Sergii Aksonov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sergii Aksonov has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Artur Onyshchenko
National Transport University
5 shared publications - Anna Miniukova
National Transport University (NTU), Kyiv, Ukraine
3 shared publications - Bolislav Vyshnivskyi2 shared publications
- Denys Volodymyrovych Trudenko
National Transport University
2 shared publications - Nataliia Chyzhenko2 shared publications
- Volodymyr Voskoboinick
Institute of Hydromechanics of the National Academy of Sciences of Ukraine
2 shared publications
Latest Publications
- Open Access
- 9 November 2026
- Published by Ukrainian State University of Science and Technologies in Bridges and tunnels: Theory, Research, Practice
- No. 30,p. 73-79
Analysis of the effectiveness of BIM technologies in the construction of buildings, bridges, and highways
Purpose. The objective is to investigate whether the use of BIM modeling in bridge construction in Ukraine meets the actual needs of the bridge life cycle. Methodology. A comparative analysis of the effectiveness of BIM technologies in industrial and civil engineering, bridge construction, and road construction was conducted, taking into account the specific characteristics of the structures, the complexity of design solutions, the need for coordination, the automation of work volume estimation, and the provision of information for operation. Findings. It has been established that BIM is most effective during the design of complex structures with a large number of interrelated elements. For industrial and civil construction, the main advantage is the coordination of structural and engineering systems; for bridges, it is the modeling of complex geometry, structural elements, and the sequence of work; and for highways, it is the integration of design solutions with data on topography, alignment, and earthwork. At the same time, it has been demonstrated that the need for BIM modeling is not fixed and depends on the type of project and the primary objective: ensuring the quality of design solutions, coordinating project participants, digitizing project documentation, or providing information support for the project throughout its life cycle. Originality. The scientific novelty of this study lies in the systematization of criteria for assessing the feasibility of BIM technologies for various types of construction projects. The paper justifies the need for a differentiated approach to BIM, in which the level of model detail, the composition of information data, and the depth of digitization are determined not only by the type of structure but also by its structural complexity, the scale of work, the number of interrelated elements, and the requirements for subsequent operation. Practical value. The practical significance of this study lies in developing an approach to selecting the optimal level of BIM implementation depending on the type of facility, its life cycle stage, and specific engineering tasks.
- 9 November 2026
- Published by Ukrainian State University of Science and Technologies in Bridges and tunnels: Theory, Research, Practice
- No. 30,p. 73-79
Open AccessAnalysis of the effectiveness of BIM technologies in the construction of buildings, bridges, and highways
Purpose. The objective is to investigate whether the use of BIM modeling in bridge construction in Ukraine meets the actual needs of the bridge life cycle. Methodology. A comparative analysis of the effectiveness of BIM technologies in industrial and civil engineering, bridge construction, and road construction was conducted, taking into account the specific characteristics of the structures, the complexity of design solutions, the need for coordination, the automation of work volume estimation, and the provision of information for operation. Findings. It has been established that BIM is most effective during the design of complex structures with a large number of interrelated elements. For industrial and civil construction, the main advantage is the coordination of structural and engineering systems; for bridges, it is the modeling of complex geometry, structural elements, and the sequence of work; and for highways, it is the integration of design solutions with data on topography, alignment, and earthwork. At the same time, it has been demonstrated that the need for BIM modeling is not fixed and depends on the type of project and the primary objective: ensuring the quality of design solutions, coordinating project participants, digitizing project documentation, or providing information support for the project throughout its life cycle. Originality. The scientific novelty of this study lies in the systematization of criteria for assessing the feasibility of BIM technologies for various types of construction projects. The paper justifies the need for a differentiated approach to BIM, in which the level of model detail, the composition of information data, and the depth of digitization are determined not only by the type of structure but also by its structural complexity, the scale of work, the number of interrelated elements, and the requirements for subsequent operation. Practical value. The practical significance of this study lies in developing an approach to selecting the optimal level of BIM implementation depending on the type of facility, its life cycle stage, and specific engineering tasks.
