CCChao Cheng

Chao Cheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chao Cheng has a total of 24 co-authors. Here are the top co-authors by number of shared publications:

  • Binhao Wang

    State Key Laboratory of Ultrafast Optical Science and Technology, Xi'an Institute of Optics and Precision Mechanics Chinese Academy of Sciences Xi'an Shaanxi China

    6 shared publications
  • Wenfu Zhang

    State Key Laboratory of Ultrafast Optical Science and Technology, Xi'an Institute of Optics and Precision Mechanics Chinese Academy of Sciences Xi'an Shaanxi China

    4 shared publications
  • Shenlei Bao

    State Key Laboratory of Ultrafast Optical Science and Technology, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 710119, China

    3 shared publications
  • Jintao Xue

    State Key Laboratory of Ultrafast Optical Science and Technology, Xi'an Institute of Optics and Precision Mechanics Chinese Academy of Sciences Xi'an Shaanxi China

    2 shared publications
  • Jintao Xue

    State Key Laboratory of Ultrafast Optical Science and Technology, Xian Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xian, China

    2 shared publications
  • Jintao Xue

    State Key Laboratory of Ultrafast Optical Science and Technology, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 710119, China

    2 shared publications

Latest Publications

  • An 8 × 224 Gbps Thermally Stabilized Quantum‐Dot Mode‐Locked Laser Driven DWDM Microring Transmitter for Co‐Packaged Optics and Optical I/O Applications

    by Xianglin Bu, Shujie Pan, Jintao Xue, Shenlei Bao, Chao Cheng, Junjie Yang, Wenfu Zhang, Siming Chen, Binhao Wang

    The rapid growth of artificial intelligence (AI) drives increasing demands for bandwidth density and energy efficiency in data center interconnects. Co‐packaged optics (CPO) based on dense wavelength division multiplexing (DWDM) and microring modulators (MRMs) provides a promising solution for next‐generation optical interconnects. However, its practical deployment is limited by the lack of suitable multi‐wavelength sources and thermal instability of MRM arrays. Here, we propose an integrated DWDM transmitter architecture that achieves three key advances in high per‐channel data rate, large‐scale transmission capacity, and stable low‐crosstalk operation. The architecture combines a quantum‐dot (QD) mode‐locked laser frequency comb as a high‐quality multi‐wavelength source with a high‐bandwidth DWDM MRM array. A parallel thermal control strategy, which simplifies the locking process, enables fast simultaneous wavelength locking during system operation and suppresses inter‐channel crosstalk, achieving a 10× reduction in locking time. Experimentally, we demonstrate 8 × 224 Gbps PAM4 transmission over a single fiber. This work demonstrates the first O‐band silicon DWDM transmitter driven by a 200 GHz‐spaced QD optical frequency comb, achieving a per‐channel data rate exceeding 200 Gbps with high bandwidth density and energy efficiency, providing a promising pathway toward future CPO and optical I/O (OIO) systems.

  • Open Access

    High-speed Si-Ge avalanche photodiode with a gain-bandwidth product of 7564 GHz

    by Jintao Xue, Chao Cheng, Shenlei Bao, Qian Liu, Wenfu Zhang, Binhao Wang

    Avalanche photodetectors are renowned for their exceptional sensitivity and high gain-bandwidth product, making them highly promising for optical communications, quantum technologies, LiDAR, and biosensing. This paper presents a lateral separate absorption charge multiplication silicon-germanium avalanche photodiode designed for O-band operation. The electric field distribution was strategically designed to minimize dark current and enhance gain. A tapered input waveguide and a distributed Bragg reflector were integrated to improve responsivity. The device achieves a dark current of only 8.4 μA at 12.5 V reverse bias with an input optical power of −24 dBm and demonstrates a record-high gain-bandwidth product of 7564 GHz. High-speed eye diagram measurements confirm its support for 100 Gbps NRZ and 200 Gbps PAM4 signals, with sensitivities of −17.1 dBm and −9.6 dBm, respectively. Eye diagram validation at 200 Gbps PAM4 was also conducted across eight avalanche photodiodes aligned with an eight-channel dense wavelength division multiplexing system.


  • Open Access

    A Low-Noise Hybrid-Integrated Balanced Homodyne Receiver with 2.5 GHz Bandwidth and 15 dB Quantum Shot Noise Clearance

    by Yihao Yang, Chao Cheng, Ruixuan Yang, Yangming Ren, Shenlei Bao, Jintao Xue, Houyou Lai, Binhao Wang

    The rapid development of continuous-variable quantum communication has driven an increasing demand for high-performance quantum signal processing modules. Among these, the balanced homodyne detector (BHD) has emerged as a leading solution for practical quantum state measurement due to its capability to provide complete quantum mechanical characterization. However, its performance is often constrained by limited bandwidth and high noise levels, primarily due to the reliance on bulk optical components and discrete receiver electronics. The dominant noise source in these systems typically stems from electronic noise, while imbalances in the optical path further degrade the signal-to-noise ratio (SNR) of the BHD. In this work, we present an adjustable integrated optical path to enhance the balance within the BHD system, along with a low-noise transimpedance amplifier (TIA) by employing optoelectronic co-design. Our design achieves a bandwidth of 2.5 GHz, an input-referred noise current of only 2 pA/√Hz in 180 nm CMOS technology, and a measured quantum shot noise clearance of 15 dB generated from a 700 μA photocurrent. This is the maximum quantum shot noise clearance at the same BHD photocurrent reported to date above the GHz bandwidth.

