Christian Klumpp
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Christian Klumpp has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Peter Jeschke
Institute of Jet Propulsion and Turbomachinery, RWTH Aachen University, Aachen, Germany
2 shared publications Daniel Weintraub
GasTurb GmbH, Aachen, Germany
1 shared publication- Daniel Weintraub
Institute of Jet Propulsion and Turbomachinery, RWTH Aachen University, Aachen, Germany
1 shared publication - Daniel Weintraub
GasTurb GmbH , Aachen 52074, Germany
1 shared publication Heinz Pitsch
Institute for Combustion Technology, RWTH Aachen University, Aachen, Germany
1 shared publication- Julian Callard
Institute of Jet Propulsion and Turbomachinery, RWTH Aachen University, Aachen, Germany
1 shared publication
Latest Publications
- Open Access
- 14 October 2025
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 17 (3) , 1011-1024
Alternative fuels in aero engine performance calculations
This paper presents a method for gas turbine performance calculations with alternative fuels with a particular focus on their use in aircraft engines. The effects of various alternative aviation fuels on fuel consumption, CO 2 emissions, and contrail formation are examined in a comparative study. We use the GasTurb performance software and calculate heat release and hot section gas properties using a chemical equilibrium solver. Fuels with complex compositions are included in the calculation via surrogates of a limited number of known species that mimic the relevant properties of the real fuel. An automated method is used for the fuel surrogate formulation. We compare the results of this rigorous approach with the simplified approach of calculating the heat release using an alternative fuel’s heating value while still using the gas properties of conventional Jet A-1. The results show that the latter approach systematically overpredicts fuel consumption by up to 0.2% for aromatics-free synthetic kerosene (e.g., “biofuels”). Overall, aircraft engines running on alternative fuels tend to be more fuel efficient due to their often higher hydrogen contents and thus fuel heating values. We find reductions in fuel consumption of up to 2.8% during cruise when using aromatics-free synthetic kerosene. We further assess how alternative fuels affect contrail formation based on the Schmidt-Appleman criterion. Contrails can form 200 m lower under cruise conditions when burning aromatics-free synthetic kerosene instead of Jet A-1 with identical thrust requirements and under the same atmospheric conditions, mainly due to their higher hydrogen content. In summary, we present a flexible yet easy-to-use method for studying fuel effects in performance calculations that avoids small but systematic errors by rigorously calculating the heat release and hot section gas properties for each fuel.
- 14 October 2025
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 17 (3) , 1011-1024
Open AccessAlternative fuels in aero engine performance calculations
This paper presents a method for gas turbine performance calculations with alternative fuels with a particular focus on their use in aircraft engines. The effects of various alternative aviation fuels on fuel consumption, CO 2 emissions, and contrail formation are examined in a comparative study. We use the GasTurb performance software and calculate heat release and hot section gas properties using a chemical equilibrium solver. Fuels with complex compositions are included in the calculation via surrogates of a limited number of known species that mimic the relevant properties of the real fuel. An automated method is used for the fuel surrogate formulation. We compare the results of this rigorous approach with the simplified approach of calculating the heat release using an alternative fuel’s heating value while still using the gas properties of conventional Jet A-1. The results show that the latter approach systematically overpredicts fuel consumption by up to 0.2% for aromatics-free synthetic kerosene (e.g., “biofuels”). Overall, aircraft engines running on alternative fuels tend to be more fuel efficient due to their often higher hydrogen contents and thus fuel heating values. We find reductions in fuel consumption of up to 2.8% during cruise when using aromatics-free synthetic kerosene. We further assess how alternative fuels affect contrail formation based on the Schmidt-Appleman criterion. Contrails can form 200 m lower under cruise conditions when burning aromatics-free synthetic kerosene instead of Jet A-1 with identical thrust requirements and under the same atmospheric conditions, mainly due to their higher hydrogen content. In summary, we present a flexible yet easy-to-use method for studying fuel effects in performance calculations that avoids small but systematic errors by rigorously calculating the heat release and hot section gas properties for each fuel.
- Open Access
- 8 September 2025
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 17 (2) , 913-924
Reducing contrail formation by engine design and operating point adaptation of aircraft engines
In this paper, we present an analysis of the effect of engine design modifications and operating point adaptation mechanisms on the conditions in the engine exhaust plume, with a focus on contrail formation which is evaluated using the Schmidt-Appleman criterion. Our goal is to find ways to prevent contrail formation and thus reduce the climate impact of aviation. We use the gas turbine performance software GasTurb to model an aircraft engine of a contemporary short- to medium-range aircraft. We then examine several operating point adaption mechanisms with regard to their influence on the exhaust conditions and the resulting mixing line in the Schmidt-Appleman diagram. These are the bypass and core nozzle areas, high- and low-pressure turbine capacities, a handling bleed, and a high-pressure bleed. The main influence on the mixing line in the Schmidt-Appleman diagram is the change in exhaust jet temperature and its water content, which is affected by the fuel flow resulting from the engine’s operating point and efficiency. All measures are evaluated based on the shift in the critical altitude of contrail formation, with a minimum increase of 450 m in cruise flight conditions deemed necessary for any effective measure. We find that it is possible to reduce contrail formation. However, the critical altitude gains are only 57 m to 206 m for all measures investigated, which is insufficient to avoid contrail formation in practice, as calculated using the Schmidt-Appleman criterion. The measures also significantly increase specific fuel consumption, with more effective measures leading to higher increases of up to 35 %. Given the results presented, we find that engine operating point adaptations as examined in this paper are not suitable for contrail reduction due to their low effectiveness and significant increase in fuel consumption. More fundamental design changes, such as engine cycle adaptations or the use of hydrogen as a fuel, may offer greater potential for contrail reduction.
