Wenze Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wenze Gao has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Bin Hou
Xidian University
3 shared publications - Chunzhou Shi
State Key Discipline Laboratory of Wide Band-gap Semiconductor Technology, School of Microelectronics, Xidian University, Xian, China
3 shared publications - Hao Lu
Xidian University
3 shared publications - Ling Yang
Xidian University
3 shared publications - Mei Wu
Xidian University
3 shared publications Meng Zhang
State Key Discipline Laboratory of Wide Bandgap Semiconductor Technology, School of Microelectronics, Xidian University , Xi'an 710071
3 shared publications
Latest Publications
- 12 January 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (2)
Modulation of Fe doping tail for high CW power handling and OIP3 in HEMT-based RF switches compatible with PA co-integration
In this work, we present the first investigation into the impact mechanism of Fe doping tails on the radio frequency (RF) switching performance of AlGaN/gallium nitride (GaN) high electron mobility transistors (HEMTs). It is illustrated that a thicker unintentionally doped (UID) GaN layer combined with a thinner Fe-doped buffer layer significantly reduces Fe concentration in the near-channel region of the UID GaN layer. HEMTs with weaker Fe doping tails exhibit superior RF switching performance. This phenomenon occurs as the Fe tailing effect during high-power RF switch operation aggravates the dynamic resistance degradation of the series HEMT and modifies the channel potential distribution, which in turn induces a large vertical component capacitance in the shunt HEMT. Fabricated switch devices with 500 nm gate length on the optimized epitaxial structure demonstrated outstanding performance: Pmax = 32 dBm at 3.6 GHz under −10 V gate bias, and Pmax > 38 dBm with OIP3 = 56 dBm at −20 V gate bias. These experimental results demonstrate that controlled Fe tail effect engineering enables HEMTs to achieve both high-power handling and high linearity simultaneously, demonstrating a viable approach for developing high-performance RF switches compatible with Fe-doped buffer power amplifiers.
- 12 January 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (2)
Modulation of Fe doping tail for high CW power handling and OIP3 in HEMT-based RF switches compatible with PA co-integration
In this work, we present the first investigation into the impact mechanism of Fe doping tails on the radio frequency (RF) switching performance of AlGaN/gallium nitride (GaN) high electron mobility transistors (HEMTs). It is illustrated that a thicker unintentionally doped (UID) GaN layer combined with a thinner Fe-doped buffer layer significantly reduces Fe concentration in the near-channel region of the UID GaN layer. HEMTs with weaker Fe doping tails exhibit superior RF switching performance. This phenomenon occurs as the Fe tailing effect during high-power RF switch operation aggravates the dynamic resistance degradation of the series HEMT and modifies the channel potential distribution, which in turn induces a large vertical component capacitance in the shunt HEMT. Fabricated switch devices with 500 nm gate length on the optimized epitaxial structure demonstrated outstanding performance: Pmax = 32 dBm at 3.6 GHz under −10 V gate bias, and Pmax > 38 dBm with OIP3 = 56 dBm at −20 V gate bias. These experimental results demonstrate that controlled Fe tail effect engineering enables HEMTs to achieve both high-power handling and high linearity simultaneously, demonstrating a viable approach for developing high-performance RF switches compatible with Fe-doped buffer power amplifiers.
- 15 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (11) , 1807-1810
A Series-Shunt Compact GaN HEMT With High Isolation and Broadband Performance for RF Switch Application
This article first proposes a series-shunt compact (SSC) radio frequency (RF) switch design based on gallium nitride (GaN) high-electron-mobility transistors (HEMTs) which can significantly improve the device’s isolation (ISO) and mitigate the degradation of insertion loss (IL). The design follows a distributed architecture, introducing a shunt structure on conventional HEMTs and tightly coupling the capacitances of the series and shunt parts’ active regions. This leads to an increase in $C_{\mathbf {on}}$ during the on-state, while the depletion of the negatively biased shunt gate enhances signal shielding, avoiding the effect of increased frequency on IL degradation. Moreover, the device exhibits excellent ISO performance in the off-state. Overall, these design characteristics enable the 500 nm gate-length SSC GaN HEMT to achieve an ISO larger than 14 dB, an IL flatness of 0.38 dB across the 2–20 GHz range, and a $R_{\mathbf {on}} C_{\mathbf {off}}$ coefficient of 478 fs. Currently, the SSC HEMT boasts state-of-the-art ISO metrics in single-cell devices, outperforming even some typical circuit topologies. Additionally, the SSC HEMT achieves a maximum output power ( $P_{\mathbf {max}}$ ) >37 dBm and an output third-order intercept point (OIP3) = 66 dBm at 3.6 GHz. These results demonstrate the great potential of the SSC HEMT in improving ISO and mitigating IL degradation across a broad frequency band, providing new possibilities for device selection in broadband RF circuits.
