Nicolo Incardona
Research Subjects
Nicolo Incardona has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Manuel Martinez-Corral
D Imaging and Display Laboratory, Department of Optics, Universitat de Valncia, Burjassot, Spain
7 shared publications - Genaro Saavedra
Universitat de València
4 shared publications Angel Tolosa
D Imaging and Display Laboratory, Department of Optics, Universitat de Valncia, Burjassot, Spain
2 shared publications- Gabriele Scrofani
Univ. de València (France)
2 shared publications Genaro Saavedra
D Imaging and Display Laboratory, Department of Optics, Universitat de Valncia, Burjassot, Spain
2 shared publicationsManuel Martinez-Corral
D Imaging and Display Laboratory, Department of Optics, Universitat de València, 46100 Burjassot, Spain
2 shared publications
Latest Publications
- Open Access
- 24 October 2026
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 208
Non-mechanical refocusing in brightfield microscopy via amplified longitudinal chromatic aberration and wavelength tuning
- 24 October 2026
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 208
Open AccessNon-mechanical refocusing in brightfield microscopy via amplified longitudinal chromatic aberration and wavelength tuning
- Open Access
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 18 (1) , 1-7
3D-Imaging Endoscopy Through Electronic Focusing
Conventional endoscopic systems provide two-dimensional images of three-dimensional structures. Real depth information is lost in these systems. Therefore, depth perception relies uniquely on monocular cues, such as occlusions, shadows or motion parallax. Three-dimensional endoscopy has been proposed to mitigate these adverse effects. Nevertheless, as it is usually based on aperture sub-sampling, the provided images suffer from a strong reduction in resolution, vulnerability to off-axis aberrations, and very low light efficiency. To face the challenge, we report here a 3D-imaging endoscopy system based on the implementation of an optical add-on that incorporates an electrically tunable lens. We demonstrate that, when attached to a standard commercial endoscope, the proposed system allows the capture of stacks of 2D images focused at different depths, with the same resolution as that provided by the endoscope alone. To demonstrate that the system is capable of capturing stacks of images with distinguishable depths, we calculated the depth map of a 3D simulated biological scenario with a standard free image-processing software. All these capabilities can be of great utility in surgery practice that require the 3D reconstruction of the surgical field.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 18 (1) , 1-7
Open Access3D-Imaging Endoscopy Through Electronic Focusing
Conventional endoscopic systems provide two-dimensional images of three-dimensional structures. Real depth information is lost in these systems. Therefore, depth perception relies uniquely on monocular cues, such as occlusions, shadows or motion parallax. Three-dimensional endoscopy has been proposed to mitigate these adverse effects. Nevertheless, as it is usually based on aperture sub-sampling, the provided images suffer from a strong reduction in resolution, vulnerability to off-axis aberrations, and very low light efficiency. To face the challenge, we report here a 3D-imaging endoscopy system based on the implementation of an optical add-on that incorporates an electrically tunable lens. We demonstrate that, when attached to a standard commercial endoscope, the proposed system allows the capture of stacks of 2D images focused at different depths, with the same resolution as that provided by the endoscope alone. To demonstrate that the system is capable of capturing stacks of images with distinguishable depths, we calculated the depth map of a 3D simulated biological scenario with a standard free image-processing software. All these capabilities can be of great utility in surgery practice that require the 3D reconstruction of the surgical field.
- 28 October 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (21) , 6750-6753
Darkfield Mueller matrix microscope allows the observation of single cells with high contrast
The polarization of light refers to how its electric field oscillates in space and time. This property is highly sensitive to the interaction with matter. Hence, analyzing the changes in polarization is a powerful method for label-free investigation of microscopic samples. In this context, Mueller matrix microscopy utilizes the Stokes–Mueller formalism to describe the anisotropies of the specimens. In this work, we developed a Mueller matrix microscope for observing biological samples, based on a scanning architecture and a photoelastic modulator as a fast and motion-free polarization state generator. A darkfield-like detection scheme is implemented to enhance the contrast of the captured images. This modification enables the acquisition of high signal-to-noise ratio images for the off-diagonal elements of the Mueller matrix. Our attention is primarily focused on m 14 , which is particularly useful for describing the spatial organization of chiral structures, such as chromatin.