- 23 October 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (34) , 195-202
Study of BIM technology application at the reconstruction site of the international road border crossing point “Yahodyn–Dorohusk”
The article examines the practical application of Building Information Modeling technology during the design and construction of the international road border crossing point “Yahodyn–Dorohusk”. The aim of the study is to identify the advantages of using a digital information model compared with the traditional design approach and to determine the possibilities for its direct use during construction works. The study is based on an analysis of the design organization, the structure of digital models, the processes of storing and exchanging project information, and the practical application of digital surfaces during the construction of additional structures and parking areas. It was established that the use of an interconnected digital model facilitates the coordination of individual project components, thereby reducing the amount of manual adjustment of documentation and minimizing the risk of inconsistencies. The creation of a common information environment provides version and status control, as well as access to up-to-date project information. During the construction stage, digital surfaces are used to determine design points and organize earthworks. The actual parameters of the works being performed are verified using geodetic and operational methods. The results confirm the practical feasibility of using a digital information model not only for design purposes but also for information support of the construction process.
- 23 October 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (34) , 195-202
Study of BIM technology application at the reconstruction site of the international road border crossing point “Yahodyn–Dorohusk”
The article examines the practical application of Building Information Modeling technology during the design and construction of the international road border crossing point “Yahodyn–Dorohusk”. The aim of the study is to identify the advantages of using a digital information model compared with the traditional design approach and to determine the possibilities for its direct use during construction works. The study is based on an analysis of the design organization, the structure of digital models, the processes of storing and exchanging project information, and the practical application of digital surfaces during the construction of additional structures and parking areas. It was established that the use of an interconnected digital model facilitates the coordination of individual project components, thereby reducing the amount of manual adjustment of documentation and minimizing the risk of inconsistencies. The creation of a common information environment provides version and status control, as well as access to up-to-date project information. During the construction stage, digital surfaces are used to determine design points and organize earthworks. The actual parameters of the works being performed are verified using geodetic and operational methods. The results confirm the practical feasibility of using a digital information model not only for design purposes but also for information support of the construction process.
- Open Access
- 26 December 2025
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 214,p. 63-74
DETERMINATION OF DAMAGE LEVEL IN CEMENT CONCRETE PAVEMENT ON REINFORCED CONCRETE SLAB OF ROADWAY ON HIGHWAY BRIDGES
At present, there are no established approaches for determining the extent of damage to cement concrete pavement on reinforced concrete slabs of highway bridge roadways, which poses an urgent issue in the design of cement concrete pavement. The problem of safe operation of bridges has become critical in the past decade due to a number of unfavorable factors. The current maintenance system does not comply with modern technical standards and lacks the necessary resources for proper and timely maintenance of structures. Additionally, the funding system for Ukraine's road network does not allow the use of modern and innovative technologies in bridge operation and construction. Ukraine lacks a clear strategic plan for the improvement, maintenance, and operation of highway bridges. With increasing transport load parameters and abnormally high summer temperatures, defects in the asphalt concrete pavement of reinforced concrete highway bridges have become widespread, hindering the safe operation of these structures. The condition of pavement on highway bridges-and of the bridges as a whole-remains a pressing issue, as they are an integral part of the national road network. The main challenge in the operation of cement concrete pavement on reinforced concrete highway bridges is the reduction of service life due to crack formation. Global trends and the direction of current research indicate a rapid development in the construction of rigid-type roads and cement concrete pavement on reinforced concrete bridges. Therefore, there is an urgent need to study and investigate the construction and maintenance of such pavement on bridges in Ukraine. This article addresses the determination of the extent of damage to cement concrete pavement on the reinforced concrete slab of a highway bridge roadway caused by tensile stresses resulting from the action of vehicle pneumatic wheels. It also examines damage caused by thermal stresses due to daily and seasonal temperature fluctuations.
