Jintao Xue
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jintao Xue has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Binhao Wang
State Key Laboratory of Ultrafast Optical Science and Technology, Xi'an Institute of Optics and Precision Mechanics Chinese Academy of Sciences Xi'an Shaanxi China
3 shared publications - Nan Qi
Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
3 shared publications - Shenlei Bao
State Key Laboratory of Ultrafast Optical Science and Technology, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 710119, China
3 shared publications - Chao Cheng
State Key Laboratory of Ultrafast Optical Science and Technology, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 710119, China
2 shared publications - Jinyi Wu
State Key Laboratory of Transient Optics and Photonics, Xian Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, China
2 shared publications - Wenfu Zhang
State Key Laboratory of Ultrafast Optical Science and Technology, Xi'an Institute of Optics and Precision Mechanics Chinese Academy of Sciences Xi'an Shaanxi China
2 shared publications
Latest Publications
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (10) , 4808-4818
A 64 Gbaud/s Hybrid-Integrated Optical Transmitter Based on a 60 GHz Silicon Photonic Dual-Segment Microring Modulator and a CMOS Driver for High-Bandwidth DWDM Optical I/O
Silicon microring modulators (MRMs) are pivotal for enabling high-bandwidth, power-efficient dense wavelength division multiplexing (DWDM) optical I/O. This paper introduces a dual-segment MRM featuring four N-type and four P-type doping concentrations. By optimizing the doping profiles, the MRM achieves a 43% reduction in loss and a 10% reduction in capacitance, while maintaining comparable modulation efficiency to MRMs with three N-type and three P-type doping concentrations. This design achieves an electro-optic (EO) bandwidth exceeding 60 GHz, marking a 15% increase over its single-segment counterpart. An equivalent circuit model, which aligns excellently with experimental results, demonstrates the co-design capability of electronic and photonic integrated circuits (EPIC). The dual-segment MRM exhibits comparable modulation efficiency to the single-segment MRM, with a measurement of approximately 0.63 V$\cdot$ cm. Both modulators operate successfully at data rates of 106 Gb/s using PAM4. With the ample EO bandwidth, a data rate of 128 Gbaud/s using NRZ is also demonstrated for the dual-segment MRM. For the first time, a 64 Gbaud/s hybrid integrated dual-segment MRM transmitter (TX) is demonstrated, employing a segmented driver with a feed forward equalization (FFE) circuit. This TX is paired with a co-designed 28 nm complementary metal oxide semiconductor (CMOS) driver for DWDM optical I/O, showcasing high bandwidth density and power efficiency.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (10) , 4808-4818
A 64 Gbaud/s Hybrid-Integrated Optical Transmitter Based on a 60 GHz Silicon Photonic Dual-Segment Microring Modulator and a CMOS Driver for High-Bandwidth DWDM Optical I/O
Silicon microring modulators (MRMs) are pivotal for enabling high-bandwidth, power-efficient dense wavelength division multiplexing (DWDM) optical I/O. This paper introduces a dual-segment MRM featuring four N-type and four P-type doping concentrations. By optimizing the doping profiles, the MRM achieves a 43% reduction in loss and a 10% reduction in capacitance, while maintaining comparable modulation efficiency to MRMs with three N-type and three P-type doping concentrations. This design achieves an electro-optic (EO) bandwidth exceeding 60 GHz, marking a 15% increase over its single-segment counterpart. An equivalent circuit model, which aligns excellently with experimental results, demonstrates the co-design capability of electronic and photonic integrated circuits (EPIC). The dual-segment MRM exhibits comparable modulation efficiency to the single-segment MRM, with a measurement of approximately 0.63 V$\cdot$ cm. Both modulators operate successfully at data rates of 106 Gb/s using PAM4. With the ample EO bandwidth, a data rate of 128 Gbaud/s using NRZ is also demonstrated for the dual-segment MRM. For the first time, a 64 Gbaud/s hybrid integrated dual-segment MRM transmitter (TX) is demonstrated, employing a segmented driver with a feed forward equalization (FFE) circuit. This TX is paired with a co-designed 28 nm complementary metal oxide semiconductor (CMOS) driver for DWDM optical I/O, showcasing high bandwidth density and power efficiency.
