Yingzong Jiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yingzong Jiao has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Binbin Li
Harbin Institute of Technology
11 shared publications - Dianguo Xu
Harbin Institute of Technology
9 shared publications - Lianzheng Ding
School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China
3 shared publications - Zhiwen Suo
State Grid Economic and Technological Research Institute Company, Ltd., Beijing, China
3 shared publications - Rui Li
School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China
2 shared publications - Xiaodong Zhao
School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China
2 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (10) , 14337-14349
A Diode Clamped Resonant DC/DC Converter for Solid State Transformer With Inherent Second Harmonic Current Suppression
The solid-state transformer (SST) provides an efficient and compact solution for data center and EV charging applications. However, the intrinsic single-phase structure of AC/DC stage in SST generates the second harmonic current (SHC) on the DC-link. It propagates through the DC/DC stage and causes increased current stress and losses. In this article, the detrimental impact of SHC on the traditional series resonant converter is investigated. Then, a novel SHC suppression method based on the diode-clamped resonant converter (DC-RC) is proposed. The operation principle and impedance characteristic of DC-RC are revealed. Meanwhile, the SHC suppression mechanism, along with its parameter design method, is presented. The SHC in the DC/DC stage can be suppressed automatically without any additional control or power stage. Finally, the validity of the proposed method is verified experimentally on the 18 kW-rated prototype.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (10) , 14337-14349
A Diode Clamped Resonant DC/DC Converter for Solid State Transformer With Inherent Second Harmonic Current Suppression
The solid-state transformer (SST) provides an efficient and compact solution for data center and EV charging applications. However, the intrinsic single-phase structure of AC/DC stage in SST generates the second harmonic current (SHC) on the DC-link. It propagates through the DC/DC stage and causes increased current stress and losses. In this article, the detrimental impact of SHC on the traditional series resonant converter is investigated. Then, a novel SHC suppression method based on the diode-clamped resonant converter (DC-RC) is proposed. The operation principle and impedance characteristic of DC-RC are revealed. Meanwhile, the SHC suppression mechanism, along with its parameter design method, is presented. The SHC in the DC/DC stage can be suppressed automatically without any additional control or power stage. Finally, the validity of the proposed method is verified experimentally on the 18 kW-rated prototype.
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (8) , 14051-14067
Trapezoidal Wave Operation of T-Type DC/DC Converter for High-Power Applications
All-DC collection and transmission is a promising solution for integration of large-scale renewable energy in desert and deep-sea areas. High-power DC/DC converter is the key equipment in this all-DC system. However, current T-type DC/DC converter (T-DC) based on modular multilevel technology faces high current stress and limited power capacity. In this paper, trapezoidal wave operation of T-DC is proposed to reduce device current stress and thus increase power capacity. Waveform constraints are clarified, and both symmetrical trapezoidal wave (STW) and asymmetrical trapezoidal wave (ATW) operation are proposed. Compared with the traditional sinusoidal wave operation, the proposed STW and ATW operation both offer higher power capacity, reduced capacitor energy storage, and improved efficiency in a wide voltage ratio range. The advantages of ATW become more pronounced at higher voltage ratios. In addition, to mitigate significant fundamental-frequency current ripple on the DC side caused by unbalanced T-DC losses between phases, an arm energy balance method based on internal AC and DC voltage regulation is proposed, eliminating the ripple without the need for a DC filter. The detailed analysis, control schemes, simulation results, and scale-down prototype are provided to validate the effectiveness of proposed trapezoidal wave operation method.
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (8) , 14051-14067
Trapezoidal Wave Operation of T-Type DC/DC Converter for High-Power Applications
All-DC collection and transmission is a promising solution for integration of large-scale renewable energy in desert and deep-sea areas. High-power DC/DC converter is the key equipment in this all-DC system. However, current T-type DC/DC converter (T-DC) based on modular multilevel technology faces high current stress and limited power capacity. In this paper, trapezoidal wave operation of T-DC is proposed to reduce device current stress and thus increase power capacity. Waveform constraints are clarified, and both symmetrical trapezoidal wave (STW) and asymmetrical trapezoidal wave (ATW) operation are proposed. Compared with the traditional sinusoidal wave operation, the proposed STW and ATW operation both offer higher power capacity, reduced capacitor energy storage, and improved efficiency in a wide voltage ratio range. The advantages of ATW become more pronounced at higher voltage ratios. In addition, to mitigate significant fundamental-frequency current ripple on the DC side caused by unbalanced T-DC losses between phases, an arm energy balance method based on internal AC and DC voltage regulation is proposed, eliminating the ripple without the need for a DC filter. The detailed analysis, control schemes, simulation results, and scale-down prototype are provided to validate the effectiveness of proposed trapezoidal wave operation method.