- 15 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (11) , 1807-1810
A Series-Shunt Compact GaN HEMT With High Isolation and Broadband Performance for RF Switch Application
This article first proposes a series-shunt compact (SSC) radio frequency (RF) switch design based on gallium nitride (GaN) high-electron-mobility transistors (HEMTs) which can significantly improve the device’s isolation (ISO) and mitigate the degradation of insertion loss (IL). The design follows a distributed architecture, introducing a shunt structure on conventional HEMTs and tightly coupling the capacitances of the series and shunt parts’ active regions. This leads to an increase in $C_{\mathbf {on}}$ during the on-state, while the depletion of the negatively biased shunt gate enhances signal shielding, avoiding the effect of increased frequency on IL degradation. Moreover, the device exhibits excellent ISO performance in the off-state. Overall, these design characteristics enable the 500 nm gate-length SSC GaN HEMT to achieve an ISO larger than 14 dB, an IL flatness of 0.38 dB across the 2–20 GHz range, and a $R_{\mathbf {on}} C_{\mathbf {off}}$ coefficient of 478 fs. Currently, the SSC HEMT boasts state-of-the-art ISO metrics in single-cell devices, outperforming even some typical circuit topologies. Additionally, the SSC HEMT achieves a maximum output power ( $P_{\mathbf {max}}$ ) >37 dBm and an output third-order intercept point (OIP3) = 66 dBm at 3.6 GHz. These results demonstrate the great potential of the SSC HEMT in improving ISO and mitigating IL degradation across a broad frequency band, providing new possibilities for device selection in broadband RF circuits.
- 2 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (10)
The electrical characteristic and trapping effect of AlGaN/GaN HEMTs with Fe and Fe/C co-doped GaN buffer layer
In this work, the influence of the Fe and Fe/C co-doped buffer on the AlGaN/GaN HEMTs is systematically investigated and compared. Due to the pronounced Fe tail in the unintentionally doped layer of the Fe-doped buffer compared to the Fe/C co-doped buffer, and the utilization of a two-step C doping process in the Fe/C co-doped buffer, it results in effectively reducing leakage current and increasing breakdown voltage without sacrificing saturation current and peak transconductance. Meanwhile, the RF characteristics of the Fe/C co-doped buffer are also superior to the Fe-doped buffer. More importantly, Drain Transient Current measurements indicate that the current collapse in the Fe/C co-doped buffer is smaller than that in the Fe-doped buffer. Through simulation analysis, the reason was identified: In the near-channel region, the weaker Fe tail effect in Fe/C co-doped buffer leads to a lower acceptor trap ionization. When the concentration of C exceeds 1 × 1016 cm−3, the ionization of traps introduced by Fe is suppressed. Additionally, the two-step C impurity distribution in the Fe/C co-doped buffer design modulates the electric field and potential, reducing the effective range of the electric field and potential, thereby effectively reducing the trap effects. These results are highly meaningful for the design of high-power amplifier epitaxial structures.
- 2 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (10)
The electrical characteristic and trapping effect of AlGaN/GaN HEMTs with Fe and Fe/C co-doped GaN buffer layer
In this work, the influence of the Fe and Fe/C co-doped buffer on the AlGaN/GaN HEMTs is systematically investigated and compared. Due to the pronounced Fe tail in the unintentionally doped layer of the Fe-doped buffer compared to the Fe/C co-doped buffer, and the utilization of a two-step C doping process in the Fe/C co-doped buffer, it results in effectively reducing leakage current and increasing breakdown voltage without sacrificing saturation current and peak transconductance. Meanwhile, the RF characteristics of the Fe/C co-doped buffer are also superior to the Fe-doped buffer. More importantly, Drain Transient Current measurements indicate that the current collapse in the Fe/C co-doped buffer is smaller than that in the Fe-doped buffer. Through simulation analysis, the reason was identified: In the near-channel region, the weaker Fe tail effect in Fe/C co-doped buffer leads to a lower acceptor trap ionization. When the concentration of C exceeds 1 × 1016 cm−3, the ionization of traps introduced by Fe is suppressed. Additionally, the two-step C impurity distribution in the Fe/C co-doped buffer design modulates the electric field and potential, reducing the effective range of the electric field and potential, thereby effectively reducing the trap effects. These results are highly meaningful for the design of high-power amplifier epitaxial structures.