Guangyu Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guangyu Yan has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Binhong Cao
Department of Electrical Engineering, Arizona State University, Tempe, AZ, USA
2 shared publications - Jie Deng
Power Electronics and Energy Conversion (PEEC) Lab, Arizona State University, Tempe, AZ, USA
2 shared publications Meixuan Li
Sustainable Energy and Environment Thrust, The Hong Kong University of Science and Technology (Guangzhou), Guangzhou, China
2 shared publications- Zhicheng Guo
Department of Electrical Engineering, Arizona State University, Tempe, AZ, USA
2 shared publications Bowang Zhang
1 shared publication- Bowang Zhang
Sustainable Energy and Environment Thrust, The Hong Kong University of Science and Technology (Guangzhou), Guangzhou, China
1 shared publication
Latest Publications
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (4) , 4546-4550
An Integrated Inductive Power and Capacitive Data Transfer System Using Ultrathin Nanocrystalline Laminated Sheets
This letter proposes a novel system that exploits 0.9 mm-thick nanocrystalline (NC) laminated sheets to integrate inductive power transfer (IPT) with capacitive data transfer. Besides enhancing inductive coupling and providing magnetic shielding, the NC laminated sheets can also enable capacitive coupling for data transfer through the parasitic capacitances, benefiting from the high electrical conductivity of NC material. Compared to those similar solutions, the NC laminated sheets combine the functions of ferrite plates and metal plates, enabling a more compact system. A 100-W prototype is established with 97.2% power transfer efficiency and 1-Mbps data rate. The operation of data transfer has almost no impact on power efficiency, and the interference from the power channel to data channel is sufficiently low, which guarantees the correct recovery of data bits.
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (4) , 4546-4550
An Integrated Inductive Power and Capacitive Data Transfer System Using Ultrathin Nanocrystalline Laminated Sheets
This letter proposes a novel system that exploits 0.9 mm-thick nanocrystalline (NC) laminated sheets to integrate inductive power transfer (IPT) with capacitive data transfer. Besides enhancing inductive coupling and providing magnetic shielding, the NC laminated sheets can also enable capacitive coupling for data transfer through the parasitic capacitances, benefiting from the high electrical conductivity of NC material. Compared to those similar solutions, the NC laminated sheets combine the functions of ferrite plates and metal plates, enabling a more compact system. A 100-W prototype is established with 97.2% power transfer efficiency and 1-Mbps data rate. The operation of data transfer has almost no impact on power efficiency, and the interference from the power channel to data channel is sufficiently low, which guarantees the correct recovery of data bits.
- 12 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (4) , 4530-4535
A Novel Hybrid Magnetic Core Structure for Planar Medium-Frequency Transformer
This letter proposes a novel planar hybrid magnetic core structure to address the significant eddy current loss issue of nanocrystalline (NC) laminated core in medium-frequency and high-frequency transformers. The proposed approach mitigates eddy current losses caused by flux components perpendicular to the NC cores by introducing ferrite cores that redirect these flux components. The hybrid core structure was validated with a planar transformer with rectangular coils subjected to pulse width modulation (PWM)-wave excitation from 200 V–600 V and 20–200 kHz. Compared with the NC-only design, the hybrid core structure demonstrates a 26.7% loss reduction under 600 V/20 kHz excitation, along with improved uniformity in flux density and temperature distribution. This approach is also validated over a wide frequency range (20–200 kHz) at a fixed voltage amplitude of 200 V, where the loss reduction increases with frequency, reaching 47.8% at 200 kHz. Moreover, the proposed hybrid structure also demonstrated its effectiveness in a planar transformer with Double-D (DD) coils at 200 V, achieving more than 50% core-loss reduction in the 50–200 kHz range compared with the NC-only design.
