Izzet Ozhamamcı
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Izzet Ozhamamcı has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Bilge Sayın
Department of Gastronomy and Culinary Arts, School of Tourism and Hotel Management, Ardahan University, Ardahan 75002, Türkiye
4 shared publications - Akif Göktuğ Bozkurt
Hacettepe University
1 shared publication - Pınar Kızılkaya
ARDAHAN ÜNİVERSİTESİ, ARDAHAN TEKNİK BİLİMLER MESLEK YÜKSEKOKULU
1 shared publication
Latest Publications
- Open Access
- 22 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 2138
A New Insight into Ancient Wheat Pasta: Physicochemical, Technological and Cooking Quality of Triticum dicoccum (Emmer)
Emmer (Triticum turgidum ssp. dicoccum) is attracting renewed interest as a nutrient-dense ancient wheat for sustainable cereal foods; however, product-level evidence for region-specific landraces remains limited. This study characterizes pasta produced exclusively from 100% Triticum dicoccum semolina cultivated in Ardahan (Türkiye) by integrating proximate composition, cooking performance, and instrumental texture (TPA). The emmer pasta contained 12.70% protein, 4.93% total dietary fiber, and 1.68% ash, with an energy value of 366.25 kcal/100 g. Cooking tests revealed 10.86% cooking loss, 219.98% water absorption, and 101.62% volume increase, indicating limited cooking tolerance consistent with a weaker starch–protein matrix. In comparison with conventional T. durum pasta, cooked emmer pasta exhibited comparable hardness, gumminess, and chewiness, but higher adhesiveness and springiness alongside lower resilience and cohesiveness. These results highlight Ardahan-grown T. dicoccum as a nutritionally valuable pasta raw material, albeit with technological constraints (particularly cooking loss) that warrant further optimization for industrial use.
- 22 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 2138
Open AccessA New Insight into Ancient Wheat Pasta: Physicochemical, Technological and Cooking Quality of Triticum dicoccum (Emmer)
Emmer (Triticum turgidum ssp. dicoccum) is attracting renewed interest as a nutrient-dense ancient wheat for sustainable cereal foods; however, product-level evidence for region-specific landraces remains limited. This study characterizes pasta produced exclusively from 100% Triticum dicoccum semolina cultivated in Ardahan (Türkiye) by integrating proximate composition, cooking performance, and instrumental texture (TPA). The emmer pasta contained 12.70% protein, 4.93% total dietary fiber, and 1.68% ash, with an energy value of 366.25 kcal/100 g. Cooking tests revealed 10.86% cooking loss, 219.98% water absorption, and 101.62% volume increase, indicating limited cooking tolerance consistent with a weaker starch–protein matrix. In comparison with conventional T. durum pasta, cooked emmer pasta exhibited comparable hardness, gumminess, and chewiness, but higher adhesiveness and springiness alongside lower resilience and cohesiveness. These results highlight Ardahan-grown T. dicoccum as a nutritionally valuable pasta raw material, albeit with technological constraints (particularly cooking loss) that warrant further optimization for industrial use.
- Open Access
- 11 January 2026
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 14 (1) , 206-215
Coffee Silverskin-Enriched Functional Pasta with Enhanced Dietary Fiber and Ash Content
Coffee silverskin (CSS) is a thin tegument that detaches from coffee beans during roasting. Although it is rich in dietary fiber, proteins, and bioactive compounds, CSS is often discarded, raising both environmental and economic sustainability concerns. In this study, pasta was formulated using semolina flour incorporation with 2.5% CSS powder. The proximate composition, cooking quality, textural properties, color parameters, and sensory characteristics of the pasta were comprehensively evaluated. The CSS-enriched pasta was found to contain 7.81% moisture, 1.97% ash, 10.58% protein, 1.62% fat, 72.3% carbohydrate, and 5.72% dietary fiber, with an energy content of 347.12 kcal/100 g. The optimum cooking time was 4.6 min, while the water-soluble matter was 10.78%. Texture analysis confirmed that the structural integrity of the pasta was preserved after cooking, with no evidence of disintegration. Color measurements showed values of L* = 55.84 ± 3.23, a* = 6.57 ± 0.73, and b* = 23.80 ± 1.70, indicating a moderately darker appearance. Sensory evaluation revealed that panelists perceived the product as similar to whole wheat pasta, without detecting any coffee flavor or aroma. Overall, these results indicate that CSS can be successfully incorporated into pasta formulations without adversely affecting their technological or sensory quality. Its use not only improves the nutritional profile by increasing dietary fiber and ash content (an indicator of total inorganic residue) but also contributes to the valorization of an underutilized coffee by-product, thereby supporting sustainable food production.