- 16 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (17) , 6028-6035
A 4×112 Gb/s Ultra-Compact Polarization-Insensitive Silicon Photonics WDM Receiver With CMOS TIA for Co-Packaged Optics and Optical I/O
We present a four-channel polarization-insensitive silicon photonic (SiPh) wavelength division multiplexing (WDM) receiver, incorporating a polarization splitting grating coupler, dual-ring filters and bidirectional photodiodes. This design achieves an ultra-compact footprint of 1 mm × 0.2 mm with a polarization dependent loss (PDL) of 0.58 dB or less. Four clearly open eye diagrams at a data rate of 112 Gb/s PAM4 are obtained. Furthermore, we demonstrate the hybrid integration of the SiPh chip with a 28 nm CMOS transimpedence amplifier (TIA), resulting in an impressive energy efficiency of 1.34 pJ/bit at a data rate of 100 Gb/s PAM4. Sensitivities of −13.4 dBm and -5.6 dBm are achieved at data rates of 50 Gb/s NRZ and 100 Gb/s PAM4, respectively, under KP4 forward error correction (FEC) threshold.
- 16 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (17) , 6028-6035
A 4×112 Gb/s Ultra-Compact Polarization-Insensitive Silicon Photonics WDM Receiver With CMOS TIA for Co-Packaged Optics and Optical I/O
We present a four-channel polarization-insensitive silicon photonic (SiPh) wavelength division multiplexing (WDM) receiver, incorporating a polarization splitting grating coupler, dual-ring filters and bidirectional photodiodes. This design achieves an ultra-compact footprint of 1 mm × 0.2 mm with a polarization dependent loss (PDL) of 0.58 dB or less. Four clearly open eye diagrams at a data rate of 112 Gb/s PAM4 are obtained. Furthermore, we demonstrate the hybrid integration of the SiPh chip with a 28 nm CMOS transimpedence amplifier (TIA), resulting in an impressive energy efficiency of 1.34 pJ/bit at a data rate of 100 Gb/s PAM4. Sensitivities of −13.4 dBm and -5.6 dBm are achieved at data rates of 50 Gb/s NRZ and 100 Gb/s PAM4, respectively, under KP4 forward error correction (FEC) threshold.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (14) , 4924-4932
A Comprehensive Equivalent Circuit Model of Silicon Microring Modulators for Photonics-Electronics Codesign
Silicon microring modulators have huge potential for applications in co-packaged optics (CPO) and optical I/O (OIO) owing to the superior bandwidth, small footprint, and inherent wavelength multiplexing characteristics. To enable efficient and robust optical transceiver systems, codesign and cosimulation environments are essential for optimization of photonic devices, transceiver circuitry and electronic-photonic integrated circuits (EPIC). We introduce a comprehensive equivalent circuit model for single- and dual-segment silicon microring modulators (MRMs), which accurately capture the device behavior during high-speed modulation. This model includes electrical parasitics, nonlinear optical steady state and dynamics, and thermo-optic effects. Model parameters are extracted by curve fitting MRM optical transmission spectrum and small signal characteristics. The simulated eye diagrams exhibit excellent alignment with the measured eye diagrams at data rates of 80Gb/s and 106Gb/s. A cosimulation environment with a MRM driver in 28nm CMOS and a MRM in 130nm silicon photonics is demonstrated on an electronics design automation (EDA) platform. An optical eye diagram at a data rate of 212Gb/s PAM8 is successfully achieved by optimizing the driver equalizer and the MRM two segment ratio. Then an EPIC with photonics-electronics closedloop feedback control algorithm is demonstrated, achieving a significantly larger eye opening after thermal tuning, thanks to the accurate equivalent circuit model of the MRM.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (14) , 4924-4932
A Comprehensive Equivalent Circuit Model of Silicon Microring Modulators for Photonics-Electronics Codesign
Silicon microring modulators have huge potential for applications in co-packaged optics (CPO) and optical I/O (OIO) owing to the superior bandwidth, small footprint, and inherent wavelength multiplexing characteristics. To enable efficient and robust optical transceiver systems, codesign and cosimulation environments are essential for optimization of photonic devices, transceiver circuitry and electronic-photonic integrated circuits (EPIC). We introduce a comprehensive equivalent circuit model for single- and dual-segment silicon microring modulators (MRMs), which accurately capture the device behavior during high-speed modulation. This model includes electrical parasitics, nonlinear optical steady state and dynamics, and thermo-optic effects. Model parameters are extracted by curve fitting MRM optical transmission spectrum and small signal characteristics. The simulated eye diagrams exhibit excellent alignment with the measured eye diagrams at data rates of 80Gb/s and 106Gb/s. A cosimulation environment with a MRM driver in 28nm CMOS and a MRM in 130nm silicon photonics is demonstrated on an electronics design automation (EDA) platform. An optical eye diagram at a data rate of 212Gb/s PAM8 is successfully achieved by optimizing the driver equalizer and the MRM two segment ratio. Then an EPIC with photonics-electronics closedloop feedback control algorithm is demonstrated, achieving a significantly larger eye opening after thermal tuning, thanks to the accurate equivalent circuit model of the MRM.