Xin Jin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xin Jin has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Xiulan Cheng
Shanghai Jiao Tong University
4 shared publications Chenxing Guo
Department of Electronic Engineering, Shanghai Jiao Tong University, Shanghai, China
3 shared publications- Jinbin Xu
Shanghai Jiao Tong University
3 shared publications Xueling Quan
3 shared publicationsCuiwei Xue
Shanghai Jiao Tong University
2 shared publicationsLiucheng Fu
2 shared publications
Latest Publications
- 23 January 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (3) , 864-867
Inverse design and fabrication of high-efficiency perfectly vertical LNOI grating couplers
A perfectly vertical grating coupler (GC) on X-cut lithium niobate on insulator (LNOI) platform is designed and demonstrated. The optimized random grating structure of GC is designed by an inverse design method and exhibits a simulated coupling efficiency of approximately −2.52 dB and measured coupling efficiency of approximately −3.18 dB at a communication wavelength of 1550 nm. This is the highest, to the best of our knowledge, measured result yet reported compared to the coupling efficiency of LNOI grating couplers without reflector in existing literature, regardless of the angle of incidence and the thickness of lithium niobate. The fabrication tolerance is investigated, and the discrepancy between simulation and experiment is analyzed.
- 23 January 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (3) , 864-867
Inverse design and fabrication of high-efficiency perfectly vertical LNOI grating couplers
A perfectly vertical grating coupler (GC) on X-cut lithium niobate on insulator (LNOI) platform is designed and demonstrated. The optimized random grating structure of GC is designed by an inverse design method and exhibits a simulated coupling efficiency of approximately −2.52 dB and measured coupling efficiency of approximately −3.18 dB at a communication wavelength of 1550 nm. This is the highest, to the best of our knowledge, measured result yet reported compared to the coupling efficiency of LNOI grating couplers without reflector in existing literature, regardless of the angle of incidence and the thickness of lithium niobate. The fabrication tolerance is investigated, and the discrepancy between simulation and experiment is analyzed.
- 12 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (2) , 701-711
Graded-Index Lens Based Edge Coupler With Low-Loss, Broad Bandwidth for Efficient Coupling Between Silicon Waveguide and Standard Single-Mode Fiber
Efficient fiber-to-chip coupling is crucial for achieving high-performance silicon photonic chips. While lensed fiber to chip coupling has been extensively researched and proven excellent, it does have limitations such as strict alignment tolerance and high cost. Therefore, the recommended approach is the standard single-mode fiber (SMF)-to-chip coupling. One potential solution for SMF-to-chip coupling involves an edge coupler based on a graded-index (GRIN) lens; however, this method often requires a GRIN lens with numerous layers, making fabrication extremely challenging. In this study, we propose and experimentally validate an edge coupler based on a GRIN lens assisted by a complementary taper structure. This new type of composite structure demonstrates low coupling loss, broad bandwidth, and polarization insensitivity, enabling efficient SMF-to-chip coupling. Our design simplifies the fabrication process by significantly reducing the number of layers in the GRIN lens while achieving lower coupling losses compared to conventional GRIN lens-based edge couplers. Experimental results demonstrate that at 1550 nm, the measured TE and TM mode coupling losses are 1.21 dB and 1.78 dB respectively, while maintaining the 1 dB bandwidth exceeding 90 nm.
- 12 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (2) , 701-711
Graded-Index Lens Based Edge Coupler With Low-Loss, Broad Bandwidth for Efficient Coupling Between Silicon Waveguide and Standard Single-Mode Fiber
Efficient fiber-to-chip coupling is crucial for achieving high-performance silicon photonic chips. While lensed fiber to chip coupling has been extensively researched and proven excellent, it does have limitations such as strict alignment tolerance and high cost. Therefore, the recommended approach is the standard single-mode fiber (SMF)-to-chip coupling. One potential solution for SMF-to-chip coupling involves an edge coupler based on a graded-index (GRIN) lens; however, this method often requires a GRIN lens with numerous layers, making fabrication extremely challenging. In this study, we propose and experimentally validate an edge coupler based on a GRIN lens assisted by a complementary taper structure. This new type of composite structure demonstrates low coupling loss, broad bandwidth, and polarization insensitivity, enabling efficient SMF-to-chip coupling. Our design simplifies the fabrication process by significantly reducing the number of layers in the GRIN lens while achieving lower coupling losses compared to conventional GRIN lens-based edge couplers. Experimental results demonstrate that at 1550 nm, the measured TE and TM mode coupling losses are 1.21 dB and 1.78 dB respectively, while maintaining the 1 dB bandwidth exceeding 90 nm.