- 28 October 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (21) , 6750-6753
Darkfield Mueller matrix microscope allows the observation of single cells with high contrast
The polarization of light refers to how its electric field oscillates in space and time. This property is highly sensitive to the interaction with matter. Hence, analyzing the changes in polarization is a powerful method for label-free investigation of microscopic samples. In this context, Mueller matrix microscopy utilizes the Stokes–Mueller formalism to describe the anisotropies of the specimens. In this work, we developed a Mueller matrix microscope for observing biological samples, based on a scanning architecture and a photoelastic modulator as a fast and motion-free polarization state generator. A darkfield-like detection scheme is implemented to enhance the contrast of the captured images. This modification enables the acquisition of high signal-to-noise ratio images for the off-diagonal elements of the Mueller matrix. Our attention is primarily focused on m 14 , which is particularly useful for describing the spatial organization of chiral structures, such as chromatin.
- 24 February 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (5) , 9199-9212
Compact extended-DOF microscope through electrowetting lens
In optical microscopy, the intrinsic trade-off between resolution and depth of field (DOF) prevents the observation of 3D samples, limiting the observable thickness to some micrometers. The usual solution to this problem is to mechanically scan the object in depth. However, this slows down the process and can induce vibrations in soft samples. To overcome these drawbacks, we propose the use of an electrically tunable lens (ETL) based on electrowetting effect. Specifically, we propose an extended-DOF microscope set up in a very compact architecture in which full telecentricity is no longer achieved. On top of that, the axial scanning is carried out by the non-afocal coupling between two M12 lenses and the ETL. The main feature of the proposed extended-DOF microscope is that, despite its compactness, it can capture stacks of images with long depth range, constant magnification and a spatial resolution that equals that of the standard microscope and remains invariant along the depth range. We also show that the proposed idea can be implemented as an add-on attachable to any commercial microscope, which enables the use of all the microscope facilities.
- 24 February 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (5) , 9199-9212
Compact extended-DOF microscope through electrowetting lens
In optical microscopy, the intrinsic trade-off between resolution and depth of field (DOF) prevents the observation of 3D samples, limiting the observable thickness to some micrometers. The usual solution to this problem is to mechanically scan the object in depth. However, this slows down the process and can induce vibrations in soft samples. To overcome these drawbacks, we propose the use of an electrically tunable lens (ETL) based on electrowetting effect. Specifically, we propose an extended-DOF microscope set up in a very compact architecture in which full telecentricity is no longer achieved. On top of that, the axial scanning is carried out by the non-afocal coupling between two M12 lenses and the ETL. The main feature of the proposed extended-DOF microscope is that, despite its compactness, it can capture stacks of images with long depth range, constant magnification and a spatial resolution that equals that of the standard microscope and remains invariant along the depth range. We also show that the proposed idea can be implemented as an add-on attachable to any commercial microscope, which enables the use of all the microscope facilities.
- Open Access
- 29 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 30 (4: Adv. Mo) , 1-8
Thermo-Optical Modulation of PPLN Crystal for Tunable Poisson Spot Array
Lithium Niobate is a ferroelectric material with interesting physical properties. In particular, Periodically Poled Lithium Niobate (PPLN) crystals have been used in diverse applications, such as non-linear optics or microlens array fabrication. In this work, we used a PPLN crystal having hexagonal reversed polarization domains, disposed on a square array of 200 μm period. We applied a temperature gradient to the PPLN and simultaneously observed it with a lensless incoherent holographic microscope. We observed that the phase of the inverse polarization domains varied depending on the temperature applied. Therefore, we induced a thermo-optical modulation of the PPLN crystal. We further analysed the behaviour of the PPLN, propagating the complex field beyond the crystal and plotting its intensity. We found that an elongated bright spot was formed at the centre of each hexagonal reversed polarization domain, due to diffraction. Given their shape and the nature of the phenomenon, these intensity spots are similar to Poisson spots. The intensity of the spots depended on the phase of the PPLN (hence, on the temperature applied). Therefore, we were able to generate a tunable Poisson spot array by controlling the temperature of the PPLN.
