Timur O. Zinchenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Timur O. Zinchenko has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Ekaterina A. Pecherskaya
Penza State University
18 shared publications Penza State University
8 shared publications- Vladimir S. Aleksandrov
Penza State University
4 shared publications - Dmitriy Artamonov
Penza State University,Penza,Russia
3 shared publications - Aleksandr A. Danilov
Penza Center for Standardization, Metrology, and Certification (Pensa TsSM)
2 shared publications - Anatoly Dmitrievich Semenov
Penza State University
2 shared publications
Latest Publications
- 13 October 2025
- Published by Ulyanovsk State Technical University
INVESTIGATION OF SIZE EFFECTS IN OPTICAL PROPERTIES OF NANOSTRUCTURED SnO₂:Sb THIN FILMS
The size effects in optical properties of nanostructured SnO₂:Sb films deposited by spray pyrolysis (thickness range: 211–262 nm) were investigated. It was found that reducing film thickness induces an increase in the bandgap from 3.62 to 3.84 eV due to quantum confinement effects, along with a linear rise in refractive index and modifications in absorption coefficient. These results demonstrate the feasibility of tuning the optoelectronic properties of the films through thickness variation, offering promising pathways for developing efficient transparent conductive electrodes.
- 13 October 2025
- Published by Ulyanovsk State Technical University
INVESTIGATION OF SIZE EFFECTS IN OPTICAL PROPERTIES OF NANOSTRUCTURED SnO₂:Sb THIN FILMS
The size effects in optical properties of nanostructured SnO₂:Sb films deposited by spray pyrolysis (thickness range: 211–262 nm) were investigated. It was found that reducing film thickness induces an increase in the bandgap from 3.62 to 3.84 eV due to quantum confinement effects, along with a linear rise in refractive index and modifications in absorption coefficient. These results demonstrate the feasibility of tuning the optoelectronic properties of the films through thickness variation, offering promising pathways for developing efficient transparent conductive electrodes.
- 13 October 2025
- Published by Ulyanovsk State Technical University
CURRENT STATUS AND DEVELOPMENT PROSPECTS OF SPRAY PYROLYSIS TECHNOLOGY FOR TRANSPARENT CONDUCTIVE OXIDE PRODUCTION
This paper reviews the current state of spray pyrolysis technology for depositing transparent conductive oxide (TCO) thin films. The analysis focuses on the method's advantages, key process parameters, and promising development directions for industrial applications in modern electronics.
- 13 October 2025
- Published by Ulyanovsk State Technical University
CURRENT STATUS AND DEVELOPMENT PROSPECTS OF SPRAY PYROLYSIS TECHNOLOGY FOR TRANSPARENT CONDUCTIVE OXIDE PRODUCTION
This paper reviews the current state of spray pyrolysis technology for depositing transparent conductive oxide (TCO) thin films. The analysis focuses on the method's advantages, key process parameters, and promising development directions for industrial applications in modern electronics.
- 13 October 2025
- Published by Ulyanovsk State Technical University
SIZE EFFECTS IN OPTOELECTRONIC PROPERTIES OF OXIDE NANOSTRUCTURES
The study investigates size effects in optical and electronic properties of oxide nanostructures. The research demonstrates the impact of quantum confinement on bandgap width, luminescent characteristics, and electrical conductivity of metal oxide nanomaterials.
- 13 October 2025
- Published by Ulyanovsk State Technical University
SIZE EFFECTS IN OPTOELECTRONIC PROPERTIES OF OXIDE NANOSTRUCTURES
The study investigates size effects in optical and electronic properties of oxide nanostructures. The research demonstrates the impact of quantum confinement on bandgap width, luminescent characteristics, and electrical conductivity of metal oxide nanomaterials.
