Joshua D Schilz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Joshua D Schilz has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Florian Kroll
Helmholtz-Zentrum Dresden - Rossendorf, Dresden, 01328, Germany
5 shared publications - Josefine Metzkes-Ng
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
5 shared publications - Ulrich Schramm
Helmholtz-Zentrum Dresden-Rossendorf
5 shared publications - Karl Zeil
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
4 shared publications - Florian-Emanuel Brack
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
3 shared publications - Jörg Pawelke
OncoRay - National Center for Radiation Research in Oncology, Medical Faculty and University Hospital Carl Gustav Carus, Technische Universität Dresden
3 shared publications
Latest Publications
- 28 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (13)
Laser-driven kA sub-100 ps current pulse generation and transport
We report the generation and transport of laser-driven discharge currents in the sub-100 ps, kiloampere regime. A target and transport architecture was developed to mitigate dispersion, distortion, reflections, and the risk of electrical breakdown, enabling efficient extraction and guided propagation of the laser-induced discharge current. Experiments performed with a petawatt-class laser demonstrate measured peak currents up to 1.6 kA into 50 Ω (∼80 kV) with a measured pulse duration of 70 ps, limited by the 6 GHz diagnostic bandwidth. Bandwidth-corrected extrapolation suggests intrinsic pulses of a few tens of picoseconds with multi-kiloampere amplitudes, requiring confirmation by higher-bandwidth measurements. These results establish laser-driven targets as a viable source of ultrafast, high-amplitude electrical pulses and open new opportunities for applications in pulsed power and strong-field science.
- 28 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (13)
Laser-driven kA sub-100 ps current pulse generation and transport
We report the generation and transport of laser-driven discharge currents in the sub-100 ps, kiloampere regime. A target and transport architecture was developed to mitigate dispersion, distortion, reflections, and the risk of electrical breakdown, enabling efficient extraction and guided propagation of the laser-induced discharge current. Experiments performed with a petawatt-class laser demonstrate measured peak currents up to 1.6 kA into 50 Ω (∼80 kV) with a measured pulse duration of 70 ps, limited by the 6 GHz diagnostic bandwidth. Bandwidth-corrected extrapolation suggests intrinsic pulses of a few tens of picoseconds with multi-kiloampere amplitudes, requiring confirmation by higher-bandwidth measurements. These results establish laser-driven targets as a viable source of ultrafast, high-amplitude electrical pulses and open new opportunities for applications in pulsed power and strong-field science.
- Open Access
- 27 December 2024
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (1) , 015032
Prediction of laser-induced breakdown in sub-micron-thick dielectric targets for laser-ion acceleration
In laser-ion acceleration experiments, the interaction of the rising flank of a high power laser pulse with the target can cause pre-ionization and subsequent target pre-expansion long before the arrival of the main laser peak. Exact knowledge of this target pre-expansion is required in order to understand the laser-plasma acceleration mechanisms with the help of numerical simulations. For dielectric targets, the starting point of target pre-expansion is characterized by the point in time at which the target undergoes laser-induced breakdown (LIB). In this work, we present a method to determine the time of LIB in sub-micron-thick Formvar targets during interaction with a specific high-power laser pulse. The required pulse-duration-dependent LIB threshold of Formvar is measured in a dedicated experiment. A comparison of LIB threshold to previously published data facilitates a generalization to other wide-band-gap dielectric targets for laser-ion acceleration.
- 27 December 2024
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (1) , 015032
Open AccessPrediction of laser-induced breakdown in sub-micron-thick dielectric targets for laser-ion acceleration
In laser-ion acceleration experiments, the interaction of the rising flank of a high power laser pulse with the target can cause pre-ionization and subsequent target pre-expansion long before the arrival of the main laser peak. Exact knowledge of this target pre-expansion is required in order to understand the laser-plasma acceleration mechanisms with the help of numerical simulations. For dielectric targets, the starting point of target pre-expansion is characterized by the point in time at which the target undergoes laser-induced breakdown (LIB). In this work, we present a method to determine the time of LIB in sub-micron-thick Formvar targets during interaction with a specific high-power laser pulse. The required pulse-duration-dependent LIB threshold of Formvar is measured in a dedicated experiment. A comparison of LIB threshold to previously published data facilitates a generalization to other wide-band-gap dielectric targets for laser-ion acceleration.
- Open Access
- 1 September 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (9)
Publisher’s Note: “Absolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches” [Rev. Sci. Instrum. 95, 073303 (2024)]
This article was originally published online on 26 July 2024 with missing affiliations for several authors. All author affiliations appear correctly above. AIP This article was originally published online on 26 July 2024 with missing affiliations for several authors. All author affiliations appear correctly above. AIP
- 1 September 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (9)
Open AccessPublisher’s Note: “Absolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches” [Rev. Sci. Instrum. 95, 073303 (2024)]
This article was originally published online on 26 July 2024 with missing affiliations for several authors. All author affiliations appear correctly above. AIP This article was originally published online on 26 July 2024 with missing affiliations for several authors. All author affiliations appear correctly above. AIP
- Open Access
- 1 July 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (7)
Absolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches
Laser-plasma accelerators (LPAs) can deliver pico- to nanosecond long proton bunches with ≳100 nC of charge dispersed over a broad energy spectrum. Increasing the repetition rates of today’s LPAs is a necessity for their practical application. This, however, creates a need for real-time proton bunch diagnostics. Scintillating screens are one detector solution commonly applied in the field of electron LPAs for spatially resolved particle and radiation detection. Yet their establishment for LPA proton detection is only slowly taking off, also due to the lack of available calibrations. In this paper, we present an absolute proton number calibration for the scintillating screen type DRZ High (Mitsubishi Chemical Corporation, Düsseldorf, Germany), one of the most sensitive screens according to calibrations for relativistic electrons and x rays. The presented absolute light yield calibration shows an uncertainty of the proton number of 10% and can seamlessly be applied at other LPA facilities. For proton irradiation of the DRZ High screen, we find an increase in light yield of >60% compared to reference calibration data for relativistic electrons. Moreover, we investigate the scintillating screen light yield dependence on proton energy since many types of scintillators (e.g., plastic, liquid, and inorganic) show a reduced light yield for increased local energy deposition densities, an effect termed ionization quenching. The ionization quenching can reduce the light yield for low-energy protons by up to ∼20%. This work provides all necessary data for absolute spectral measurements of LPA protons with DRZ High scintillating screens, e.g., when used in the commonly applied Thomson parabola spectrometers.