- 29 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 30 (4: Adv. Mo) , 1-8
Open AccessThermo-Optical Modulation of PPLN Crystal for Tunable Poisson Spot Array
Lithium Niobate is a ferroelectric material with interesting physical properties. In particular, Periodically Poled Lithium Niobate (PPLN) crystals have been used in diverse applications, such as non-linear optics or microlens array fabrication. In this work, we used a PPLN crystal having hexagonal reversed polarization domains, disposed on a square array of 200 μm period. We applied a temperature gradient to the PPLN and simultaneously observed it with a lensless incoherent holographic microscope. We observed that the phase of the inverse polarization domains varied depending on the temperature applied. Therefore, we induced a thermo-optical modulation of the PPLN crystal. We further analysed the behaviour of the PPLN, propagating the complex field beyond the crystal and plotting its intensity. We found that an elongated bright spot was formed at the centre of each hexagonal reversed polarization domain, due to diffraction. Given their shape and the nature of the phenomenon, these intensity spots are similar to Poisson spots. The intensity of the spots depended on the phase of the PPLN (hence, on the temperature applied). Therefore, we were able to generate a tunable Poisson spot array by controlling the temperature of the PPLN.
- Open Access
- 17 April 2024
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 178
Self-assembling of PDMS microlens arrays through pyro-EHD for real-time 3D microscopy
- 17 April 2024
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 178
Open AccessSelf-assembling of PDMS microlens arrays through pyro-EHD for real-time 3D microscopy
- Open Access
Machine Learning-Based View Synthesis in Fourier Lightfield Microscopy
Current interest in Fourier lightfield microscopy is increasing, due to its ability to acquire 3D images of thick dynamic samples. This technique is based on simultaneously capturing, in a single shot, and with a monocular setup, a number of orthographic perspective views of 3D microscopic samples. An essential feature of Fourier lightfield microscopy is that the number of acquired views is low, due to the trade-off relationship existing between the number of views and their corresponding lateral resolution. Therefore, it is important to have a tool for the generation of a high number of synthesized view images, without compromising their lateral resolution. In this context we investigate here the use of a neural radiance field view synthesis method, originally developed for its use with macroscopic scenes acquired with a moving (or an array of static) digital camera(s), for its application to the images acquired with a Fourier lightfield microscope. The results obtained and presented in this paper are analyzed in terms of lateral resolution and of continuous and realistic parallax. We show that, in terms of these requirements, the proposed technique works efficiently in the case of the epi-illumination microscopy mode.
Open AccessMachine Learning-Based View Synthesis in Fourier Lightfield Microscopy
Current interest in Fourier lightfield microscopy is increasing, due to its ability to acquire 3D images of thick dynamic samples. This technique is based on simultaneously capturing, in a single shot, and with a monocular setup, a number of orthographic perspective views of 3D microscopic samples. An essential feature of Fourier lightfield microscopy is that the number of acquired views is low, due to the trade-off relationship existing between the number of views and their corresponding lateral resolution. Therefore, it is important to have a tool for the generation of a high number of synthesized view images, without compromising their lateral resolution. In this context we investigate here the use of a neural radiance field view synthesis method, originally developed for its use with macroscopic scenes acquired with a moving (or an array of static) digital camera(s), for its application to the images acquired with a Fourier lightfield microscope. The results obtained and presented in this paper are analyzed in terms of lateral resolution and of continuous and realistic parallax. We show that, in terms of these requirements, the proposed technique works efficiently in the case of the epi-illumination microscopy mode.
- 1 January 2022
- Published by Optica Publishing Group
- p. 3Tu5A.6
The Lightfield Eyepiece: an Add-on for 3D Microscopy
Fourier lightfield microscopy is an emerging technique for real-time acquisition of three-dimensional microscopic samples. Here, we present the lightfield eyepiece, an add-on device capable of converting any conventional microscope to a Fourier lightfield microscope.
- 1 January 2022
- Published by Optica Publishing Group
- p. 3Tu5A.6
The Lightfield Eyepiece: an Add-on for 3D Microscopy
Fourier lightfield microscopy is an emerging technique for real-time acquisition of three-dimensional microscopic samples. Here, we present the lightfield eyepiece, an add-on device capable of converting any conventional microscope to a Fourier lightfield microscope.
