Clément Nevers
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Clément Nevers has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Jan Carmeliet
Chair of Building Physics, Department of Mechanical and Process Engineering, ETH Zürich (Swiss Federal Institute of Technology in Zürich)
7 shared publicationsDominique Derome
Université de Sherbrooke
6 shared publicationsAytaç Kubilay
ETH Zurich
4 shared publications- Aytaç Kubilay
Chair of Building Physics, ETH Zürich, Zürich, Switzerland
4 shared publications - Dominique Derome
Université de Sherbrooke
3 shared publications Dominik Strebel
ETH Zurich
2 shared publications
Latest Publications
- Open Access
- 22 June 2026
- Published by Springer Nature in Research Square
Humidity determines whether trees cool or heat cities
Urban trees are widely promoted as a frontline defense against rising heat stress in cities, yet their net effect on pedestrians remains contested. While shade and tree transpiration can cool the air, the additional humidity may intensify thermal discomfort, leading to conflicting observations across climates. Here we use high-resolution physical modeling across arid, continental, and tropical urban environments to resolve this paradox. We find that trees consistently reduce local heat stress through shading and transpiration cooling, but their downwind nonlocal influence depends strongly on background climate. In arid cities, transpiration enhances cooling and substantially lowers heat stress at a distance, whereas in tropical cities the added humidity amplifies downwind heat stress. Continental climates exhibit intermediate behavior, with local benefits but mixed nonlocal outcomes. These results reveal a climate-dependent transition in the effects of tree-derived moisture advection: from mitigation to amplification of heat stress along a gradient of climate humidity. Our findings show that urban greening is not universally beneficial and that effective heat mitigation interventions require climate-specific, neighborhood-scale planning that accounts for both local cooling and nonlocal atmospheric feedbacks.
- 22 June 2026
- Published by Springer Nature in Research Square
Open AccessHumidity determines whether trees cool or heat cities
Urban trees are widely promoted as a frontline defense against rising heat stress in cities, yet their net effect on pedestrians remains contested. While shade and tree transpiration can cool the air, the additional humidity may intensify thermal discomfort, leading to conflicting observations across climates. Here we use high-resolution physical modeling across arid, continental, and tropical urban environments to resolve this paradox. We find that trees consistently reduce local heat stress through shading and transpiration cooling, but their downwind nonlocal influence depends strongly on background climate. In arid cities, transpiration enhances cooling and substantially lowers heat stress at a distance, whereas in tropical cities the added humidity amplifies downwind heat stress. Continental climates exhibit intermediate behavior, with local benefits but mixed nonlocal outcomes. These results reveal a climate-dependent transition in the effects of tree-derived moisture advection: from mitigation to amplification of heat stress along a gradient of climate humidity. Our findings show that urban greening is not universally beneficial and that effective heat mitigation interventions require climate-specific, neighborhood-scale planning that accounts for both local cooling and nonlocal atmospheric feedbacks.
- Open Access
- 27 May 2026
- Published by Elsevier in Building and Environment
- Vol. 302
A helium-based surrogate method for thermal airflow in an idealized street canyon via CFD simulations
- 27 May 2026
- Published by Elsevier in Building and Environment
- Vol. 302
Open AccessA helium-based surrogate method for thermal airflow in an idealized street canyon via CFD simulations
- Open Access
- 5 March 2026
- Published by Elsevier in SSRN Electronic Journal
How to mitigate urban heat in a hot-dry microclimate using high-resolution approach
Urban neighborhoods in hot-dry climates experience severe heat stress during summer, increasing health risks and outdoor discomfort. This study evaluates the performance of different heat mitigation strategies in a representative neighborhood of Oujda, Morocco, using high-resolution microclimate simulations with the open-source urbanMicroclimateFoam solver, built on OpenFOAM. The model couples airflow, heat and moisture transport, and radiative exchanges to simulate pedestrian-level conditions over a five-day summer period. A parametric analysis is first conducted to compare the cooling effectiveness of increased surface albedo, irrigated grass, trees, and shading fabrics. In a second step, an urban microclimate “storyline” is developed to represent stages in the implementation process over time and to assess the progressive evolution of outdoor thermal comfort. Thermal comfort is evaluated using the Universal Thermal Climate Index (UTCI) at 2 m height. Results show that irrigated trees provide the greatest improvement, lowering UTCI by up to -4°C on average in their vicinity, followed by irrigated grass with up to -2°C reduction and shading fabrics reducing UTCI by -1.5°C, while high-albedo surfaces had negligible effects. The storyline analysis reveals that immediate shading deployment can locally reduce daily heat exposure by 30%, and that replacing artificial shade with trees increases and extends cooling benefits. In the long-term scenario, mature trees achieve up to 50% reduction in cumulative heat exposure compared with current conditions. Under drought stress, non-irrigated trees perform only slightly better than shading fabrics. These results provide quantitative insight into the efficiency and resource trade-offs of heat-mitigation strategies for arid urban environments.