  • Open Access

    A Three-Terminal Si-Ge Avalanche Photodiode with a Breakdown Voltage of 6.8 V and a Gain Bandwidth Product of 1377 GHz

    by Chao Cheng, Jintao Xue, Xishan Yu, Jifang Mu, Binhao Wang

    Silicon–germanium (Si-Ge) avalanche photodiodes (APDs), fully compatible with complementary metal–oxide–semiconductor (CMOS) processes, are critical devices for high-speed optical communication. In this work, we propose a three-terminal Si-Ge APD on a silicon-on-insulator (SOI) substrate based on device simulation studies. The proposed APD employs a separate absorption and multiplication structure, achieving an ultra-low breakdown voltage of 6.8 V. The device operates in the O-band, with optical signals laterally coupled into the Ge absorption layer via a silicon nitride (Si3N4) waveguide. At a bias of 2 V, the APD exhibits a responsivity of 0.85 A/W; under a bias of 6.6 V, it achieves a 3-dB optoelectronic (OE) bandwidth of 51 GHz, a direct current gain of 27, and a maximum gain–bandwidth product (GBP) of 1377 GHz. High-speed performance is further confirmed through eye-diagram simulations at 100 Gbps non-return-to-zero (NRZ) and 200 Gbps four-level pulse amplitude modulation (PAM4). These results clearly show the strong potential of the proposed APD for optical communication and interconnect applications under stringent power and supply voltage constraints.

  • A 64 Gbaud/s Hybrid-Integrated Optical Transmitter Based on a 60 GHz Silicon Photonic Dual-Segment Microring Modulator and a CMOS Driver for High-Bandwidth DWDM Optical I/O

    by Jintao Xue, Binhao Wang, Siyuan Ma, Shenlei Bao, Qianli Ma, Chao Cheng, Nan Qi, Wenfu Zhang

    Silicon microring modulators (MRMs) are pivotal for enabling high-bandwidth, power-efficient dense wavelength division multiplexing (DWDM) optical I/O. This paper introduces a dual-segment MRM featuring four N-type and four P-type doping concentrations. By optimizing the doping profiles, the MRM achieves a 43% reduction in loss and a 10% reduction in capacitance, while maintaining comparable modulation efficiency to MRMs with three N-type and three P-type doping concentrations. This design achieves an electro-optic (EO) bandwidth exceeding 60 GHz, marking a 15% increase over its single-segment counterpart. An equivalent circuit model, which aligns excellently with experimental results, demonstrates the co-design capability of electronic and photonic integrated circuits (EPIC). The dual-segment MRM exhibits comparable modulation efficiency to the single-segment MRM, with a measurement of approximately 0.63 V$\cdot$ cm. Both modulators operate successfully at data rates of 106 Gb/s using PAM4. With the ample EO bandwidth, a data rate of 128 Gbaud/s using NRZ is also demonstrated for the dual-segment MRM. For the first time, a 64 Gbaud/s hybrid integrated dual-segment MRM transmitter (TX) is demonstrated, employing a segmented driver with a feed forward equalization (FFE) circuit. This TX is paired with a co-designed 28 nm complementary metal oxide semiconductor (CMOS) driver for DWDM optical I/O, showcasing high bandwidth density and power efficiency.


  • A 4×112 Gb/s Ultra-Compact Polarization-Insensitive Silicon Photonics WDM Receiver With CMOS TIA for Co-Packaged Optics and Optical I/O

    by Jintao Xue, Binhao Wang, Yihan Chen, Sikai Chen, Jinyi Wu, Chao Cheng, Shenlei Bao, Nan Qi, Wenfu Zhang

    We present a four-channel polarization-insensitive silicon photonic (SiPh) wavelength division multiplexing (WDM) receiver, incorporating a polarization splitting grating coupler, dual-ring filters and bidirectional photodiodes. This design achieves an ultra-compact footprint of 1 mm × 0.2 mm with a polarization dependent loss (PDL) of 0.58 dB or less. Four clearly open eye diagrams at a data rate of 112 Gb/s PAM4 are obtained. Furthermore, we demonstrate the hybrid integration of the SiPh chip with a 28 nm CMOS transimpedence amplifier (TIA), resulting in an impressive energy efficiency of 1.34 pJ/bit at a data rate of 100 Gb/s PAM4. Sensitivities of −13.4 dBm and -5.6 dBm are achieved at data rates of 50 Gb/s NRZ and 100 Gb/s PAM4, respectively, under KP4 forward error correction (FEC) threshold.