- Open Access
The Lightfield Microscope Eyepiece
Lightfield microscopy has raised growing interest in the last few years. Its ability to get three-dimensional information about the sample in a single shot makes it suitable for many applications in which time resolution is fundamental. In this paper we present a novel device, which is capable of converting any conventional microscope into a lightfield microscope. Based on the Fourier integral microscope concept, we designed the lightfield microscope eyepiece. This is coupled to the eyepiece port, to let the user exploit all the host microscope’s components (objective turret, illumination systems, translation stage, etc.) and get a 3D reconstruction of the sample. After the optical design, a proof-of-concept device was built with off-the-shelf optomechanical components. Here, its optical performances are demonstrated, which show good matching with the theoretical ones. Then, the pictures of different samples taken with the lightfield eyepiece are shown, along with the corresponding reconstructions. We demonstrated the functioning of the lightfield eyepiece and lay the foundation for the development of a commercial device that works with any microscope.
Open AccessThe Lightfield Microscope Eyepiece
Lightfield microscopy has raised growing interest in the last few years. Its ability to get three-dimensional information about the sample in a single shot makes it suitable for many applications in which time resolution is fundamental. In this paper we present a novel device, which is capable of converting any conventional microscope into a lightfield microscope. Based on the Fourier integral microscope concept, we designed the lightfield microscope eyepiece. This is coupled to the eyepiece port, to let the user exploit all the host microscope’s components (objective turret, illumination systems, translation stage, etc.) and get a 3D reconstruction of the sample. After the optical design, a proof-of-concept device was built with off-the-shelf optomechanical components. Here, its optical performances are demonstrated, which show good matching with the theoretical ones. Then, the pictures of different samples taken with the lightfield eyepiece are shown, along with the corresponding reconstructions. We demonstrated the functioning of the lightfield eyepiece and lay the foundation for the development of a commercial device that works with any microscope.
- Open Access
Robust Depth Estimation for Light Field Microscopy
Light field technologies have seen a rise in recent years and microscopy is a field where such technology has had a deep impact. The possibility to provide spatial and angular information at the same time and in a single shot brings several advantages and allows for new applications. A common goal in these applications is the calculation of a depth map to reconstruct the three-dimensional geometry of the scene. Many approaches are applicable, but most of them cannot achieve high accuracy because of the nature of such images: biological samples are usually poor in features and do not exhibit sharp colors like natural scene. Due to such conditions, standard approaches result in noisy depth maps. In this work, a robust approach is proposed where accurate depth maps can be produced exploiting the information recorded in the light field, in particular, images produced with Fourier integral Microscope. The proposed approach can be divided into three main parts. Initially, it creates two cost volumes using different focal cues, namely correspondences and defocus. Secondly, it applies filtering methods that exploit multi-scale and super-pixels cost aggregation to reduce noise and enhance the accuracy. Finally, it merges the two cost volumes and extracts a depth map through multi-label optimization.
Open AccessRobust Depth Estimation for Light Field Microscopy
Light field technologies have seen a rise in recent years and microscopy is a field where such technology has had a deep impact. The possibility to provide spatial and angular information at the same time and in a single shot brings several advantages and allows for new applications. A common goal in these applications is the calculation of a depth map to reconstruct the three-dimensional geometry of the scene. Many approaches are applicable, but most of them cannot achieve high accuracy because of the nature of such images: biological samples are usually poor in features and do not exhibit sharp colors like natural scene. Due to such conditions, standard approaches result in noisy depth maps. In this work, a robust approach is proposed where accurate depth maps can be produced exploiting the information recorded in the light field, in particular, images produced with Fourier integral Microscope. The proposed approach can be divided into three main parts. Initially, it creates two cost volumes using different focal cues, namely correspondences and defocus. Secondly, it applies filtering methods that exploit multi-scale and super-pixels cost aggregation to reduce noise and enhance the accuracy. Finally, it merges the two cost volumes and extracts a depth map through multi-label optimization.