MZM.I. Zamiatin

M.I. Zamiatin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M.I. Zamiatin has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    COMPARATIVE STUDY OF THE INFLUENCE OF FLUX AND FLUXLESS PROTECTION ON THE CORROSION RESISTANCE OF AZ91D ALLOY CASTINGS

    by K.O. Kreitser, T.V. Lysenko, E.M. Kozishkurt, M.I. Zamiatin

    The paper presents the results of a comparative study of the influence of the magnesium melt protection type (flux protection with the use of VI2 flux and fluxless gas protection based on a SO₂ + SF₆ mixture) on the corrosion resistance, microstructure, and mechanical properties of castings made of the AZ91D alloy obtained by high-pressure die casting on a hot-chamber machine. The expediency of transition from the traditional flux protection — which is a source of hygroscopic chloride inclusions and corresponding micro-galvanic corrosion sites — to a fluxless melt protection technology under a gas atmosphere isolating the melt mirror without contaminating the alloy with non-metallic inclusions is substantiated. The test methodology included accelerated climatic tests (4 cycles of 24 hours each) and long-term atmospheric tests of specimens with dimensions of 40×40×1 mm. The corrosion resistance was evaluated by gravimetric (K_grav, g/m²·h) and depth (P, mm/year) indicators, as well as by the conventional 10-point corrosion resistance scale for metals (terminology — according to DSTU EN ISO 8044:2018). The experimental data were processed by mathematical statistics methods; to establish the influence of the composition of the protective gas mixture, three series of experiments were carried out according to a 2³ full-factorial design matrix. It has been established that the application of fluxless gas protection leads to a substantial increase in corrosion resistance (K_grav decreases from 2.01 to 0.008 g/m²·h, P — from 10.3 to 0.04 mm/year), a decrease in gas content in the casting from 16 to 3 cm³/100 g, and an increase in the tensile strength from 196 to 265 MPa. Microstructural analysis confirmed the absence of non- metallic inclusions larger than 0.5 µm (within the resolution of optical microscopy) and the formation of an equiaxed fine-grained structure of the Al solid solution in Mg with a uniformly distributed γ-phase (Mg₁₇Al₁₂). The obtained results substantiate the transition of castings from the «completely unstable» group (10 points) to the «stable» group (4 points) of the corrosion resistance scale. У роботі представлено результати порівняльного дослідження впливу типу захисту магніє- вого розплаву (флюсового з використанням флюсу ВІ2 та безфлюсового газового на основі суміші SO₂ й SF₆) на корозійну стійкість, мікроструктуру та механічні властивості виливків зі сплаву AZ91D, отриманих литтям під високим тиском на машині з гарячою камерою пресування. Обґрунтовано доцільність переходу від традиційного флюсового захисту, який є джерелом гігроскопічних хлоридних включень і відповідних мікрогальванічних осередків корозії, до безфлюсової технології плавлення під газовою атмосферою, що ізолює дзеркало розплаву без забруднення сплаву неметалевими включеннями. Методика випробувань включала прискорені кліматичні випробування (4 цикли тривалістю 24 год) й тривалі атмосферні випробування зразків розмірами 40×40×1 мм. Корозійну стійкість оцінювали за ваговим (Кваг, г/м²·год) і глибинним (П, мм/рік) показниками, а також за прийнятою 10-бальною шкалою корозійної стійкості металів (терміни — за ДСТУ EN ISO 8044:2018). Експериментальні дані оброблено методами математичної статистики; для встановлення впливу складу захисної газової суміші проведено три серії однотипних експериментів за матрицею повнофакторного плану 2³. Встановлено, що застосування безфлюсового газового захисту забезпечує суттєве підвищення корозійної стійкості (Кваг знижується з 2,01 до 0,008 г/м²·год, П — з 10,3 до 0,04 мм/рік), зменшення вмісту газів у виливку з 16 до 3 см³/100 г та зростання межі міцності з 196 до 265 МПа. Мікроструктурний аналіз підтвердив відсутність неметалевих включень розміром понад 0,5 мкм (за роздільною здатністю оптичної мікроскопії) та формування рівноосної дрібнозернистої структури твердого розчину Al у Mg з рівномірно розподіленою γ-фазою (Mg₁₇Al₁₂).

