Denys Volodymyrovych Trudenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Denys Volodymyrovych Trudenko has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Volodymyr Voskoboinick
Institute of Hydromechanics of the National Academy of Sciences of Ukraine
4 shared publications - Artur Onyshchenko
National Transport University
3 shared publications Andriy Volodymyrovych Voskobiinyk
2 shared publications- Oleksandr Anatoliyovych Voskoboinyk
PhD, Associate professor of the Department of Hydrodynamics of Wave and Channel Flows of Institute of Hydromechanics of the NAS Ukraine, Kyiv, Ukraine
2 shared publications - Sergii Aksonov
Національний транспортний університет, Україна
2 shared publications - Anatolii Grygorovych Kharchenko
Department of Hydrodynamics of Wave and Channel Flows of Institute of Hydromechanics Department of Hydrodynamics of Wave and Channel Flows of Institute of Hydromechanics Department of Hydrodynamics of Wave and Channel Flows of Institute of Hydromechanics Department of Hydrobionics and Boundary Layer Control of Institute of Hydromechanics Institute of Hydromechanics NAS Ukraine NASU ORCID NAS Ukraine NAS Ukraine National Academy Sciences of Ukraine Kyiv Ukraine
1 shared publication
Latest Publications
- 23 July 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Mathematical modeling in engineering and technologies
- No. 1(8),p. 39-48
INTERACTION OF SURFACE GRAVITY WAVES WITH PERFORATED SCREEN
The paper examines the interaction of surface gravity waves with cylindrical marine structures within the framework of a finite depth fluid model. The problem is considered in a potential formulation. The impact of a perforated screen as a protective element around a cylindrical structure on reducing force loads on it and changing the deflection of the free surface of the water was investigated. The dependence of wave diffraction on screen perforation and its position relative to the cylinder was established. Wave diffraction research methods and their application to solving problems are discussed. Analytical solutions were built and calculations were made on this basis, which allow investigating the influence of the geometric proportions of the structure on the lateral force, in order to establish the minimum and maximum wave loads. The dependence of the total scattering power and the scattering diagram on the physical and geometric parameters of the model was established. It is shown that the perforated screen has the properties of a wave absorber, that is, it can be used as a protective element.
- 23 July 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Mathematical modeling in engineering and technologies
- No. 1(8),p. 39-48
INTERACTION OF SURFACE GRAVITY WAVES WITH PERFORATED SCREEN
The paper examines the interaction of surface gravity waves with cylindrical marine structures within the framework of a finite depth fluid model. The problem is considered in a potential formulation. The impact of a perforated screen as a protective element around a cylindrical structure on reducing force loads on it and changing the deflection of the free surface of the water was investigated. The dependence of wave diffraction on screen perforation and its position relative to the cylinder was established. Wave diffraction research methods and their application to solving problems are discussed. Analytical solutions were built and calculations were made on this basis, which allow investigating the influence of the geometric proportions of the structure on the lateral force, in order to establish the minimum and maximum wave loads. The dependence of the total scattering power and the scattering diagram on the physical and geometric parameters of the model was established. It is shown that the perforated screen has the properties of a wave absorber, that is, it can be used as a protective element.
- Open Access
- 23 July 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Mathematical modeling in engineering and technologies
- No. 1(8),p. 28-38
FEATURES OF WAVE TRANSFORMATION BY A PERMEABLE BREAKWATER
The influence of the permeability of a breakwater on the wave transformation is studied. It is assumed that the vertical breakwater, in contrast to an absolutely rigid one, is characterized by a finite permeability and can absorb the energy of incoming incident waves. In this regard, the propagation of surface gravity waves in a rectangular coordinate system is investigated. Traditional realized examples of wave energy selection and their mathematical analysis are given. From the law of conservation of energy upon reflection from vertical walls follows the dependence for the reflection coefficient as a function of the transmission coefficient. The results of experimental studies of the propagation of surface gravity waves and their interaction with absorbing walls are presented. The dependences of the coefficients of reflection and transmission of the wave, as well as the coefficients of dissipation of wave energy depending on the permeability of the vertical wall, the depth of the flow, and the length of the incident wave are obtained. The integral and spectral characteristics of the wave field and pressure fluctuations on the streamlined surface of a permeable breakwater are presented.