- 5 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHow to mitigate urban heat in a hot-dry microclimate using high-resolution approach
Urban neighborhoods in hot-dry climates experience severe heat stress during summer, increasing health risks and outdoor discomfort. This study evaluates the performance of different heat mitigation strategies in a representative neighborhood of Oujda, Morocco, using high-resolution microclimate simulations with the open-source urbanMicroclimateFoam solver, built on OpenFOAM. The model couples airflow, heat and moisture transport, and radiative exchanges to simulate pedestrian-level conditions over a five-day summer period. A parametric analysis is first conducted to compare the cooling effectiveness of increased surface albedo, irrigated grass, trees, and shading fabrics. In a second step, an urban microclimate “storyline” is developed to represent stages in the implementation process over time and to assess the progressive evolution of outdoor thermal comfort. Thermal comfort is evaluated using the Universal Thermal Climate Index (UTCI) at 2 m height. Results show that irrigated trees provide the greatest improvement, lowering UTCI by up to -4°C on average in their vicinity, followed by irrigated grass with up to -2°C reduction and shading fabrics reducing UTCI by -1.5°C, while high-albedo surfaces had negligible effects. The storyline analysis reveals that immediate shading deployment can locally reduce daily heat exposure by 30%, and that replacing artificial shade with trees increases and extends cooling benefits. In the long-term scenario, mature trees achieve up to 50% reduction in cumulative heat exposure compared with current conditions. Under drought stress, non-irrigated trees perform only slightly better than shading fabrics. These results provide quantitative insight into the efficiency and resource trade-offs of heat-mitigation strategies for arid urban environments.
- Top Cited PapersOpen Access
- 6 January 2026
- Published by Elsevier in Sustainable Cities and Society
- Vol. 137
Heat exposure and cooling efficiency of trees in a tropical hot-humid neighborhood with a park
- 6 January 2026
- Published by Elsevier in Sustainable Cities and Society
- Vol. 137
Top Cited PapersOpen AccessHeat exposure and cooling efficiency of trees in a tropical hot-humid neighborhood with a park
- Open Access
- 16 June 2025
- Published by Elsevier in Building and Environment
- Vol. 282
Understanding cooling potential of urban trees in a typical North America neighborhood
- 16 June 2025
- Published by Elsevier in Building and Environment
- Vol. 282
Open AccessUnderstanding cooling potential of urban trees in a typical North America neighborhood
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Climate-dependent impact of vegetation on thermal comfort in urban neighborhoods through resolved CFD simulations
Given the urban heat island effect and extreme events induced by climate change, studying the urban microclimate and mitigation strategies is essential, particularly to enhance pedestrian thermal comfort.Vegetation has demonstrated its effectiveness in mitigating urban heat at local scale but its effect on thermal comfort has still to be accurately studied across various climates and urban configurations. Vegetation improves pedestrian thermal comfort through shading and evapotranspiration. However, vegetation can deteriorate thermal comfort by increasing the relative humidity and impeding wind flow and nocturnal heat removal.In this study, the urban microclimate is simulated using the high-fidelity CFD model urbanMicroclimateFoam based on OpenFOAM. This solver solves successively turbulent air flow, heat and moisture transport in solid materials, and radiation exchanges. Environmental boundary conditions are dynamically downscaled from Weather Research and Forecasting (WRF) mesoscale results. The impact of vegetation is analyzed across three distinct climates: a continental climate in Montreal, Canada, a tropical climate in Singapore, and an arid climate in Morocco. Trees yield local improvements in all three cases, while the highest cooling potential is observed for the arid climate context. Conversely, in tropical climate, vegetation air cooling is offset by the increase in humidity, resulting in a reduced thermal comfort impact. On a daytime average, vegetation in Montreal reduces UTCI locally by up to 6°C, with a non-local adverse heating effect of 2°C. In Singapore, the local cooling effect evaluated reaches 5°C UTCI, with non-local increases up to 3°C, while in Morocco, vegetation achieves a local improvement of UTCI by 7°C, with non-local adverse effects limited to 1°C. The primary factor contributing to pedestrian thermal comfort improvement in all climates is shading provided by trees.Urban planners and stakeholders can integrate such valuable insights to harness the benefits and challenges of vegetation across diverse climatic contexts.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessClimate-dependent impact of vegetation on thermal comfort in urban neighborhoods through resolved CFD simulations