- 12 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (4) , 4530-4535
A Novel Hybrid Magnetic Core Structure for Planar Medium-Frequency Transformer
This letter proposes a novel planar hybrid magnetic core structure to address the significant eddy current loss issue of nanocrystalline (NC) laminated core in medium-frequency and high-frequency transformers. The proposed approach mitigates eddy current losses caused by flux components perpendicular to the NC cores by introducing ferrite cores that redirect these flux components. The hybrid core structure was validated with a planar transformer with rectangular coils subjected to pulse width modulation (PWM)-wave excitation from 200 V–600 V and 20–200 kHz. Compared with the NC-only design, the hybrid core structure demonstrates a 26.7% loss reduction under 600 V/20 kHz excitation, along with improved uniformity in flux density and temperature distribution. This approach is also validated over a wide frequency range (20–200 kHz) at a fixed voltage amplitude of 200 V, where the loss reduction increases with frequency, reaching 47.8% at 200 kHz. Moreover, the proposed hybrid structure also demonstrated its effectiveness in a planar transformer with Double-D (DD) coils at 200 V, achieving more than 50% core-loss reduction in the 50–200 kHz range compared with the NC-only design.
- 18 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (1) , 323-327
A Simultaneous Wireless Power and Full-Duplex Data Transfer System Using a Mix of Inductive and Capacitive Couplings
This brief presents a novel simultaneous wireless power and data transfer (SWPDT) system that combines inductive and capacitive couplings, featuring full-duplex communication with high data transfer rates. Specifically, the power and forward data are transferred through inductive coupling respectively by means of the DD coils and Q coils, while the backward data is transferred through capacitive coupling by means of the stray capacitances. Because of the decoupling characteristic of the DDQ coil structure and the use of two coupling types, the interferences among the power, forward data, and backward data are relatively low. By integrating the two coupling types, a comprehensive circuit model of full-duplex data transfer is established and analyzed. Finally, a 145-W prototype is actualized with 91.4% power transfer efficiency. The forward and backward data transfer rates are 150 kbps and 600 kbps, respectively, demonstrating the feasibility of the proposed system.
- 18 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (1) , 323-327
A Simultaneous Wireless Power and Full-Duplex Data Transfer System Using a Mix of Inductive and Capacitive Couplings
This brief presents a novel simultaneous wireless power and data transfer (SWPDT) system that combines inductive and capacitive couplings, featuring full-duplex communication with high data transfer rates. Specifically, the power and forward data are transferred through inductive coupling respectively by means of the DD coils and Q coils, while the backward data is transferred through capacitive coupling by means of the stray capacitances. Because of the decoupling characteristic of the DDQ coil structure and the use of two coupling types, the interferences among the power, forward data, and backward data are relatively low. By integrating the two coupling types, a comprehensive circuit model of full-duplex data transfer is established and analyzed. Finally, a 145-W prototype is actualized with 91.4% power transfer efficiency. The forward and backward data transfer rates are 150 kbps and 600 kbps, respectively, demonstrating the feasibility of the proposed system.
- Open Access
- 29 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
A Simultaneous Wireless Power and Full-Duplex Data Transfer System Using a Mix of Inductive and Capacitive Couplings
This article presents a novel simultaneous wireless power and data transfer (SWPDT) system that combines inductive and capacitive couplings, featuring full-duplex communication with high data transfer rates. Specifically, the power and forward data are transferred through inductive coupling respectively by means of the DD coils and Q coils, while the backward data is transferred through capacitive coupling by means of the stray capacitances. Because of the decoupling characteristic of the DDQ coil structure and the use of two coupling types, the interferences among the power, forward data, and backward data are relatively low. By integrating the two coupling types, a comprehensive circuit model of full-duplex data transfer is established and analyzed. Finally, a 145-W prototype is actualized with 91.4% power transfer efficiency. The forward and backward data transfer rates are 150 kbps and 600 kbps, respectively, demonstrating the feasibility of the proposed system.
- 29 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessA Simultaneous Wireless Power and Full-Duplex Data Transfer System Using a Mix of Inductive and Capacitive Couplings
This article presents a novel simultaneous wireless power and data transfer (SWPDT) system that combines inductive and capacitive couplings, featuring full-duplex communication with high data transfer rates. Specifically, the power and forward data are transferred through inductive coupling respectively by means of the DD coils and Q coils, while the backward data is transferred through capacitive coupling by means of the stray capacitances. Because of the decoupling characteristic of the DDQ coil structure and the use of two coupling types, the interferences among the power, forward data, and backward data are relatively low. By integrating the two coupling types, a comprehensive circuit model of full-duplex data transfer is established and analyzed. Finally, a 145-W prototype is actualized with 91.4% power transfer efficiency. The forward and backward data transfer rates are 150 kbps and 600 kbps, respectively, demonstrating the feasibility of the proposed system.