- 1 January 2025
- Published by Penza State University in Measuring. Monitoring. Management. Control
- No. 3
THE EFFECT OF SB DOPING ON CRYSTAL STRUCTURE AND THE Sn4⁺ → Sb5⁺ SUBSTITUTION MODEL WITH OXYGEN DEFECT FORMATION
Background. Transparent conducting oxides (TCOs) are key functional materials for modern optoelectronic devices, including touch screens, solar cells, and light-emitting diodes. Antimony-doped tin dioxide (SnO2:Sb) is of particular interest as an alternative to the more expensive indium tin oxide (ITO) due to its high thermal and chemical stability, as well as the availability of raw materials. However, the mechanisms of Sb incorporation into the SnO2 crystal lattice and its influence on electrical and optical properties remain insufficiently studied. The objective of this research is a theoretical and experimental investigation of the substitution processes of tin atoms with antimony atoms in different oxidation states (Sb3⁺ and Sb5⁺) and the determination of optimal synthesis conditions for producing TCOs with improved characteristics. Materials and methods. Thin SnO2:Sb films were deposited using spray pyrolysis from precursor solutions of SnCl4·5H2O and SbCl3 in a mixture of ethanol and deionized water at a substrate temperature of 450 °C. The antimony concentration was varied from 0 to 10 at. %. To improve crystallinity and activate dopants, the samples were thermally annealed at 600 °C for 1 hour. The structural, electrical, and optical properties of the films were studied using a comprehensive set of advanced techniques, including surface resistance, charge carrier mobility and concentration, as well as transmission, refraction, and absorption coefficients. Results. It was found that at an optimal antimony concentration (3–5 at. %) and properly selected synthesis conditions, Sn4⁺ is predominantly substituted by Sb5⁺, leading to donor doping and a significant improvement in conductivity while maintaining high transparency in the visible range (80–90 %). At Sb concentrations above 5 at. %, the formation of compensating defects and phase segregation was observed, resulting in degraded electrical properties. Thermal annealing enhanced crystallinity, reduced defect concentration, and activated Sb dopants, leading to a decrease in resistivity from 10⁻2–10⁻3 Ω·cm to 10⁻3–10⁻4 Ω·cm. Conclusion. This study established fundamental mechanisms of antimony incorporation into the SnO2 crystal lattice and optimized spray pyrolysis synthesis parameters for producing high-quality SnO2:Sb-based TCOs. The developed material exhibits a combination of high transparency, good conductivity, and thermal stability, making it promising for various optoelectronic applications, including solar cells and touch screens. The use of cost-effective and environmentally friendly materials promotes sustainable technological development and reduces reliance on rare and expensive elements.
- 1 January 2025
- Published by Penza State University in Measuring. Monitoring. Management. Control
- No. 3
THE EFFECT OF SB DOPING ON CRYSTAL STRUCTURE AND THE Sn4⁺ → Sb5⁺ SUBSTITUTION MODEL WITH OXYGEN DEFECT FORMATION
Background. Transparent conducting oxides (TCOs) are key functional materials for modern optoelectronic devices, including touch screens, solar cells, and light-emitting diodes. Antimony-doped tin dioxide (SnO2:Sb) is of particular interest as an alternative to the more expensive indium tin oxide (ITO) due to its high thermal and chemical stability, as well as the availability of raw materials. However, the mechanisms of Sb incorporation into the SnO2 crystal lattice and its influence on electrical and optical properties remain insufficiently studied. The objective of this research is a theoretical and experimental investigation of the substitution processes of tin atoms with antimony atoms in different oxidation states (Sb3⁺ and Sb5⁺) and the determination of optimal synthesis conditions for producing TCOs with improved characteristics. Materials and methods. Thin SnO2:Sb films were deposited using spray pyrolysis from precursor solutions of SnCl4·5H2O and SbCl3 in a mixture of ethanol and deionized water at a substrate temperature of 450 °C. The antimony concentration was varied from 0 to 10 at. %. To improve crystallinity and activate dopants, the samples were thermally annealed at 600 °C for 1 hour. The structural, electrical, and optical properties of the films were studied using a comprehensive set of advanced techniques, including surface resistance, charge carrier mobility and concentration, as well as transmission, refraction, and absorption coefficients. Results. It was found that at an optimal antimony concentration (3–5 at. %) and properly selected synthesis conditions, Sn4⁺ is predominantly substituted by Sb5⁺, leading to donor doping and a significant improvement in conductivity while maintaining high transparency in the visible range (80–90 %). At Sb concentrations above 5 at. %, the formation of compensating defects and phase segregation was observed, resulting in degraded electrical properties. Thermal annealing enhanced crystallinity, reduced defect concentration, and activated Sb dopants, leading to a decrease in resistivity from 10⁻2–10⁻3 Ω·cm to 10⁻3–10⁻4 Ω·cm. Conclusion. This study established fundamental mechanisms of antimony incorporation into the SnO2 crystal lattice and optimized spray pyrolysis synthesis parameters for producing high-quality SnO2:Sb-based TCOs. The developed material exhibits a combination of high transparency, good conductivity, and thermal stability, making it promising for various optoelectronic applications, including solar cells and touch screens. The use of cost-effective and environmentally friendly materials promotes sustainable technological development and reduces reliance on rare and expensive elements.