- 26 December 2025
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 214,p. 63-74
Open AccessDETERMINATION OF DAMAGE LEVEL IN CEMENT CONCRETE PAVEMENT ON REINFORCED CONCRETE SLAB OF ROADWAY ON HIGHWAY BRIDGES
At present, there are no established approaches for determining the extent of damage to cement concrete pavement on reinforced concrete slabs of highway bridge roadways, which poses an urgent issue in the design of cement concrete pavement. The problem of safe operation of bridges has become critical in the past decade due to a number of unfavorable factors. The current maintenance system does not comply with modern technical standards and lacks the necessary resources for proper and timely maintenance of structures. Additionally, the funding system for Ukraine's road network does not allow the use of modern and innovative technologies in bridge operation and construction. Ukraine lacks a clear strategic plan for the improvement, maintenance, and operation of highway bridges. With increasing transport load parameters and abnormally high summer temperatures, defects in the asphalt concrete pavement of reinforced concrete highway bridges have become widespread, hindering the safe operation of these structures. The condition of pavement on highway bridges-and of the bridges as a whole-remains a pressing issue, as they are an integral part of the national road network. The main challenge in the operation of cement concrete pavement on reinforced concrete highway bridges is the reduction of service life due to crack formation. Global trends and the direction of current research indicate a rapid development in the construction of rigid-type roads and cement concrete pavement on reinforced concrete bridges. Therefore, there is an urgent need to study and investigate the construction and maintenance of such pavement on bridges in Ukraine. This article addresses the determination of the extent of damage to cement concrete pavement on the reinforced concrete slab of a highway bridge roadway caused by tensile stresses resulting from the action of vehicle pneumatic wheels. It also examines damage caused by thermal stresses due to daily and seasonal temperature fluctuations.
- 1 January 2025
- Published by National Transport University in Automobile Roads and Road Construction
- No. 117.2
METHOD OF ASSESSMENT OF LIQUID MASS LEAKAGE IN THE PIPELINE DURING OPERATION
Summary. During the development of the documents stipulated by the Law of Ukraine "On Objects of Increased Danger" there was a need to calculate the amount of ammonia that can take part in an emergency situation during an accident on the linear part of the ammonia pipeline. Regulatory documents provide for the consideration of the case of an emergency situation with a guillotine rupture of the pipeline. The total mass of the hazardous substance involved in the accident is calculated as the total mass contained in the linear part of the pipeline between two shut-off devices and the total mass that can be released during the time established to detect the leakage of the substance and implement the closure of the shut-off devices. It is necessary to calculate the mass of ammonia that can be released in the forward and reverse direction during the time established to detect the leakage of the substance and implement the closing of the shut-off devices. The total mass of the hazardous substance after the accident of the section of the ammonia pipeline was determined as the total mass in the linear part of the pipeline between two shut-off devices, and the total mass that can be released during the time established to detect the leakage of the substance and implement the closure of the shut-off devices according to the guillotine gap scheme. Keywords: ammonia pipeline accidents, guillotine rupture, thermohydrodynamic flow theory, hydraulic approximation.
- 1 January 2025
- Published by National Transport University in Automobile Roads and Road Construction
- No. 117.2
METHOD OF ASSESSMENT OF LIQUID MASS LEAKAGE IN THE PIPELINE DURING OPERATION
Summary. During the development of the documents stipulated by the Law of Ukraine "On Objects of Increased Danger" there was a need to calculate the amount of ammonia that can take part in an emergency situation during an accident on the linear part of the ammonia pipeline. Regulatory documents provide for the consideration of the case of an emergency situation with a guillotine rupture of the pipeline. The total mass of the hazardous substance involved in the accident is calculated as the total mass contained in the linear part of the pipeline between two shut-off devices and the total mass that can be released during the time established to detect the leakage of the substance and implement the closure of the shut-off devices. It is necessary to calculate the mass of ammonia that can be released in the forward and reverse direction during the time established to detect the leakage of the substance and implement the closing of the shut-off devices. The total mass of the hazardous substance after the accident of the section of the ammonia pipeline was determined as the total mass in the linear part of the pipeline between two shut-off devices, and the total mass that can be released during the time established to detect the leakage of the substance and implement the closure of the shut-off devices according to the guillotine gap scheme. Keywords: ammonia pipeline accidents, guillotine rupture, thermohydrodynamic flow theory, hydraulic approximation.
