста зерттелетін материалдар ретінде Кемпірсай кен орнының ұсақ дисперсті хром шикізаты пайдаланылды. Материал-хром кенін кептіргеннен кейін алынған сусымалы зат. Ұсақ дисперсті шикізаттың химиялық және гранулометриялық құрамы келтірілген. Байланыстырушы материал ретінде органикалық зат, қатты және аморфты материал полиакриламид қолданылады. Бұл акрил қышқылының амидіне негізделген полимер, иіссіз, ұнтақ мөлшері 1 мм-ден аз болып келеді. Салыстырмалы талдау жасалды, кесектеу брикеттер мен брэкстер арасындағы айырмашылықтар талқыланады. Брикеттер мен брекстер қаттылық қасиетін аңықтау үшін, беріктігін анықтауға арналған қондырғыда, арнайы соққыда және барабанда сыналды. Кестеде көрсетілген брикеттер мен брекстердің беріктігін аңықтау нәтижелері келтірілген. Алынған өнімдердің сапалық көрсеткіштері және тасымалдауға төзімділігі және көптеген құймалар бағаланды. Қоспаның оңтайлы құрамының рецепті таңдалады. Брикеттер мен брекстердің сапасына әсер ететін факторлар анықталды В данной статье описаны существующие способы окускования рудного сырья. Рассмотрены их основные методы и механизмы. Подробно описаны технологии формирования брикетов и брэксов. В работе в качестве исследуемых материалов использованы мелкодисперсное хромовое сырье Кемпирсайского месторождения. Материал представляет собой сыпучее вещество, получаемое после сушки хромовой руды. Приведены химический и гранулометрический состав мелкодисперсного хромого сырья. Связующим материалом выступает органическое вещество, твердый и аморфный материал полиакриламид, представляющий собой полимер на основе амида акриловой кислоты, без запаха, порошок крупностью менее 1 мм. Был сделан сравнительный анализ и отличия между способами окускования. Расписаны методика проведения окускования, а также получены результаты лабораторных исследований по окускованию. Брикеты и брэксы были испытаны на сброс, на установке по определению прочности на сбрасывание, на удар и истирание. Приведены результаты испытания брикетов и брэксов на прочность, которые представлены на графике. Оценены качественные показатели полученных окускованных продуктов и устойчивости к транспортировке и многочисленных пересыпок. Подобрана рецептура оптимального состава смеси для окускования. Определены факторы, влияющие на качество брикетов и брэксов
- 13 October 2023
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 9(221),p. 41-47
Полимерлі байланыстырушы реагентті пайдалана отырып, Кемпірсай кен орнының ұсақ дисперсті хром шикізатын кесектеу тәсілдері
This article describes the existing methods of pelletizing crude ore materials. Their main methods and mechanisms have been considered. The technologies of formation of briquettes and brexes have been described in detail. In the work, fine chromium raw materials from Kempirsay deposit are used as materials under study. The material is a loose substance obtained after drying chrome ore. The chemical and particle size distribution composition of fine chromium raw materials is given. The binder is polyacrylamide. A comparative analysis and differences between the methods of pelletizing have been carried out. The methods of pelletizing have been described, and the results of laboratory research on pelletizing have been obtained. The qualitative indicators of the obtained pelletized products were evaluated. The recipe for the optimal composition of the mixture for pelletizing has been selected. The factors affecting the quality of briquettes and brexes have been determined Бұл мақалада кен шикізатын өңдеудің қолданыстағы әдістері сипатталған. Олардың негізгі әдістері мен механизмдері қарастырылады. Брикеттер мен брекстерді қалыптастыру технологиялары егжей-тегжейлі сипатталған. Жұмыста зерттелетін материалдар ретінде Кемпірсай кен орнының ұсақ дисперсті хром шикізаты пайдаланылды. Материал-хром кенін кептіргеннен кейін алынған сусымалы зат. Ұсақ дисперсті шикізаттың химиялық және гранулометриялық құрамы келтірілген. Байланыстырушы материал ретінде органикалық зат, қатты және аморфты материал полиакриламид қолданылады. Бұл акрил қышқылының амидіне негізделген полимер, иіссіз, ұнтақ мөлшері 1 мм-ден аз болып келеді. Салыстырмалы талдау жасалды, кесектеу брикеттер мен брэкстер арасындағы айырмашылықтар талқыланады. Брикеттер мен брекстер қаттылық қасиетін аңықтау үшін, беріктігін анықтауға арналған қондырғыда, арнайы соққыда және барабанда сыналды. Кестеде көрсетілген брикеттер мен брекстердің беріктігін аңықтау нәтижелері келтірілген. Алынған өнімдердің сапалық көрсеткіштері және тасымалдауға төзімділігі және көптеген құймалар бағаланды. Қоспаның оңтайлы құрамының рецепті таңдалады. Брикеттер мен брекстердің сапасына әсер ететін факторлар анықталды В данной статье описаны существующие способы окускования рудного сырья. Рассмотрены их основные методы и механизмы. Подробно описаны технологии формирования брикетов и брэксов. В работе в качестве исследуемых материалов использованы мелкодисперсное хромовое сырье Кемпирсайского месторождения. Материал представляет собой сыпучее вещество, получаемое после сушки хромовой руды. Приведены химический и гранулометрический состав мелкодисперсного хромого сырья. Связующим материалом выступает органическое вещество, твердый и аморфный материал полиакриламид, представляющий собой полимер на основе амида акриловой кислоты, без запаха, порошок крупностью менее 1 мм. Был сделан сравнительный анализ и отличия между способами окускования. Расписаны методика проведения окускования, а также получены результаты лабораторных исследований по окускованию. Брикеты и брэксы были испытаны на сброс, на установке по определению прочности на сбрасывание, на удар и истирание. Приведены результаты испытания брикетов и брэксов на прочность, которые представлены на графике. Оценены качественные показатели полученных окускованных продуктов и устойчивости к транспортировке и многочисленных пересыпок. Подобрана рецептура оптимального состава смеси для окускования. Определены факторы, влияющие на качество брикетов и брэксов