- 11 January 2026
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 14 (1) , 206-215
Open AccessCoffee Silverskin-Enriched Functional Pasta with Enhanced Dietary Fiber and Ash Content
Coffee silverskin (CSS) is a thin tegument that detaches from coffee beans during roasting. Although it is rich in dietary fiber, proteins, and bioactive compounds, CSS is often discarded, raising both environmental and economic sustainability concerns. In this study, pasta was formulated using semolina flour incorporation with 2.5% CSS powder. The proximate composition, cooking quality, textural properties, color parameters, and sensory characteristics of the pasta were comprehensively evaluated. The CSS-enriched pasta was found to contain 7.81% moisture, 1.97% ash, 10.58% protein, 1.62% fat, 72.3% carbohydrate, and 5.72% dietary fiber, with an energy content of 347.12 kcal/100 g. The optimum cooking time was 4.6 min, while the water-soluble matter was 10.78%. Texture analysis confirmed that the structural integrity of the pasta was preserved after cooking, with no evidence of disintegration. Color measurements showed values of L* = 55.84 ± 3.23, a* = 6.57 ± 0.73, and b* = 23.80 ± 1.70, indicating a moderately darker appearance. Sensory evaluation revealed that panelists perceived the product as similar to whole wheat pasta, without detecting any coffee flavor or aroma. Overall, these results indicate that CSS can be successfully incorporated into pasta formulations without adversely affecting their technological or sensory quality. Its use not only improves the nutritional profile by increasing dietary fiber and ash content (an indicator of total inorganic residue) but also contributes to the valorization of an underutilized coffee by-product, thereby supporting sustainable food production.
- 8 December 2025
- Published by Association of Food Technology, Turkey in Gıda
- Vol. 50 (6) , 1220-1229
COMPARATIVE EVALUATION OF TRADITIONAL AND INDUSTRIAL KASHAR CHEESES BASED ON PHYSICOCHEMICAL, TEXTURAL, COLOR, AND SENSORY ATTRIBUTES
This study investigated and compared the physicochemical, color, textural, and sensory properties of Kashar cheeses produced by traditional and industrial methods. For this purpose, 24 samples were collected: four from each of the four local producers in Ardahan and two from the national-scale industrial producers. The pH values of the samples varied according to the production type, with the lowest levels observed in the traditional samples (5.67–5.98). The external L* values ranged from 75.26 to 84.70, being higher in industrial samples. Traditional cheeses showed stronger yellow tones, as reflected by their higher b* values. Regarding texture, the adhesiveness of the cheese samples ranged from 0.63 to 1.56 mJ (p < 0.05). Sensory evaluation indicated that the traditional sample TK2 received the highest scores across all attributes. The results indicate that traditional Kashar cheeses differ in certain quality attributes and may be suitable for geographical indication and quality-based labeling.
- 8 December 2025
- Published by Association of Food Technology, Turkey in Gıda
- Vol. 50 (6) , 1220-1229
COMPARATIVE EVALUATION OF TRADITIONAL AND INDUSTRIAL KASHAR CHEESES BASED ON PHYSICOCHEMICAL, TEXTURAL, COLOR, AND SENSORY ATTRIBUTES
This study investigated and compared the physicochemical, color, textural, and sensory properties of Kashar cheeses produced by traditional and industrial methods. For this purpose, 24 samples were collected: four from each of the four local producers in Ardahan and two from the national-scale industrial producers. The pH values of the samples varied according to the production type, with the lowest levels observed in the traditional samples (5.67–5.98). The external L* values ranged from 75.26 to 84.70, being higher in industrial samples. Traditional cheeses showed stronger yellow tones, as reflected by their higher b* values. Regarding texture, the adhesiveness of the cheese samples ranged from 0.63 to 1.56 mJ (p < 0.05). Sensory evaluation indicated that the traditional sample TK2 received the highest scores across all attributes. The results indicate that traditional Kashar cheeses differ in certain quality attributes and may be suitable for geographical indication and quality-based labeling.
- 21 August 2025
- Published by Elsevier in Food Bioscience
- Vol. 72
Circular utilization of coffee silverskin in beef patties: Effects on technological, sensory, and safety attributes
- 21 August 2025
- Published by Elsevier in Food Bioscience
- Vol. 72
Circular utilization of coffee silverskin in beef patties: Effects on technological, sensory, and safety attributes
- Open Access
- 4 June 2025
- Published by Field Crops Central Research Institute in Tarla Bitkileri Merkez Arastirma Enstitusu
- Vol. 34 (1) , 25-33
Optimizing of acidic and alkaline pretreatments for enhanced sugar release of coffee silverskin: a taguchi method approach
Coffee by-products are promising reservoirs of antioxidants and fermentable sugars. Coffee silverskin (CSS) is a significant by-product of coffee bean roasting. In this study, glucose release from CSS was optimized to investigate the pretreatment parameters using the Taguchi method. For this purpose, four different acids (HCl, H2SO4, HNO3, and CH3COOH) and two alkalis (NaOH and KOH) were tested. The factors were acid/alkali type and amount (1, 2, 3, and 4%), CSS amount (2.5, 7.5, 12.5, and 17.5%), and treatment time (15, 30, 45, and 60 min). Sixteen experimental runs were performed using the L16 orthogonal array. The conditions under which maximum glucose release was obtained and the effects of these conditions on the process were examined. The maximum glucose yield (Yg= 0.037 gglucose/gbiomass) was obtained by autoclaving a 4% (v/v) HCl solution containing 17.5% CSS (w/v) for 60 min. This study evaluated the effectiveness of pre-enzymatic CSS treatments to produce fermentable sugars that are valuable for various industrial applications.