- 1 January 2025
- Published by Penza State University in Measuring. Monitoring. Management. Control
- No. 2
TRANSPARENT CONDUCTIVE OXIDES BASED ON NON-DEFICIT MATERIALS
Background. Transparent conducting oxides (TCOs) are an important class of materials widely used in modern technologies, including solar cells, displays, and touch devices. However, the traditionally used tin-doped indium oxide (ITO) faces a number of problems, such as high cost, limited indium reserves, and environmental risks of its mining. In this regard, an urgent task is to search for alternative materials with similar characteristics, but at the same time more accessible and environmentally friendly. The purpose of this study is to develop and study alternative TCOs based on abundant and affordable materials, such as zinc oxide (AZO) and tin oxide (FTO), obtained by spray pyrolysis. Materials and methods. Spray pyrolysis was used to synthesize TCOs, which allows the formation of thin films with high homogeneity and good performance characteristics. Solutions of metal salts, such as zinc, tin, and aluminum acetates and nitrates, were used as precursors. The substrate temperature was varied from 300 to 500 °C to optimize the crystalline structure of the films. Results. The obtained AZO (aluminum-doped zinc oxide) coatings showed high transparency (> 90 %) in the visible range, specific resistance of ~10⁻3 Ω cm, stability at temperatures up to 450 °C.; FTO (fluorinedoped tin dioxide) – transparency of ~80 %, specific resistance of ~10⁻3–10⁻2 Ω cm, high thermal stability (up to 600 °C). Alternative materials demonstrated comparable optical properties with ITO (indium oxide doped with tin), while AZO showed lower cost and environmental safety, and FTO – better thermal stability. Conclusion. The study confirmed the possibility of using AZO and FTO as alternative TPOs with acceptable electrical and optical characteristics. AZO has demonstrated high transparency and low resistivity, making it a promising material for flexible electronics. FTO has demonstrated high thermal stability, making it a preferred choice for solar cells and other energy-efficient technologies. The use of these materials will reduce dependence on indium, reduce environmental impact, and ensure sustainable development of technologies.
- 1 January 2025
- Published by Penza State University in Measuring. Monitoring. Management. Control
- No. 2
TRANSPARENT CONDUCTIVE OXIDES BASED ON NON-DEFICIT MATERIALS
Background. Transparent conducting oxides (TCOs) are an important class of materials widely used in modern technologies, including solar cells, displays, and touch devices. However, the traditionally used tin-doped indium oxide (ITO) faces a number of problems, such as high cost, limited indium reserves, and environmental risks of its mining. In this regard, an urgent task is to search for alternative materials with similar characteristics, but at the same time more accessible and environmentally friendly. The purpose of this study is to develop and study alternative TCOs based on abundant and affordable materials, such as zinc oxide (AZO) and tin oxide (FTO), obtained by spray pyrolysis. Materials and methods. Spray pyrolysis was used to synthesize TCOs, which allows the formation of thin films with high homogeneity and good performance characteristics. Solutions of metal salts, such as zinc, tin, and aluminum acetates and nitrates, were used as precursors. The substrate temperature was varied from 300 to 500 °C to optimize the crystalline structure of the films. Results. The obtained AZO (aluminum-doped zinc oxide) coatings showed high transparency (> 90 %) in the visible range, specific resistance of ~10⁻3 Ω cm, stability at temperatures up to 450 °C.; FTO (fluorinedoped tin dioxide) – transparency of ~80 %, specific resistance of ~10⁻3–10⁻2 Ω cm, high thermal stability (up to 600 °C). Alternative materials demonstrated comparable optical properties with ITO (indium oxide doped with tin), while AZO showed lower cost and environmental safety, and FTO – better thermal stability. Conclusion. The study confirmed the possibility of using AZO and FTO as alternative TPOs with acceptable electrical and optical characteristics. AZO has demonstrated high transparency and low resistivity, making it a promising material for flexible electronics. FTO has demonstrated high thermal stability, making it a preferred choice for solar cells and other energy-efficient technologies. The use of these materials will reduce dependence on indium, reduce environmental impact, and ensure sustainable development of technologies.