- 22 July 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (16) , 28259-28266
O-band and C-band dual-polarization SMF-28 edge coupler with SiON taper cladding based on silicon nitride platform
Optical communication is progressing towards low power consumption and lightweight solutions, necessitating the integration of multispectral output capabilities within a single optical module. We demonstrate a SiN photonic platform-based edge coupler for a standard single mode fiber (SMF) that enables operation in both the O-band and C-band simultaneously. The device is composed of a multi-segment SiN inverse taper and SiON taper cladding with specific refractive index. The measured edge coupler exhibits a coupling loss of less than 1 dB/facet, 0.5 dB bandwidth exceeding 100 nm from 1260 nm to 1360 nm; and a coupling loss of less than 2 dB/facet, 1 dB bandwidth exceeding 100 nm from 1500 nm to 1600 nm. Furthermore, the polarization dependent loss (PDL) remained less than 0.3 dB throughout the measurement range.
- 22 July 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (16) , 28259-28266
O-band and C-band dual-polarization SMF-28 edge coupler with SiON taper cladding based on silicon nitride platform
Optical communication is progressing towards low power consumption and lightweight solutions, necessitating the integration of multispectral output capabilities within a single optical module. We demonstrate a SiN photonic platform-based edge coupler for a standard single mode fiber (SMF) that enables operation in both the O-band and C-band simultaneously. The device is composed of a multi-segment SiN inverse taper and SiON taper cladding with specific refractive index. The measured edge coupler exhibits a coupling loss of less than 1 dB/facet, 0.5 dB bandwidth exceeding 100 nm from 1260 nm to 1360 nm; and a coupling loss of less than 2 dB/facet, 1 dB bandwidth exceeding 100 nm from 1500 nm to 1600 nm. Furthermore, the polarization dependent loss (PDL) remained less than 0.3 dB throughout the measurement range.
- 1 April 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (7) , 1856-1859
Design and demonstration of high efficiency perfectly vertical grating couplers with a random structure
Utilizing an automated optimization method, we propose a perfectly vertical grating coupler (PVGC) characterized by random structure, superior performance, simplified fabrication process, and increased minimum feature size (MFS). Within the range of MFS from 60 to 180 nm, the optimized PVGC exhibited a simulated coupling efficiency of approximately −2.0 dB at 1550 nm with a 34 nm 1-dB bandwidth. Experimental results for the PVGCs fabricated by electron beam lithography (EBL) demonstrated coupling efficiencies ranging from −2.5 to −2.8 dB with a 32 nm 1-dB bandwidth while maintaining high manufacturing tolerances. This represents the most outstanding experimental outcome to date regarding the coupling performance of a PVGC fabricated on a 220 nm silicon on insulator (SOI), without requiring any complex processes as reported in the existing literature.
- 1 April 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (7) , 1856-1859
Design and demonstration of high efficiency perfectly vertical grating couplers with a random structure
Utilizing an automated optimization method, we propose a perfectly vertical grating coupler (PVGC) characterized by random structure, superior performance, simplified fabrication process, and increased minimum feature size (MFS). Within the range of MFS from 60 to 180 nm, the optimized PVGC exhibited a simulated coupling efficiency of approximately −2.0 dB at 1550 nm with a 34 nm 1-dB bandwidth. Experimental results for the PVGCs fabricated by electron beam lithography (EBL) demonstrated coupling efficiencies ranging from −2.5 to −2.8 dB with a 32 nm 1-dB bandwidth while maintaining high manufacturing tolerances. This represents the most outstanding experimental outcome to date regarding the coupling performance of a PVGC fabricated on a 220 nm silicon on insulator (SOI), without requiring any complex processes as reported in the existing literature.