- 1 January 2025
- Published by National Transport University in Automobile Roads and Road Construction
- No. 117.2
RESEARCH OF THE TECHNICAL CONDITION OF REINFORCED CONCRETE SPAN STRUCTURES OF ROAD BRIDGES IN UKRAINE
The article is dedicated to analyzing the technical condition of reinforced concrete superstructures of road bridges in Ukraine, identifying key degradation factors, and substantiating the necessity of strengthening measures to improve their durability and reliability. The study highlights the growing problem of aging bridge infrastructure, focusing on corrosion, fatigue damage, and material wear as primary causes of structural deterioration. Particular attention is given to the consequences of exceeding the design service life and the associated risks for traffic safety. Objective. To conduct a comprehensive analysis of the current state of reinforced concrete superstructures of road bridges in Ukraine, determine the main degradation factors, and justify the necessity of strengthening superstructure elements to enhance their durability and reliability. Methodology. The research is based on the analysis of statistical data on bridge conditions, case studies of structural failures, and theoretical modeling of degradation processes. Particular emphasis is placed on the impact of corrosion on reinforcement, fatigue-induced cracks, and load-bearing capacity reduction. Advanced diagnostic techniques, including non-destructive testing and computational simulations, are considered to assess structural integrity accurately. Results. The study establishes that a significant proportion of reinforced concrete superstructures requires urgent strengthening due to critical loss of load-bearing capacity. It is revealed that many bridges, built in the mid-20th century, no longer meet modern operational and safety requirements. The findings indicate that fatigue damage and stress accumulation in structural elements are not sufficiently studied, necessitating further research into failure mechanisms. The analysis suggests that implementing innovative reinforcement techniques, such as external adaptive tensioning, could significantly extend the service life of aging bridge structures. Conclusion. Addressing the problem of aging reinforced concrete superstructures is crucial for ensuring road safety and prolonging the operational lifespan of bridges. The study underscores the importance of timely strengthening interventions, considering modern material technologies and advanced structural monitoring methods. Further research into fatigue properties and degradation mechanisms will provide valuable insights for developing effective rehabilitation strategies. Keywords: Reinforced concrete superstructures, structural durability, fatigue damage, service life, technical condition.
- 1 January 2025
- Published by National Transport University in Automobile Roads and Road Construction
- No. 117.2
RESEARCH OF THE TECHNICAL CONDITION OF REINFORCED CONCRETE SPAN STRUCTURES OF ROAD BRIDGES IN UKRAINE
The article is dedicated to analyzing the technical condition of reinforced concrete superstructures of road bridges in Ukraine, identifying key degradation factors, and substantiating the necessity of strengthening measures to improve their durability and reliability. The study highlights the growing problem of aging bridge infrastructure, focusing on corrosion, fatigue damage, and material wear as primary causes of structural deterioration. Particular attention is given to the consequences of exceeding the design service life and the associated risks for traffic safety. Objective. To conduct a comprehensive analysis of the current state of reinforced concrete superstructures of road bridges in Ukraine, determine the main degradation factors, and justify the necessity of strengthening superstructure elements to enhance their durability and reliability. Methodology. The research is based on the analysis of statistical data on bridge conditions, case studies of structural failures, and theoretical modeling of degradation processes. Particular emphasis is placed on the impact of corrosion on reinforcement, fatigue-induced cracks, and load-bearing capacity reduction. Advanced diagnostic techniques, including non-destructive testing and computational simulations, are considered to assess structural integrity accurately. Results. The study establishes that a significant proportion of reinforced concrete superstructures requires urgent strengthening due to critical loss of load-bearing capacity. It is revealed that many bridges, built in the mid-20th century, no longer meet modern operational and safety requirements. The findings indicate that fatigue damage and stress accumulation in structural elements are not sufficiently studied, necessitating further research into failure mechanisms. The analysis suggests that implementing innovative reinforcement techniques, such as external adaptive tensioning, could significantly extend the service life of aging bridge structures. Conclusion. Addressing the problem of aging reinforced concrete superstructures is crucial for ensuring road safety and prolonging the operational lifespan of bridges. The study underscores the importance of timely strengthening interventions, considering modern material technologies and advanced structural monitoring methods. Further research into fatigue properties and degradation mechanisms will provide valuable insights for developing effective rehabilitation strategies. Keywords: Reinforced concrete superstructures, structural durability, fatigue damage, service life, technical condition.