- 1 January 2025
- Published by Penza State University in Measuring. Monitoring. Management. Control
- No. 2
A DEVICE FOR MEASURING THE SURFACE RESISTANCE OF TRANSPARENT CONDUCTIVE OXIDES BY THE FOUR-PROBE METHOD
Background. Transparent conducting oxides, such as indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO), are essential materials for various electronic applications, including solar cells, displays, and sensors. Accurate measurement of their surface resistance is critical for evaluating the quality and performance of such materials. However, existing measurement methods have limitations in terms of accuracy and versatility. The four-probe method, known for its high precision, is an effective approach for these measurements. The objectives of this study are to develop and investigate a device for measuring the surface resistance of TCOs using the four-probe method. The device must provide high measurement accuracy, flexibility in probe configuration adjustments, and integration with a PC to automate the measurement process and data collection. Materials and Methods. The device was developed using platinum probes, adjustable micro-drives for probe positioning, a stabilized DC power source, and high-sensitivity amplifiers. The probe configuration uses a triangular arrangement, which can be adapted for various types of samples. Calibration was performed using reference samples, and measurement accuracy was verified on real materials. The software includes an STM32 microcontroller and a PC interface implemented in Python. Results. The device demonstrated high measurement accuracy (±1 %) within the range of 10 Ω/ to 10 kΩ/ and was successfully tested on ITO and AZO samples. The triangular probe configuration enabled precise resistance measurements on non-uniform materials. The software provides a userfriendly interface for data visualization and analysis. Conclusions. The developed device meets the stated requirements and can be used for quality control of TCOs in various applications requiring precise surface resistance measurements. The software component facilitates seamless integration into workflows, automating data collection and processing. Future improvements may include enhancing user convenience and expanding device functionality.
- 1 January 2025
- Published by Penza State University in Measuring. Monitoring. Management. Control
- No. 2
A DEVICE FOR MEASURING THE SURFACE RESISTANCE OF TRANSPARENT CONDUCTIVE OXIDES BY THE FOUR-PROBE METHOD
Background. Transparent conducting oxides, such as indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO), are essential materials for various electronic applications, including solar cells, displays, and sensors. Accurate measurement of their surface resistance is critical for evaluating the quality and performance of such materials. However, existing measurement methods have limitations in terms of accuracy and versatility. The four-probe method, known for its high precision, is an effective approach for these measurements. The objectives of this study are to develop and investigate a device for measuring the surface resistance of TCOs using the four-probe method. The device must provide high measurement accuracy, flexibility in probe configuration adjustments, and integration with a PC to automate the measurement process and data collection. Materials and Methods. The device was developed using platinum probes, adjustable micro-drives for probe positioning, a stabilized DC power source, and high-sensitivity amplifiers. The probe configuration uses a triangular arrangement, which can be adapted for various types of samples. Calibration was performed using reference samples, and measurement accuracy was verified on real materials. The software includes an STM32 microcontroller and a PC interface implemented in Python. Results. The device demonstrated high measurement accuracy (±1 %) within the range of 10 Ω/ to 10 kΩ/ and was successfully tested on ITO and AZO samples. The triangular probe configuration enabled precise resistance measurements on non-uniform materials. The software provides a userfriendly interface for data visualization and analysis. Conclusions. The developed device meets the stated requirements and can be used for quality control of TCOs in various applications requiring precise surface resistance measurements. The software component facilitates seamless integration into workflows, automating data collection and processing. Future improvements may include enhancing user convenience and expanding device functionality.