  • Analysis of heat exchange processes in the "metal — non-stick coating — frozen mold" system

    by M.I. Zamiatin, T.V. Lysenko, M.P. Tur, K.O. Danilova, М.і. Замятін

    The article is devoted to the analysis of heat exchange processes in the "metal — non-stick coating — frozen mold" system, which is an important aspect of research in the field of materials science and industrial technology, as it affects the quality and efficiency of the final product. The study also paid special attention to the processes of heat exchange between the metal, the non-stick coating and the frozen mold thanks to the analysis of the obtained indicators, calculated and experimental data. In addition, it is necessary to take into account the interaction between the various elements of the system, such as the thermodynamic properties of the coating and the thermal insulation properties of the frozen mold. One of the key aspects of the analysis was taking into account the heat capacity and thermal conductivity of the materials that make up the system, since heat capacity indicates the ability of a material to absorb heat, and thermal conductivity determines its ability to transfer heat. The properties of the non-stick coating, which protects the metal from high temperatures and provides optimal conditions for freezing the mold, are considered, since they can affect heat exchange by reducing or increasing the contact between the metal and the frozen mold. Based on the obtained data, a nomogram was constructed to determine the minimum thickness of the frozen rod depending on the thickness of the casting wall and the cooling temperature of the mold. The developed mathematical model of the heat transfer process in the system is based on the method of cellular automata. The model adequately describes the real process and can be used for numerical studies. The results of the work provide an opportunity to help improve production technology and improve the quality of the final product thanks to the analysis of heat exchange processes in the "metal — non-stick coating — frozen mold" system.

  • Water gas saturation as a lever for controlling the level of properties of frozen foundry molds

    by L.I. Solonenko, S.I. Rep’yakh, M.I. Zamyatin, O.P. Bilyi, І.A. Kostenko, С.і. Реп’ях, М.і. Замятін

    The purpose of the work is to increase the survivability of sand-clay forms that freeze in equipment without the use of liquefied gases. Quartz sand 1K3O3016, bentonite clay BS2T2, kaolin clay KS2T2, tap water, carbonated water and degassed (boiled) water were used in the research. Flowability was determined according to GOST 23409.9, compressive strength — GOST 23409.7, gas permeability — GOST 29234.11. In order to achieve the specified level of the main parameters of sand-clay mixtures frozen at –15 °С with a simultaneous increase in the survivability of frozen casting molds and rods up to ~18 min, it is most appropriate to use a mixture of 5 % bentonite clay of the BS2T2 brand and 5 % of degassed (boiled) water with clay activation in such water as part of the mixture for 24 hours. At the same time, the use of KS2T2 kaolin clay as part of mixtures is impractical, since mixtures with such clay do not meet the requirements for molding and core mixtures. Molding mixtures consisting exclusively of sand and water are not suitable for the production of casting molds and rods due to high flowability. To increase the strength and reduce the flowability, it is necessary to use a mixture of sand, water and clay for the production of frozen molds and rods. Addition of bentonite (BS2T2) or kaolin (КS2Т2) clay to sand and water leads to a decrease in the flowability of frozen mixtures and an increase in their strength. Frozen at –15 °C mixtures with a kaolin clay content of up to 7 % (by mass) and 5 % (by mass) of tap water are characterized by increased flowability, which makes it impossible to use them as a molding or core mixture. When adding 5 % of bentonite clay BS2T2 swollen with degassed water to quartz sand, the flowability of the frozen mixture becomes less than 0.1 %, the gas permeability reaches 129 units, and the compressive strength exceeds 4.0 MPa, which meets the requirements for molding and rod mixtures. The gas saturation of water is a powerful lever in the system of controlling the level of properties of frozen casting molds, which include quartz sand and swollen bentonite clay.