- 23 July 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Mathematical modeling in engineering and technologies
- No. 1(8),p. 28-38
Open AccessFEATURES OF WAVE TRANSFORMATION BY A PERMEABLE BREAKWATER
The influence of the permeability of a breakwater on the wave transformation is studied. It is assumed that the vertical breakwater, in contrast to an absolutely rigid one, is characterized by a finite permeability and can absorb the energy of incoming incident waves. In this regard, the propagation of surface gravity waves in a rectangular coordinate system is investigated. Traditional realized examples of wave energy selection and their mathematical analysis are given. From the law of conservation of energy upon reflection from vertical walls follows the dependence for the reflection coefficient as a function of the transmission coefficient. The results of experimental studies of the propagation of surface gravity waves and their interaction with absorbing walls are presented. The dependences of the coefficients of reflection and transmission of the wave, as well as the coefficients of dissipation of wave energy depending on the permeability of the vertical wall, the depth of the flow, and the length of the incident wave are obtained. The integral and spectral characteristics of the wave field and pressure fluctuations on the streamlined surface of a permeable breakwater are presented.
- 1 January 2025
- Published by National Transport University in Automobile Roads and Road Construction
- No. 117.2
SOIL ERASING DURING GROUP PLACEMENT OF BRIDGE SUPPORTS
Summary. Introduction. Scour is one of the causes of the destruction of hydraulic structures, which is formed under the action of junction flow near bluff bodies, which occurs during the construction and operation of bridge crossings over water obstacles, during the installation of drilling supports and foundations of wind power plants in the shelf zone, and the construction of mooring structures on the ground. In this regard, a significant number of experimental and theoretical studies aimed at studying the phenomenon of local scour and developing means and methods for its reduction, which is extremely relevant. Problem Statement. The process of formation of scour holes near bluff bodies installed on erosive soil is due to the formation and further development of a system of horseshoe vortex structures and wake vortices that are formed around the streamlined structure near its connection with the bottom. The main mechanism responsible for the formation and development of the scour hole includes a flow directed to the bottom in the front or frontal part of the pier, together with the formation of a system of horseshoe vortex structures near the base of the pier and wake vortices that break away from the pier surface. Purpose. The purpose of the work is to determine the features of scour during the group arrangement of bridge piers using laboratory experimental researches. Materials and methods. Experimental researches of the features of scour formation during the group arrangement of piers of two bridge crossings, which were in the wake of each other, were carried out on models of piers in laboratory conditions in a hydrodynamic channel using visual and instrumental research methods. Hydrodynamic characteristics of vortex and jet flows were obtained using specially designed and manufactured velocity and pressure sensors, and the parameters and shape of scour holes were determined using scour depth sensors. Results. Experimental researches allowed to determine the features of scour formation around the group structure of bridge piers. Profiles of local scour in front of the frontal part of the prismatic pier were obtained depending on the junction flow velocity, flow depth and Froude numbers for the single arrangement of the piers of the upper streamlined bridge crossing and the joint arrangement of the piers of two bridge crossings. The features of the formation of scour and alluvium near bridge crossing piers in an axonometric representation are presented. Conclusions. As a result of the research, it was established that the mutual arrangement of the models of the piers of two bridge crossings leads to significant changes in the scour in front of the prismatic piers of the first streamlined bridge crossing. Thus, the local scour increased by 15% at supercritical flow velocities in shallow water and decreased by almost 20% at subcritical velocities in deep water. It is shown that the scour profiles have two characteristic sections with different angles of inclination of the front surface of the scour hole, which are due to the formation of two systems of quasi-stable large-scale horseshoe vortex structures. Keywords: local scour, prismatic pier, three-row grillage, horseshoe vortex, scour profile, bridge crossing
- 1 January 2025
- Published by National Transport University in Automobile Roads and Road Construction
- No. 117.2
SOIL ERASING DURING GROUP PLACEMENT OF BRIDGE SUPPORTS
Summary. Introduction. Scour is one of the causes of the destruction of hydraulic structures, which is formed under the action of junction flow near bluff bodies, which occurs during the construction and operation of bridge crossings over water obstacles, during the installation of drilling supports and foundations of wind power plants in the shelf zone, and the construction of mooring structures on the ground. In this regard, a significant number of experimental and theoretical studies aimed at studying the phenomenon of local scour and developing means and methods for its reduction, which is extremely relevant. Problem Statement. The process of formation of scour holes near bluff bodies installed on erosive soil is due to the formation and further development of a system of horseshoe vortex structures and wake vortices that are formed around the streamlined structure near its connection with the bottom. The main mechanism responsible for the formation and development of the scour hole includes a flow directed to the bottom in the front or frontal part of the pier, together with the formation of a system of horseshoe vortex structures near the base of the pier and wake vortices that break away from the pier surface. Purpose. The purpose of the work is to determine the features