- 1 January 2025
- Published by Penza State University in University proceedings. Volga region. Physical and mathematical sciences
- No. 3
Analysis of relaxation time dependences on influencing factors in conducting oxides based on SnO2:Sb
Background. Transparent conducting oxides (TCOs) based on SnO₂:Sb are promising materials for transparent electrodes in optoelectronic devices. Understanding the mechanisms of charge carrier conductivity and relaxation in these materials is crucial for optimizing their electrophysical properties. The purpose of this work is to analyze experimental data on the dependence of relaxation time on electron concentration, conductivity, and mobility in SnO₂:Sb using various interpolation and approximation methods, as well as to compare the obtained results with the Drude theory. Materials and methods. The study utilized experimental data on electron concentration (n), conductivity (σ), mobility (μ), and relaxation time (τ) for SnO₂:Sb samples. Three interpolation methods were applied for data processing: linear interpolation, Akima interpolation, and cubic spline. Approximation was performed using the least squares method with first-degree polynomials. The analysis accounted for the logarithmic nature of the dependencies for electron concentration and conductivity. Results. A comparative analysis of interpolation methods was conducted for three dependencies. It was found that the dependence of relaxation time on mobility is well described by linear interpolation, consistent with the Drude theory. For other relaxation time dependencies, Akima interpolation proved most suitable due to its ability to handle nonlinear trends. Cubic spline exhibited oscillations in regions with abrupt data changes. The results align with theoretical predictions of the Drude theory. Conclusions. Experimental data confirm the applicability of the Drude theory for describing the electrophysical properties of SnO₂:Sb. The choice of interpolation method should consider both the physical nature of the dependency and the characteristics of the experimental data. For linear dependencies, linear interpolation is optimal. For nonlinear dependencies, Akima interpolation is preferred. The findings can be used to optimize technological parameters for producing SnO₂:Sb with tailored electrophysical properties.
- 1 January 2025
- Published by Penza State University in University proceedings. Volga region. Physical and mathematical sciences
- No. 3
Analysis of relaxation time dependences on influencing factors in conducting oxides based on SnO2:Sb
Background. Transparent conducting oxides (TCOs) based on SnO₂:Sb are promising materials for transparent electrodes in optoelectronic devices. Understanding the mechanisms of charge carrier conductivity and relaxation in these materials is crucial for optimizing their electrophysical properties. The purpose of this work is to analyze experimental data on the dependence of relaxation time on electron concentration, conductivity, and mobility in SnO₂:Sb using various interpolation and approximation methods, as well as to compare the obtained results with the Drude theory. Materials and methods. The study utilized experimental data on electron concentration (n), conductivity (σ), mobility (μ), and relaxation time (τ) for SnO₂:Sb samples. Three interpolation methods were applied for data processing: linear interpolation, Akima interpolation, and cubic spline. Approximation was performed using the least squares method with first-degree polynomials. The analysis accounted for the logarithmic nature of the dependencies for electron concentration and conductivity. Results. A comparative analysis of interpolation methods was conducted for three dependencies. It was found that the dependence of relaxation time on mobility is well described by linear interpolation, consistent with the Drude theory. For other relaxation time dependencies, Akima interpolation proved most suitable due to its ability to handle nonlinear trends. Cubic spline exhibited oscillations in regions with abrupt data changes. The results align with theoretical predictions of the Drude theory. Conclusions. Experimental data confirm the applicability of the Drude theory for describing the electrophysical properties of SnO₂:Sb. The choice of interpolation method should consider both the physical nature of the dependency and the characteristics of the experimental data. For linear dependencies, linear interpolation is optimal. For nonlinear dependencies, Akima interpolation is preferred. The findings can be used to optimize technological parameters for producing SnO₂:Sb with tailored electrophysical properties.