- 8 September 2025
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 17 (2) , 913-924
Open AccessReducing contrail formation by engine design and operating point adaptation of aircraft engines
In this paper, we present an analysis of the effect of engine design modifications and operating point adaptation mechanisms on the conditions in the engine exhaust plume, with a focus on contrail formation which is evaluated using the Schmidt-Appleman criterion. Our goal is to find ways to prevent contrail formation and thus reduce the climate impact of aviation. We use the gas turbine performance software GasTurb to model an aircraft engine of a contemporary short- to medium-range aircraft. We then examine several operating point adaption mechanisms with regard to their influence on the exhaust conditions and the resulting mixing line in the Schmidt-Appleman diagram. These are the bypass and core nozzle areas, high- and low-pressure turbine capacities, a handling bleed, and a high-pressure bleed. The main influence on the mixing line in the Schmidt-Appleman diagram is the change in exhaust jet temperature and its water content, which is affected by the fuel flow resulting from the engine’s operating point and efficiency. All measures are evaluated based on the shift in the critical altitude of contrail formation, with a minimum increase of 450 m in cruise flight conditions deemed necessary for any effective measure. We find that it is possible to reduce contrail formation. However, the critical altitude gains are only 57 m to 206 m for all measures investigated, which is insufficient to avoid contrail formation in practice, as calculated using the Schmidt-Appleman criterion. The measures also significantly increase specific fuel consumption, with more effective measures leading to higher increases of up to 35 %. Given the results presented, we find that engine operating point adaptations as examined in this paper are not suitable for contrail reduction due to their low effectiveness and significant increase in fuel consumption. More fundamental design changes, such as engine cycle adaptations or the use of hydrogen as a fuel, may offer greater potential for contrail reduction.
- 19 September 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (1) , 1-11
Teaching Aero-Engine Performance: From Analytics to Hands-On Exercises Using Gas Turbine Performance Software
In this paper, we present an approach for teaching turbojet engine performance that combines mathematical analysis with the use of performance software to provide students with a comprehensive and in-depth understanding of engine performance and how it is affected by design parameter choices. In the first part, we present the derivation of a universally valid analytical model for turbojet engine cycle design, which is the basis of the propulsion courses at RWTH Aachen University. The analytical model allows for the calculation of specific thrust as well as thermal and propulsive efficiencies as a function of pressure ratios and burner exit temperature. These are all expressed as differentiable functions. Their mathematical extremes form a basis for examining the intricate relationships in turbojet engine design. In the second part, we move from theory to practice. We utilize the GasTurb software, computing turbojet engine cycles for a wide range of cycle design parameters. The analytically derived trends are validated and errors introduced by simplifications are assessed. Differences between the analytical approach and software-based performance simulations of real engines, like temperature-dependent gas properties and secondary air systems, are emphasized and discussed, thus providing a bridge to real-world applications. In summary, this paper describes a two-step approach to teaching turbojet engine design using analytics and performance software. Each approach alone can be used to enrich and extend existing performance courses. Combining the approaches has significant benefits, improving understanding and inspiring students to pursue further research in the field of propulsion.
- 19 September 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (1) , 1-11
Teaching Aero-Engine Performance: From Analytics to Hands-On Exercises Using Gas Turbine Performance Software
In this paper, we present an approach for teaching turbojet engine performance that combines mathematical analysis with the use of performance software to provide students with a comprehensive and in-depth understanding of engine performance and how it is affected by design parameter choices. In the first part, we present the derivation of a universally valid analytical model for turbojet engine cycle design, which is the basis of the propulsion courses at RWTH Aachen University. The analytical model allows for the calculation of specific thrust as well as thermal and propulsive efficiencies as a function of pressure ratios and burner exit temperature. These are all expressed as differentiable functions. Their mathematical extremes form a basis for examining the intricate relationships in turbojet engine design. In the second part, we move from theory to practice. We utilize the GasTurb software, computing turbojet engine cycles for a wide range of cycle design parameters. The analytically derived trends are validated and errors introduced by simplifications are assessed. Differences between the analytical approach and software-based performance simulations of real engines, like temperature-dependent gas properties and secondary air systems, are emphasized and discussed, thus providing a bridge to real-world applications. In summary, this paper describes a two-step approach to teaching turbojet engine design using analytics and performance software. Each approach alone can be used to enrich and extend existing performance courses. Combining the approaches has significant benefits, improving understanding and inspiring students to pursue further research in the field of propulsion.