Given the urban heat island effect and extreme events induced by climate change, studying the urban microclimate and mitigation strategies is essential, particularly to enhance pedestrian thermal comfort.Vegetation has demonstrated its effectiveness in mitigating urban heat at local scale but its effect on thermal comfort has still to be accurately studied across various climates and urban configurations. Vegetation improves pedestrian thermal comfort through shading and evapotranspiration. However, vegetation can deteriorate thermal comfort by increasing the relative humidity and impeding wind flow and nocturnal heat removal.In this study, the urban microclimate is simulated using the high-fidelity CFD model urbanMicroclimateFoam based on OpenFOAM. This solver solves successively turbulent air flow, heat and moisture transport in solid materials, and radiation exchanges. Environmental boundary conditions are dynamically downscaled from Weather Research and Forecasting (WRF) mesoscale results. The impact of vegetation is analyzed across three distinct climates: a continental climate in Montreal, Canada, a tropical climate in Singapore, and an arid climate in Morocco. Trees yield local improvements in all three cases, while the highest cooling potential is observed for the arid climate context. Conversely, in tropical climate, vegetation air cooling is offset by the increase in humidity, resulting in a reduced thermal comfort impact. On a daytime average, vegetation in Montreal reduces UTCI locally by up to 6°C, with a non-local adverse heating effect of 2°C. In Singapore, the local cooling effect evaluated reaches 5°C UTCI, with non-local increases up to 3°C, while in Morocco, vegetation achieves a local improvement of UTCI by 7°C, with non-local adverse effects limited to 1°C. The primary factor contributing to pedestrian thermal comfort improvement in all climates is shading provided by trees.Urban planners and stakeholders can integrate such valuable insights to harness the benefits and challenges of vegetation across diverse climatic contexts.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Assessment of heat exposure and cooling efficiency by trees in urban microclimate analysis
The urban microclimate model, urbanMicroclimateFoam developed by the authors, is used to simulate pedestrian thermal comfort in an urban park and adjacent building neighborhood in tropical Singapore during a hot and humid period. The thermal comfort is assessed using the Universal Thermal Climate Index (UTCI) which depends on air temperature, relative humidity, wind speed and mean radiant temperature.Heat exposure of pedestrians is defined as the accumulated UTCI above a given threshold for a considered time, referred to as UTCI-degree hours. A weighting factor based on dynamic thermal sensation is introduced to account for higher heat exposure at high UTCI. This approach captures human thermal perception across varying periods, offering a comprehensive assessment of thermal stress. The cooling efficiency of vegetation as a heat mitigation measure is quantified as the ratio of heat exposure between a vegetated configuration and a reference non-vegetated configuration.The study reveals that unshaded areas can experience heat exposure up to 700°C·h, while shaded zones exhibit significantly lower values around 450°C·h over a day. The present neighborhood configuration with trees in the park achieves cooling efficiencies of up to 40% in tree-covered areas. However, the results also highlight non-local effects, where unshaded zones in between the trees can heat up by as much as 25% due to the wind blocking and the increased humidity resultsing from the transpiration by trees. Among individual mitigation strategies, larger, densely placed trees, such as those in parks, are shown to be the most effective in improving cooling efficiency.The study suggests that heat exposure and cooling efficiency metrics should incorporate activity maps to prioritize heat mitigation in high-activity zones while tolerating negative effects in less critical areas, enabling targeted urban cooling solutions.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessAssessment of heat exposure and cooling efficiency by trees in urban microclimate analysis
The urban microclimate model, urbanMicroclimateFoam developed by the authors, is used to simulate pedestrian thermal comfort in an urban park and adjacent building neighborhood in tropical Singapore during a hot and humid period. The thermal comfort is assessed using the Universal Thermal Climate Index (UTCI) which depends on air temperature, relative humidity, wind speed and mean radiant temperature.Heat exposure of pedestrians is defined as the accumulated UTCI above a given threshold for a considered time, referred to as UTCI-degree hours. A weighting factor based on dynamic thermal sensation is introduced to account for higher heat exposure at high UTCI. This approach captures human thermal perception across varying periods, offering a comprehensive assessment of thermal stress. The cooling efficiency of vegetation as a heat mitigation measure is quantified as the ratio of heat exposure between a vegetated configuration and a reference non-vegetated configuration.The study reveals that unshaded areas can experience heat exposure up to 700°C·h, while shaded zones exhibit significantly lower values around 450°C·h over a day. The present neighborhood configuration with trees in the park achieves cooling efficiencies of up to 40% in tree-covered areas. However, the results also highlight non-local effects, where unshaded zones in between the trees can heat up by as much as 25% due to the wind blocking and the increased humidity resultsing from the transpiration by trees. Among individual mitigation strategies, larger, densely placed trees, such as those in parks, are shown to be the most effective in improving cooling efficiency.The study suggests that heat exposure and cooling efficiency metrics should incorporate activity maps to prioritize heat mitigation in high-activity zones while tolerating negative effects in less critical areas, enabling targeted urban cooling solutions.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Mapping local urban climate and ventilation corridors using clustering approach