- Open Access
- 1 January 2025
- Published by Perm State University (PSU) in Вестник Пермского университета. Физика
- No. 4,p. 16-23
Defect structure and conductivity mechanisms in nanostructured oxide films obtained by spray pyrolysis method
The defect structure and electronic conductivity mechanisms in nanostructured films of transparent conducting oxides ZnO and SnO₂ obtained by spray pyrolysis were investigated. Using electron paramagnetic resonance (EPR), photoluminescence (PL) spectroscopy, and temperature-dependent electrical conductivity measurements, the main types of defects were identified, and their influence on transport properties was analyzed. It has been established that the film conductivity is determined by a combination of processes: intragrain electron transport through the conduction band, tunneling through potential barriers at grain boundaries, and thermally activated conductivity through defect states. The paper proposes a new conductivity model that takes into account the morphological features of nanostructured films and the energy distribution of defect states. It is shown that oxygen vacancies VO and interstitial zinc atoms Zni are the main donor centers in ZnO, while oxygen vacancies and impurity atoms dominate in SnO₂. The developed model allows predicting the electrical properties of oxide films depending on synthesis conditions and can be used to optimize technological parameters for obtaining transparent conducting coatings.
- 1 January 2025
- Published by Perm State University (PSU) in Вестник Пермского университета. Физика
- No. 4,p. 16-23
Open AccessDefect structure and conductivity mechanisms in nanostructured oxide films obtained by spray pyrolysis method
The defect structure and electronic conductivity mechanisms in nanostructured films of transparent conducting oxides ZnO and SnO₂ obtained by spray pyrolysis were investigated. Using electron paramagnetic resonance (EPR), photoluminescence (PL) spectroscopy, and temperature-dependent electrical conductivity measurements, the main types of defects were identified, and their influence on transport properties was analyzed. It has been established that the film conductivity is determined by a combination of processes: intragrain electron transport through the conduction band, tunneling through potential barriers at grain boundaries, and thermally activated conductivity through defect states. The paper proposes a new conductivity model that takes into account the morphological features of nanostructured films and the energy distribution of defect states. It is shown that oxygen vacancies VO and interstitial zinc atoms Zni are the main donor centers in ZnO, while oxygen vacancies and impurity atoms dominate in SnO₂. The developed model allows predicting the electrical properties of oxide films depending on synthesis conditions and can be used to optimize technological parameters for obtaining transparent conducting coatings.
- 1 January 2025
- Published by Penza State University in University proceedings. Volga region. Physical and mathematical sciences
- No. 1
Investigation of the electronic and optical properties of thin-film coatings based on SnO₂:Sb
Background. Transparent conducting oxides (TCOs) based on tin dioxide (SnO₂) doped with antimony (Sb) are of significant interest for modern technologies due to their unique combination of high transparency in the visible range and good electrical conductivity. Such materials are widely used in optoelectronics, solar cells, and sensor devices. However, optimizing their properties requires a deep understanding of charge transport mechanisms, which can be achieved using the classical Drude theory. The purpose of this work is to apply the Drude theory to analyze the electronic and optical properties of SnO₂:Sb thin films obtained by spray pyrolysis, as well as to investigate the influence of charge carrier concentration and mobility on conductivity and plasma frequency. Materials and methods. Thin films of SnO₂:Sb were deposited on glass substrates using the spray pyrolysis method. The charge carrier concentration n was determined using the Hall effect, and the resistivity was measured using the four-point probe method. The classical Drude theory was used to analyze the electronic properties, allowing the calculation of carrier mobility, relaxation time, and plasma frequency. Optical properties were investigated using spectroscopy in the visible and near-infrared ranges. Results. The conductivity σ of SnO₂:Sb films varied in the range of 10³–10⁴ S/m depending on the antimony doping level. The carrier mobility ranged from 4.83∙10⁻⁴ to 15.91∙10⁻⁴ m²/(V·s). The plasma frequency was in the range of 1.19∙10¹⁴ to 7.94∙10¹⁴ rad/s, corresponding to wavelengths from 378 nm to 2520 nm. The SnO₂:Sb films demonstrated high transparency in the visible range (over 80%) for samples with low carrier concentration. With increasing carrier concentration, a shift in the plasma frequency toward the ultraviolet region was observed, leading to a decrease in transparency in the visible range. The drift velocity increased linearly with applied voltage and decreased with increasing distance between contacts. For samples with high mobility, the drift velocityreached values of 13.25∙10⁻⁴ m/s at U =5 mV and d =5 mm. Conclusions. The Drude theory was successfully applied to analyze the electronic and optical properties of SnO₂:Sb thin films. It was established that the conductivity and transparency of the material can be optimized by varying the antimony doping level. It was shown that the drift velocity of charge carriers depends on mobility, voltage, and sample geometry. This opens up opportunities for designing devices with improved characteristics. The obtained results demonstrate the potential of using SnO₂:Sb in optoelectronic devices where a combination of high transparency and conductivity is required.