- 4 June 2025
- Published by Field Crops Central Research Institute in Tarla Bitkileri Merkez Arastirma Enstitusu
- Vol. 34 (1) , 25-33
Open AccessOptimizing of acidic and alkaline pretreatments for enhanced sugar release of coffee silverskin: a taguchi method approach
Coffee by-products are promising reservoirs of antioxidants and fermentable sugars. Coffee silverskin (CSS) is a significant by-product of coffee bean roasting. In this study, glucose release from CSS was optimized to investigate the pretreatment parameters using the Taguchi method. For this purpose, four different acids (HCl, H2SO4, HNO3, and CH3COOH) and two alkalis (NaOH and KOH) were tested. The factors were acid/alkali type and amount (1, 2, 3, and 4%), CSS amount (2.5, 7.5, 12.5, and 17.5%), and treatment time (15, 30, 45, and 60 min). Sixteen experimental runs were performed using the L16 orthogonal array. The conditions under which maximum glucose release was obtained and the effects of these conditions on the process were examined. The maximum glucose yield (Yg= 0.037 gglucose/gbiomass) was obtained by autoclaving a 4% (v/v) HCl solution containing 17.5% CSS (w/v) for 60 min. This study evaluated the effectiveness of pre-enzymatic CSS treatments to produce fermentable sugars that are valuable for various industrial applications.
- Open Access
- 24 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (15) , 6442
Coffee Silverskin as a Fat Replacer in Chicken Patty Formulation and Its Effect on Physicochemical, Textural, and Sensory Properties
Coffee silverskin (CSS) is a by-product released as waste after roasting coffee beans. This by-product can be used as a functional food ingredient as it contains many valuable compounds such as fibers, sugars, phenolic acids, carotenoids, and flavonoids. In this research, the effects of the partial substitution of animal fat with CSS on physicochemical, textural, and sensory properties in chicken patty production were investigated. For this purpose, four different groups of chicken patties were produced in which animal fat was replaced with CSS at different rates (control: 12% fat, SS1: 10% fat + 2% silverskin, SS2: 8% fat + 4% silverskin, SS3: 6% fat + 6% silverskin). The substitution of animal fat with CSS resulted in decreases in pH, moisture content, water activity, and color values while increasing TBARS (Thiobarbituric acid-reactive substances) and moisture retention. The cooking process also significantly affected the physicochemical properties (p < 0.01). Textural parameters, apart from adhesiveness, were affected by the replacement of animal fat with CSS. While hardness increased compared to the control, resilience, and springiness decreased. On the other hand, cohesiveness was similar in control and SS1 but decreased in other ratios. The use of CSS affected all sensory characteristics, and the sensory evaluation scores closest to the control were determined in the group that used 2% CSS instead of animal fat.
- 24 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (15) , 6442
Open AccessCoffee Silverskin as a Fat Replacer in Chicken Patty Formulation and Its Effect on Physicochemical, Textural, and Sensory Properties
Coffee silverskin (CSS) is a by-product released as waste after roasting coffee beans. This by-product can be used as a functional food ingredient as it contains many valuable compounds such as fibers, sugars, phenolic acids, carotenoids, and flavonoids. In this research, the effects of the partial substitution of animal fat with CSS on physicochemical, textural, and sensory properties in chicken patty production were investigated. For this purpose, four different groups of chicken patties were produced in which animal fat was replaced with CSS at different rates (control: 12% fat, SS1: 10% fat + 2% silverskin, SS2: 8% fat + 4% silverskin, SS3: 6% fat + 6% silverskin). The substitution of animal fat with CSS resulted in decreases in pH, moisture content, water activity, and color values while increasing TBARS (Thiobarbituric acid-reactive substances) and moisture retention. The cooking process also significantly affected the physicochemical properties (p < 0.01). Textural parameters, apart from adhesiveness, were affected by the replacement of animal fat with CSS. While hardness increased compared to the control, resilience, and springiness decreased. On the other hand, cohesiveness was similar in control and SS1 but decreased in other ratios. The use of CSS affected all sensory characteristics, and the sensory evaluation scores closest to the control were determined in the group that used 2% CSS instead of animal fat.