The urban microclimate model, urbanMicroclimateFoam developed by the authors, is used to simulate thermal comfort in an urban park and adjacent neighborhood in tropical Singapore during a hot humid period. The thermal comfort is analyzed using the Universal Thermal Climate Index (UTCI) which depends on air temperature, relative humidity, wind speed and mean radiant temperature.To better understand the spatial variability of urban microclimate, we apply clustering approach to classify different local climate zones using scaled values of comfort variables as input. In the case study, six clusters are identified, each representing areas with similar local climate characteristics. One key cluster corresponds to the zone shadowed by trees in the park, where UTCI is significantly lower due to tree coverage. However, unshaded zone in between the park trees is also represented in a distinct cluster, where UTCI are higher since they experience lower wind speed and higher relative humidity, due to the wind blocking and transpiration by trees. This effect, in contrast to the local shading by trees, is referred to as nonlocal heating effect by trees. Interestingly, the proposed approach identifies different clusters with different thermal conditions in between the building blocks, with wind speed emerging as the primary differentiating factor. This highlights the importance of wind on thermal comfort in hot-humid context.Using a clustering approach with six variables as input, we were able to detect different wind corridors with a wind speed higher than average. Some of these clusters indicate hot and dry air, or cool and wet air ventilation corridors, which are not easily distinguishable using conventional methods and also unfavorable for thermal comfort improvement. One cluster indicates cool and dry air ventilation, which favors thermal comfort improvement.In conclusion, clustering approach allows to map different urban microclimate patterns and analyze the underlying reasons for the observed thermal comfort.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessMapping local urban climate and ventilation corridors using clustering approach
The urban microclimate model, urbanMicroclimateFoam developed by the authors, is used to simulate thermal comfort in an urban park and adjacent neighborhood in tropical Singapore during a hot humid period. The thermal comfort is analyzed using the Universal Thermal Climate Index (UTCI) which depends on air temperature, relative humidity, wind speed and mean radiant temperature.To better understand the spatial variability of urban microclimate, we apply clustering approach to classify different local climate zones using scaled values of comfort variables as input. In the case study, six clusters are identified, each representing areas with similar local climate characteristics. One key cluster corresponds to the zone shadowed by trees in the park, where UTCI is significantly lower due to tree coverage. However, unshaded zone in between the park trees is also represented in a distinct cluster, where UTCI are higher since they experience lower wind speed and higher relative humidity, due to the wind blocking and transpiration by trees. This effect, in contrast to the local shading by trees, is referred to as nonlocal heating effect by trees. Interestingly, the proposed approach identifies different clusters with different thermal conditions in between the building blocks, with wind speed emerging as the primary differentiating factor. This highlights the importance of wind on thermal comfort in hot-humid context.Using a clustering approach with six variables as input, we were able to detect different wind corridors with a wind speed higher than average. Some of these clusters indicate hot and dry air, or cool and wet air ventilation corridors, which are not easily distinguishable using conventional methods and also unfavorable for thermal comfort improvement. One cluster indicates cool and dry air ventilation, which favors thermal comfort improvement.In conclusion, clustering approach allows to map different urban microclimate patterns and analyze the underlying reasons for the observed thermal comfort.
- Open Access
- 29 July 2024
- Published by Elsevier in Building and Environment
- Vol. 263
CFD simulation of the wind flow under lift-up buildings using a porous approach
- 29 July 2024
- Published by Elsevier in Building and Environment
- Vol. 263
Open AccessCFD simulation of the wind flow under lift-up buildings using a porous approach