- 1 January 2025
- Published by National Transport University in Automobile Roads and Road Construction
- No. 117.2
SOIL ERASING DURING GROUP PLACEMENT OF BRIDGE SUPPORTS
Summary. Introduction. Scour is one of the causes of the destruction of hydraulic structures, which is formed under the action of junction flow near bluff bodies, which occurs during the construction and operation of bridge crossings over water obstacles, during the installation of drilling supports and foundations of wind power plants in the shelf zone, and the construction of mooring structures on the ground. In this regard, a significant number of experimental and theoretical studies aimed at studying the phenomenon of local scour and developing means and methods for its reduction, which is extremely relevant. Problem Statement. The process of formation of scour holes near bluff bodies installed on erosive soil is due to the formation and further development of a system of horseshoe vortex structures and wake vortices that are formed around the streamlined structure near its connection with the bottom. The main mechanism responsible for the formation and development of the scour hole includes a flow directed to the bottom in the front or frontal part of the pier, together with the formation of a system of horseshoe vortex structures near the base of the pier and wake vortices that break away from the pier surface. Purpose. The purpose of the work is to determine the features of scour during the group arrangement of bridge piers using laboratory experimental researches. Materials and methods. Experimental researches of the features of scour formation during the group arrangement of piers of two bridge crossings, which were in the wake of each other, were carried out on models of piers in laboratory conditions in a hydrodynamic channel using visual and instrumental research methods. Hydrodynamic characteristics of vortex and jet flows were obtained using specially designed and manufactured velocity and pressure sensors, and the parameters and shape of scour holes were determined using scour depth sensors. Results. Experimental researches allowed to determine the features of scour formation around the group structure of bridge piers. Profiles of local scour in front of the frontal part of the prismatic pier were obtained depending on the junction flow velocity, flow depth and Froude numbers for the single arrangement of the piers of the upper streamlined bridge crossing and the joint arrangement of the piers of two bridge crossings. The features of the formation of scour and alluvium near bridge crossing piers in an axonometric representation are presented. Conclusions. As a result of the research, it was established that the mutual arrangement of the models of the piers of two bridge crossings leads to significant changes in the scour in front of the prismatic piers of the first streamlined bridge crossing. Thus, the local scour increased by 15% at supercritical flow velocities in shallow water and decreased by almost 20% at subcritical velocities in deep water. It is shown that the scour profiles have two characteristic sections with different angles of inclination of the front surface of the scour hole, which are due to the formation of two systems of quasi-stable large-scale horseshoe vortex structures. Keywords: local scour, prismatic pier, three-row grillage, horseshoe vortex, scour profile, bridge crossing
- 1 January 2025
- Published by National Transport University in Automobile Roads and Road Construction
- No. 117.2
SOIL ERASING DURING GROUP PLACEMENT OF BRIDGE SUPPORTS
Summary. Introduction. Scour is one of the causes of the destruction of hydraulic structures, which is formed under the action of junction flow near bluff bodies, which occurs during the construction and operation of bridge crossings over water obstacles, during the installation of drilling supports and foundations of wind power plants in the shelf zone, and the construction of mooring structures on the ground. In this regard, a significant number of experimental and theoretical studies aimed at studying the phenomenon of local scour and developing means and methods for its reduction, which is extremely relevant. Problem Statement. The process of formation of scour holes near bluff bodies installed on erosive soil is due to the formation and further development of a system of horseshoe vortex structures and wake vortices that are formed around the streamlined structure near its connection with the bottom. The main mechanism responsible for the formation and development of the scour hole includes a flow directed to the bottom in the front or frontal part of the pier, together with the formation of a system of horseshoe vortex structures near the base of the pier and wake vortices that break away from the pier surface. Purpose. The purpose of the work is to determine the features of scour during the group arrangement of bridge piers using laboratory experimental researches. Materials and methods. Experimental researches of the features of scour formation during the group arrangement of piers of two bridge crossings, which were in the wake of each other, were carried out on models of piers in laboratory conditions in a hydrodynamic channel using visual and instrumental research methods. Hydrodynamic characteristics of vortex and jet flows were obtained using specially designed and manufactured velocity and pressure sensors, and the parameters and shape of scour holes were determined using scour depth sensors. Results. Experimental researches allowed to determine the features