- 1 January 2025
- Published by Penza State University in University proceedings. Volga region. Physical and mathematical sciences
- No. 1
Investigation of the electronic and optical properties of thin-film coatings based on SnO₂:Sb
Background. Transparent conducting oxides (TCOs) based on tin dioxide (SnO₂) doped with antimony (Sb) are of significant interest for modern technologies due to their unique combination of high transparency in the visible range and good electrical conductivity. Such materials are widely used in optoelectronics, solar cells, and sensor devices. However, optimizing their properties requires a deep understanding of charge transport mechanisms, which can be achieved using the classical Drude theory. The purpose of this work is to apply the Drude theory to analyze the electronic and optical properties of SnO₂:Sb thin films obtained by spray pyrolysis, as well as to investigate the influence of charge carrier concentration and mobility on conductivity and plasma frequency. Materials and methods. Thin films of SnO₂:Sb were deposited on glass substrates using the spray pyrolysis method. The charge carrier concentration n was determined using the Hall effect, and the resistivity was measured using the four-point probe method. The classical Drude theory was used to analyze the electronic properties, allowing the calculation of carrier mobility, relaxation time, and plasma frequency. Optical properties were investigated using spectroscopy in the visible and near-infrared ranges. Results. The conductivity σ of SnO₂:Sb films varied in the range of 10³–10⁴ S/m depending on the antimony doping level. The carrier mobility ranged from 4.83∙10⁻⁴ to 15.91∙10⁻⁴ m²/(V·s). The plasma frequency was in the range of 1.19∙10¹⁴ to 7.94∙10¹⁴ rad/s, corresponding to wavelengths from 378 nm to 2520 nm. The SnO₂:Sb films demonstrated high transparency in the visible range (over 80%) for samples with low carrier concentration. With increasing carrier concentration, a shift in the plasma frequency toward the ultraviolet region was observed, leading to a decrease in transparency in the visible range. The drift velocity increased linearly with applied voltage and decreased with increasing distance between contacts. For samples with high mobility, the drift velocityreached values of 13.25∙10⁻⁴ m/s at U =5 mV and d =5 mm. Conclusions. The Drude theory was successfully applied to analyze the electronic and optical properties of SnO₂:Sb thin films. It was established that the conductivity and transparency of the material can be optimized by varying the antimony doping level. It was shown that the drift velocity of charge carriers depends on mobility, voltage, and sample geometry. This opens up opportunities for designing devices with improved characteristics. The obtained results demonstrate the potential of using SnO₂:Sb in optoelectronic devices where a combination of high transparency and conductivity is required.
- 1 August 2024
- Published by Springer Nature in Measurement Techniques
- Vol. 67 (5) , 377-385
The system of automatic control of the substrate temperature as part of the installation for the production of film material by spray pyrolysis
- 1 August 2024
- Published by Springer Nature in Measurement Techniques
- Vol. 67 (5) , 377-385
The system of automatic control of the substrate temperature as part of the installation for the production of film material by spray pyrolysis