of scour during the group arrangement of bridge piers using laboratory experimental researches. Materials and methods. Experimental researches of the features of scour formation during the group arrangement of piers of two bridge crossings, which were in the wake of each other, were carried out on models of piers in laboratory conditions in a hydrodynamic channel using visual and instrumental research methods. Hydrodynamic characteristics of vortex and jet flows were obtained using specially designed and manufactured velocity and pressure sensors, and the parameters and shape of scour holes were determined using scour depth sensors. Results. Experimental researches allowed to determine the features of scour formation around the group structure of bridge piers. Profiles of local scour in front of the frontal part of the prismatic pier were obtained depending on the junction flow velocity, flow depth and Froude numbers for the single arrangement of the piers of the upper streamlined bridge crossing and the joint arrangement of the piers of two bridge crossings. The features of the formation of scour and alluvium near bridge crossing piers in an axonometric representation are presented. Conclusions. As a result of the research, it was established that the mutual arrangement of the models of the piers of two bridge crossings leads to significant changes in the scour in front of the prismatic piers of the first streamlined bridge crossing. Thus, the local scour increased by 15% at supercritical flow velocities in shallow water and decreased by almost 20% at subcritical velocities in deep water. It is shown that the scour profiles have two characteristic sections with different angles of inclination of the front surface of the scour hole, which are due to the formation of two systems of quasi-stable large-scale horseshoe vortex structures. Keywords: local scour, prismatic pier, three-row grillage, horseshoe vortex, scour profile, bridge crossing
- Open Access
- 28 August 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (5 (130)) , 45-56
Establishing patterns of change in the coefficients of reflection, transmission, and dissipation of wave energy depending on parameters of a permeable vertical wall
The object of research is permeable vertical walls (breakwaters) with different degrees of permeability. This paper reports the results of experimental research into the interaction of gravity waves with models of permeable vertical walls (breakwaters), which were formed from cylindrical piles of circular cross-section. With the help of visual and instrumental studies, the features of interaction of surface gravity waves with permeable vertical walls of different permeability have been identified. The degree of wave transformation by these walls was also determined in the form of reflection, transmission, and dissipation coefficients of wave energy. It was established that with a decrease in the permeability of the vertical wall and an increase in the steepness of the initial wave and a decrease in its period, the height of the reflected wave increased. The pattern of the transmitted wave height had the opposite trend. It was determined that the wave reflection coefficient increased with a decrease in the permeability of the vertical wall and the steepness of the initial wave. The wave transmission coefficient had the opposite trend, namely, it increased with increasing wall permeability and with decreasing steepness of the initial wave. The gravity wave energy dissipation coefficient decreased with increasing vertical wall permeability, but for waves with a significant steepness hi/λ>0.038, a decrease in the wave energy dissipation coefficient was observed for walls with low permeability and the appearance of extreme values of this coefficient. Thus, features in the interaction of surface gravity waves with permeable vertical walls (breakwaters) of different permeability have been researched and the degree of wave transformation by these walls has been determined, which could make it possible to effectively design and operate permeable vertical walls as coastal protection structures
- 28 August 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (5 (130)) , 45-56
Open AccessEstablishing patterns of change in the coefficients of reflection, transmission, and dissipation of wave energy depending on parameters of a permeable vertical wall
The object of research is permeable vertical walls (breakwaters) with different degrees of permeability. This paper reports the results of experimental research into the interaction of gravity waves with models of permeable vertical walls (breakwaters), which were formed from cylindrical piles of circular cross-section. With the help of visual and instrumental studies, the features of interaction of surface gravity waves with permeable vertical walls of different permeability have been identified. The degree of wave transformation by these walls was also determined in the form of reflection, transmission, and dissipation coefficients of wave energy. It was established that with a decrease in the permeability of the vertical wall and an increase in the steepness of the initial wave and a decrease in its period, the height of the reflected wave increased. The pattern of the transmitted wave height had the opposite trend. It was determined that the wave reflection coefficient increased with a decrease in the permeability of the vertical wall and the steepness of the initial wave. The wave transmission coefficient had the opposite trend, namely, it increased with increasing wall permeability and with decreasing steepness of the initial wave. The gravity wave energy dissipation coefficient decreased with increasing vertical wall permeability, but for waves with a significant steepness hi/λ>0.038, a decrease in the wave energy dissipation coefficient was observed for walls with low permeability and the appearance of extreme values of this coefficient. Thus, features in the interaction of surface gravity waves with permeable vertical walls (breakwaters) of different permeability have been researched and the degree of wave transformation by these walls has been determined, which could make it possible to effectively design and operate permeable vertical walls as coastal protection structures