- 18 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (5) , 5578-5590
A Series Resonant DC/DC Converter With Certain DC Voltage Gain Adjustment Capability for Renewable Energy MVdc Collection
Medium voltage direct current (MVDC) collection is a promising approach for integration of large-scale renewables. This paper proposes a series resonant DC/DC converter for MVDC collection with certain DC voltage gain adjustment capability. By adding an auxiliary half-bridge and a low-insulation-level auxiliary transformer to the traditional series resonant DC/DC converter, the proposed converter allows flexible voltage gain adjustment. All semiconductor devices in the system can achieve soft switching over the entire voltage and power range, resulting in high operation efficiency. The analysis includes a detailed examination of the plane trajectory to assess device stresses, voltage gain, and design methods for resonant parameters. Simulation results validate the proposed approach, and the experimental results from a scaled down prototype further proves the effectiveness.
- 18 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (5) , 5578-5590
A Series Resonant DC/DC Converter With Certain DC Voltage Gain Adjustment Capability for Renewable Energy MVdc Collection
Medium voltage direct current (MVDC) collection is a promising approach for integration of large-scale renewables. This paper proposes a series resonant DC/DC converter for MVDC collection with certain DC voltage gain adjustment capability. By adding an auxiliary half-bridge and a low-insulation-level auxiliary transformer to the traditional series resonant DC/DC converter, the proposed converter allows flexible voltage gain adjustment. All semiconductor devices in the system can achieve soft switching over the entire voltage and power range, resulting in high operation efficiency. The analysis includes a detailed examination of the plane trajectory to assess device stresses, voltage gain, and design methods for resonant parameters. Simulation results validate the proposed approach, and the experimental results from a scaled down prototype further proves the effectiveness.
- 2 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (8) , 11598-11615
Bidirectional Hybrid Isolated DC Transformer for All-DC Collection and Transmission System
Bidirectional dc transformer (DCT) is the key energy conversion equipment for all-dc collection and transmission system. Cost, efficiency, and dc fault blocking capability are important considerations that are currently difficult to address simultaneously for the existing modular multilevel converter (MMC) based DCT. In this article, a bidirectional hybrid isolated dc transformer (BHIT) as an alternative to the existing MMC based DCT is proposed. By replacing half of the submodules (SMs) by antiparalleled thyristors, the proposed BHIT can reduce 36.7% device cost, 32.5% device loss, and 64.8% total SM capacitance compared with the existing MMC based DCTs. By tailoring the trapezoidal waveforms of the thyristors, continuous dc currents are ensured without any filtering effort. In addition, an active fault current limiting control is further proposed to reduce the fault current during short-circuit faults. The detailed operational analysis, control schemes, simulation results, and scale-down prototype are provided to validate the effectiveness of proposed topology.
- 2 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (8) , 11598-11615
Bidirectional Hybrid Isolated DC Transformer for All-DC Collection and Transmission System
Bidirectional dc transformer (DCT) is the key energy conversion equipment for all-dc collection and transmission system. Cost, efficiency, and dc fault blocking capability are important considerations that are currently difficult to address simultaneously for the existing modular multilevel converter (MMC) based DCT. In this article, a bidirectional hybrid isolated dc transformer (BHIT) as an alternative to the existing MMC based DCT is proposed. By replacing half of the submodules (SMs) by antiparalleled thyristors, the proposed BHIT can reduce 36.7% device cost, 32.5% device loss, and 64.8% total SM capacitance compared with the existing MMC based DCTs. By tailoring the trapezoidal waveforms of the thyristors, continuous dc currents are ensured without any filtering effort. In addition, an active fault current limiting control is further proposed to reduce the fault current during short-circuit faults. The detailed operational analysis, control schemes, simulation results, and scale-down prototype are provided to validate the effectiveness of proposed topology.