of scour formation around the group structure of bridge piers. Profiles of local scour in front of the frontal part of the prismatic pier were obtained depending on the junction flow velocity, flow depth and Froude numbers for the single arrangement of the piers of the upper streamlined bridge crossing and the joint arrangement of the piers of two bridge crossings. The features of the formation of scour and alluvium near bridge crossing piers in an axonometric representation are presented. Conclusions. As a result of the research, it was established that the mutual arrangement of the models of the piers of two bridge crossings leads to significant changes in the scour in front of the prismatic piers of the first streamlined bridge crossing. Thus, the local scour increased by 15% at supercritical flow velocities in shallow water and decreased by almost 20% at subcritical velocities in deep water. It is shown that the scour profiles have two characteristic sections with different angles of inclination of the front surface of the scour hole, which are due to the formation of two systems of quasi-stable large-scale horseshoe vortex structures. Keywords: local scour, prismatic pier, three-row grillage, horseshoe vortex, scour profile, bridge crossing
- Open Access
- 28 August 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (5 (130)) , 45-56
Establishing patterns of change in the coefficients of reflection, transmission, and dissipation of wave energy depending on parameters of a permeable vertical wall
The object of research is permeable vertical walls (breakwaters) with different degrees of permeability. This paper reports the results of experimental research into the interaction of gravity waves with models of permeable vertical walls (breakwaters), which were formed from cylindrical piles of circular cross-section. With the help of visual and instrumental studies, the features of interaction of surface gravity waves with permeable vertical walls of different permeability have been identified. The degree of wave transformation by these walls was also determined in the form of reflection, transmission, and dissipation coefficients of wave energy. It was established that with a decrease in the permeability of the vertical wall and an increase in the steepness of the initial wave and a decrease in its period, the height of the reflected wave increased. The pattern of the transmitted wave height had the opposite trend. It was determined that the wave reflection coefficient increased with a decrease in the permeability of the vertical wall and the steepness of the initial wave. The wave transmission coefficient had the opposite trend, namely, it increased with increasing wall permeability and with decreasing steepness of the initial wave. The gravity wave energy dissipation coefficient decreased with increasing vertical wall permeability, but for waves with a significant steepness hi/λ>0.038, a decrease in the wave energy dissipation coefficient was observed for walls with low permeability and the appearance of extreme values of this coefficient. Thus, features in the interaction of surface gravity waves with permeable vertical walls (breakwaters) of different permeability have been researched and the degree of wave transformation by these walls has been determined, which could make it possible to effectively design and operate permeable vertical walls as coastal protection structures
- 28 August 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (5 (130)) , 45-56
Open AccessEstablishing patterns of change in the coefficients of reflection, transmission, and dissipation of wave energy depending on parameters of a permeable vertical wall
The object of research is permeable vertical walls (breakwaters) with different degrees of permeability. This paper reports the results of experimental research into the interaction of gravity waves with models of permeable vertical walls (breakwaters), which were formed from cylindrical piles of circular cross-section. With the help of visual and instrumental studies, the features of interaction of surface gravity waves with permeable vertical walls of different permeability have been identified. The degree of wave transformation by these walls was also determined in the form of reflection, transmission, and dissipation coefficients of wave energy. It was established that with a decrease in the permeability of the vertical wall and an increase in the steepness of the initial wave and a decrease in its period, the height of the reflected wave increased. The pattern of the transmitted wave height had the opposite trend. It was determined that the wave reflection coefficient increased with a decrease in the permeability of the vertical wall and the steepness of the initial wave. The wave transmission coefficient had the opposite trend, namely, it increased with increasing wall permeability and with decreasing steepness of the initial wave. The gravity wave energy dissipation coefficient decreased with increasing vertical wall permeability, but for waves with a significant steepness hi/λ>0.038, a decrease in the wave energy dissipation coefficient was observed for walls with low permeability and the appearance of extreme values of this coefficient. Thus, features in the interaction of surface gravity waves with permeable vertical walls (breakwaters) of different permeability have been researched and the degree of wave transformation by these walls has been determined, which could make it possible to effectively design and operate permeable vertical walls as coastal protection structures