- 1 July 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (7)
Open AccessAbsolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches
Laser-plasma accelerators (LPAs) can deliver pico- to nanosecond long proton bunches with ≳100 nC of charge dispersed over a broad energy spectrum. Increasing the repetition rates of today’s LPAs is a necessity for their practical application. This, however, creates a need for real-time proton bunch diagnostics. Scintillating screens are one detector solution commonly applied in the field of electron LPAs for spatially resolved particle and radiation detection. Yet their establishment for LPA proton detection is only slowly taking off, also due to the lack of available calibrations. In this paper, we present an absolute proton number calibration for the scintillating screen type DRZ High (Mitsubishi Chemical Corporation, Düsseldorf, Germany), one of the most sensitive screens according to calibrations for relativistic electrons and x rays. The presented absolute light yield calibration shows an uncertainty of the proton number of 10% and can seamlessly be applied at other LPA facilities. For proton irradiation of the DRZ High screen, we find an increase in light yield of >60% compared to reference calibration data for relativistic electrons. Moreover, we investigate the scintillating screen light yield dependence on proton energy since many types of scintillators (e.g., plastic, liquid, and inorganic) show a reduced light yield for increased local energy deposition densities, an effect termed ionization quenching. The ionization quenching can reduce the light yield for low-energy protons by up to ∼20%. This work provides all necessary data for absolute spectral measurements of LPA protons with DRZ High scintillating screens, e.g., when used in the commonly applied Thomson parabola spectrometers.
- Open Access
- 23 January 2024
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 12, 1-11
miniSCIDOM: a scintillator-based tomograph for volumetric dose reconstruction of single laser-driven proton bunches
Laser plasma accelerators (LPAs) enable the generation of intense and short proton bunches on a micrometre scale, thus offering new experimental capabilities to research fields such as ultra-high dose rate radiobiology or material analysis. Being spectrally broadband, laser-accelerated proton bunches allow for tailored volumetric dose deposition in a sample via single bunches to excite or probe specific sample properties. The rising number of such experiments indicates a need for diagnostics providing spatially resolved characterization of dose distributions with volumes of approximately 1 cm ${}^3$ for single proton bunches to allow for fast online feedback. Here we present the scintillator-based miniSCIDOM detector for online single-bunch tomographic reconstruction of dose distributions in volumes of up to approximately 1 cm ${}^3$ . The detector achieves a spatial resolution below 500 $\unicode{x3bc}$ m and a sensitivity of 100 mGy. The detector performance is tested at a proton therapy cyclotron and an LPA proton source. The experiments’ primary focus is the characterization of the scintillator’s ionization quenching behaviour.- 23 January 2024
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 12, 1-11
Open AccessminiSCIDOM: a scintillator-based tomograph for volumetric dose reconstruction of single laser-driven proton bunches
Laser plasma accelerators (LPAs) enable the generation of intense and short proton bunches on a micrometre scale, thus offering new experimental capabilities to research fields such as ultra-high dose rate radiobiology or material analysis. Being spectrally broadband, laser-accelerated proton bunches allow for tailored volumetric dose deposition in a sample via single bunches to excite or probe specific sample properties. The rising number of such experiments indicates a need for diagnostics providing spatially resolved characterization of dose distributions with volumes of approximately 1 cm ${}^3$ for single proton bunches to allow for fast online feedback. Here we present the scintillator-based miniSCIDOM detector for online single-bunch tomographic reconstruction of dose distributions in volumes of up to approximately 1 cm ${}^3$ . The detector achieves a spatial resolution below 500 $\unicode{x3bc}$ m and a sensitivity of 100 mGy. The detector performance is tested at a proton therapy cyclotron and an LPA proton source. The experiments’ primary focus is the characterization of the scintillator’s ionization quenching behaviour. - 1 December 1993
- Published by Springer Nature in Applied Physics A
- Vol. 57 (6) , 517-520
Low-temperature electronic transport behaviour of powder-metallurgical SiGe alloys
- 1 December 1993
- Published by Springer Nature in Applied Physics A
- Vol. 57 (6) , 517-520
Low-temperature electronic transport behaviour of powder-metallurgical SiGe alloys
- 1 December 1993
- Published by Elsevier in Advances in Colloid and Interface Science
- Vol. 46, 185-219
Terrestrial and microgravity studies with nanoconductor networks: basic principles and applications of “huge molecule Van der Waals gases”
- 1 December 1993
- Published by Elsevier in Advances in Colloid and Interface Science
- Vol. 46, 185-219
Terrestrial and microgravity studies with nanoconductor networks: basic principles and applications of “huge molecule Van der Waals gases”