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (5) , 6963-6976
A High-Power MVAC-LVDC Rectifier Empowering Wide Voltage Range Operation
The increasing demand for DC power loads across various applications such as railway systems, data centers, electric vehicle charging stations, and hydrogen electrolyzers necessitates efficient rectifiers capable of converting medium-voltage AC (MVAC) to low-voltage DC (LVDC) while accommodating a wide DC voltage range. This paper presents a novel high-power MVAC-LVDC rectifier that integrates submodule (SM) arms, thyristors, a monolithic medium-frequency transformer (MMFT), and a diode bridge. The SM arms enable precise control over thyristors commutation, MVAC current, and DC current, while maintaining high waveform quality on both MVAC and LVDC sides. By adjusting the arm voltage, the rectifier can achieve a wide DC voltage range from zero to its rated value. Compared to the conventional solid-state transformer (SST), the use of MMFT and low-loss thyristors reduces the number of high-insulation transformers and IGBTs, enhancing both cost-effectiveness and efficiency with a 30% reduction in loss and a 24% decrease in cost The performance of the rectifier is validated through simulation at 6MW and experimental testing with a 3kW scale-down prototype.
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (5) , 6963-6976
A High-Power MVAC-LVDC Rectifier Empowering Wide Voltage Range Operation
The increasing demand for DC power loads across various applications such as railway systems, data centers, electric vehicle charging stations, and hydrogen electrolyzers necessitates efficient rectifiers capable of converting medium-voltage AC (MVAC) to low-voltage DC (LVDC) while accommodating a wide DC voltage range. This paper presents a novel high-power MVAC-LVDC rectifier that integrates submodule (SM) arms, thyristors, a monolithic medium-frequency transformer (MMFT), and a diode bridge. The SM arms enable precise control over thyristors commutation, MVAC current, and DC current, while maintaining high waveform quality on both MVAC and LVDC sides. By adjusting the arm voltage, the rectifier can achieve a wide DC voltage range from zero to its rated value. Compared to the conventional solid-state transformer (SST), the use of MMFT and low-loss thyristors reduces the number of high-insulation transformers and IGBTs, enhancing both cost-effectiveness and efficiency with a 30% reduction in loss and a 24% decrease in cost The performance of the rectifier is validated through simulation at 6MW and experimental testing with a 3kW scale-down prototype.
- 18 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 5412-5422
An Interline HVDC Power Flow Controller Based on Energy-Exchanging Arm
Meshed HVDC grid is instrumental in enhancing transmission capability and mitigating power fluctuations of renewable power generations. However, meshed dc grid cannot fully regulate the current flow through each line. To address the problem, this article presents a novel design for dc power flow controller (DCPFC) that enhances power flow control capability of meshed HVDC grid while minimizing the use of semiconductors. Benefits could be especially valuable in multiport applications. The circuit structure, operating waveforms, parameters, and control design are presented. The start process of the proposed DCPFC is also introduced. Simulation results and downscaled experimental tests are performed for demonstrating the effectiveness of the proposed topology.
- 18 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 5412-5422
An Interline HVDC Power Flow Controller Based on Energy-Exchanging Arm
Meshed HVDC grid is instrumental in enhancing transmission capability and mitigating power fluctuations of renewable power generations. However, meshed dc grid cannot fully regulate the current flow through each line. To address the problem, this article presents a novel design for dc power flow controller (DCPFC) that enhances power flow control capability of meshed HVDC grid while minimizing the use of semiconductors. Benefits could be especially valuable in multiport applications. The circuit structure, operating waveforms, parameters, and control design are presented. The start process of the proposed DCPFC is also introduced. Simulation results and downscaled experimental tests are performed for demonstrating the effectiveness of the proposed topology.
- 30 November 2024
- Published by Springer Nature
- p. 539-547
A High Current Bidirectional DC/DC Converter with Fault Blocking Ability
- 30 November 2024
- Published by Springer Nature
- p. 539-547
A High Current Bidirectional DC/DC Converter with Fault Blocking Ability
- 30 November 2024
- Published by Springer Nature
- p. 564-572
Harmonics Coupling Stability Analysis of Grid-Forming Wind Farms Interconnected with MMC-HVDC
- 30 November 2024
- Published by Springer Nature
- p. 564-572
Harmonics Coupling Stability Analysis of Grid-Forming Wind Farms Interconnected with MMC-HVDC
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 1183-1197
High-Voltage DC/DC Converter Topology With Active Filtering Arms
The rapid growth of renewable energy installation promotes the development of high voltage direct current (HVdc) links for energy integration and transmission. To meet the future needs of HVdc grids, high-voltage dc–dc converters are needed to interconnect HVdc links with different voltage levels. This article proposes a high-voltage active filtering dc–dc converter composed of only one energy buffering arm to transfer energy and two active filtering arms for dc current continuity. This topology features low cost and small footprint. The circuit configuration, operation principle, parameter design, and control strategies are presented. Particularly, the decoupling control is proposed to solve the coupling among energy balance control of different arms. Both the simulation case of 100 MW, 200 kV/320 kV, and downscaled experimental results of 1.5 kW, 150 V/300 V are provided to demonstrate the validity of the proposed topology. Furthermore, a series of dc–dc topologies with active filtering principle are derived and evaluated.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 1183-1197
High-Voltage DC/DC Converter Topology With Active Filtering Arms
The rapid growth of renewable energy installation promotes the development of high voltage direct current (HVdc) links for energy integration and transmission. To meet the future needs of HVdc grids, high-voltage dc–dc converters are needed to interconnect HVdc links with different voltage levels. This article proposes a high-voltage active filtering dc–dc converter composed of only one energy buffering arm to transfer energy and two active filtering arms for dc current continuity. This topology features low cost and small footprint. The circuit configuration, operation principle, parameter design, and control strategies are presented. Particularly, the decoupling control is proposed to solve the coupling among energy balance control of different arms. Both the simulation case of 100 MW, 200 kV/320 kV, and downscaled experimental results of 1.5 kW, 150 V/300 V are provided to demonstrate the validity of the proposed topology. Furthermore, a series of dc–dc topologies with active filtering principle are derived and evaluated.
- 20 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 1991-2004
Isolated MVdc-HVdc-AC Three-Port Power Router for High-Power Large-Scale PV Applications
This article proposes an isolated three-port power router (TP-PR) for medium-voltage (MV) dc collection of large-scale photovoltaic applications with a portion of ac power integration. By combining the modular multilevel converter (MMC) with thyristor valves through integrated transformers, not only the MVdc-side installed semiconductor capacity is reduced but also the requirement for MV-side submodule (SM) capacitor is eliminated. Particularly, the MMC utilizes high-frequency current for MV dc power transfer, effectively minimizing the requirement for SM capacitance. Moreover, the low on -state voltage drop of thyristors, along with zero-voltage switching and zero-current switching techniques, ensures low conversion loss for TP-PR. Compared with the traditional isolated three-port topology, TP-PR can reduce semiconductor cost by 22%, SM capacitance energy storage by 49%, and conversion loss by 50%. The operation principle, key parameters design, and multiport control strategy are introduced in detail. The effectiveness and the theoretical analysis have been confirmed by both simulation and experimental results.
- 20 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 1991-2004
Isolated MVdc-HVdc-AC Three-Port Power Router for High-Power Large-Scale PV Applications
This article proposes an isolated three-port power router (TP-PR) for medium-voltage (MV) dc collection of large-scale photovoltaic applications with a portion of ac power integration. By combining the modular multilevel converter (MMC) with thyristor valves through integrated transformers, not only the MVdc-side installed semiconductor capacity is reduced but also the requirement for MV-side submodule (SM) capacitor is eliminated. Particularly, the MMC utilizes high-frequency current for MV dc power transfer, effectively minimizing the requirement for SM capacitance. Moreover, the low on -state voltage drop of thyristors, along with zero-voltage switching and zero-current switching techniques, ensures low conversion loss for TP-PR. Compared with the traditional isolated three-port topology, TP-PR can reduce semiconductor cost by 22%, SM capacitance energy storage by 49%, and conversion loss by 50%. The operation principle, key parameters design, and multiport control strategy are introduced in detail. The effectiveness and the theoretical analysis have been confirmed by both simulation and experimental results.