QCQingyuan Chang

Qingyuan Chang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qingyuan Chang has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • 4.3-kV Fully Vertical β -Ga 2 O 3 Heterojunction Barrier Schottky Diode With Sputtered p-GaN

    by Qingyuan Chang, Ling Yang, Bin Hou, Mao Jia, Youjun Zhu, Mei Wu, Meng Zhang, Qing Zhu, Hao Lu, Xichen Wang, et al.

    In this article, a fully vertical $\beta $ -Ga2O3 heterojunction barrier Schottky (HJBS) diode utilizing a sputtered p-gallium nitride (GaN) layer is reported. The device exhibits a high destructive breakdown voltage (BV) of 4335V, a turn-on voltage ( ${V}_{\textit {on}}\text {)}$ of 0.8V, and a specific on-resistance ( ${R}_{\textit {on},\textit {sp}}\text {)}$ of 6.79m $\Omega \cdot $ cm2, resulting in an outstanding Baliga’s figure of merit (BFOM) of 2.77GW/cm2. This high performance is primarily attributed to the effective electric-field modulation introduced by the p-GaN layer beneath the anode, which suppresses peak electric-field crowding and significantly delays the onset of breakdown. To further validate the material quality and structural integrity of the sputtered p-GaN layer, comprehensive characterization using scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM) was conducted, demonstrating a dense morphology and well-oriented crystalline structure. These results confirm that sputtering is a viable and promising approach for integrating p-GaN, which is particularly important in the absence of effective p-type doping technology in $\beta $ -Ga2O3. Furthermore, temperature-dependent–current–voltage ( $I$ – $V$ – ${T}\text {)}$ measurements were carried out to investigate the reverse leakage transport mechanisms. It was found that in the low reverse voltage range (−1to −20V), the Poole–Frenkel (PF) emission dominates, with a trap barrier height ( ${q}\phi _{t}\text {)}$ of 0.74eV. With increasing reverse bias (−20to −200V), the dominant transport mechanism transitions to 3-D Mott variable-range hopping (3-D Mott–VRH).


  • Modulation of Fe doping tail for high CW power handling and OIP3 in HEMT-based RF switches compatible with PA co-integration

    by Xu Zou, Meng Zhang, Ling Yang, Yutong Jiang, Qian Yu, Chunzhou Shi, Shiming Li, Wenze Gao, Qingyuan Chang, Weiyu Ren, et al.

    In this work, we present the first investigation into the impact mechanism of Fe doping tails on the radio frequency (RF) switching performance of AlGaN/gallium nitride (GaN) high electron mobility transistors (HEMTs). It is illustrated that a thicker unintentionally doped (UID) GaN layer combined with a thinner Fe-doped buffer layer significantly reduces Fe concentration in the near-channel region of the UID GaN layer. HEMTs with weaker Fe doping tails exhibit superior RF switching performance. This phenomenon occurs as the Fe tailing effect during high-power RF switch operation aggravates the dynamic resistance degradation of the series HEMT and modifies the channel potential distribution, which in turn induces a large vertical component capacitance in the shunt HEMT. Fabricated switch devices with 500 nm gate length on the optimized epitaxial structure demonstrated outstanding performance: Pmax = 32 dBm at 3.6 GHz under −10 V gate bias, and Pmax > 38 dBm with OIP3 = 56 dBm at −20 V gate bias. These experimental results demonstrate that controlled Fe tail effect engineering enables HEMTs to achieve both high-power handling and high linearity simultaneously, demonstrating a viable approach for developing high-performance RF switches compatible with Fe-doped buffer power amplifiers.

  • Establishment and modulation of linear VTH model with low interface states using atomic layer etching for E-mode GaN-based P-MOSFETs for digital logic application

    by Yifan Gao, Ling Yang, Qing Zhu, Bin Hou, Qingyuan Chang, Xuan Su, Mei Wu, Meng Zhang, Hao Lu, Xiaohua Ma, et al.

    In this work, the modulation effect of low interface states for threshold voltage (VTH) model of GaN-based p-channel metal-oxide-semiconductor field effect transistors (P-MOSFETs) is investigated. By using atomic layer etching, P-MOSFETs with low interface states and varying channel thickness (tch) were fabricated. Depending on the deposition of high quality Al2O3 as gate dielectric and improved interface states, enhancement-mode P-MOSFET with low off-state current (∼10−9 mA/mm) and high Ion/Ioff ratio (∼109) is obtained. Based on the experiment, the linear model between VTH and tch is established. Taking the effect of interface charges into account, the linear VTH model for P-MOSFETs is modulated positively with low interface states compared with inductively couple plasma method. This resulted in a reduced critical channel thickness of 8.5 nm to acquire enhancement operation for P-MOSFETs with low interface states in this work. The low interface states also contribute to improved performance of P-MOSFETs on on-resistance, saturation current and transconductance. Additionally, physical implications of the parameters in the linear VTH model are also investigated, theoretically demonstrating how interface states modulate VTH.


  • Improved Breakdown Voltage and RF Power Characteristics of GaN HEMTs by Layered C/Fe-Doped GaN Buffer

    by Qian Yu, Meng Zhang, Ling Yang, Zou Xu, Hao Lu, Chunzhou Shi, Mei Wu, Bin Hou, Qingyuan Chang, Wenze Gao, et al.

    In this article, an innovative layered GaN buffer is proposed. The upper layer is low-concentration C-doped, and the lower layer is the Fe-doped GaN buffer layer used in AlGaN/GaN high electronic mobility transistors (HEMTs). While suppressing the Fe doping tail, the breakdown voltage of the GaN HEMT is increased from 128 to 174 V. Because of the suppression of the Fe-doped tail, the mobility and transconductance ( $\text {g}_{m}\text {)}$ were also significantly improved. The C-doped concentration of ${5}\times {10}^{{16}}$ /cm3 does not significantly worsen the current collapse (CC) of the GaN HEMTs. The CC of C/Fe-doped GaN HEMTs is 3% at the (−3.5, 20) V. The increase in $\text {g}_{m}$ results in a higher current gain cut-off frequency ( ${f}_{T}\text {)}$ and the maximum oscillation frequency ( ${f}_{\max }\text {)}$ . The C/Fe-doped buffer GaN HEMTs exhibit high performance in the RF load-pull of 12 GHz. The 24.1 W/mm of output power density and 57% of power-added efficiency (PAE) are realized at 80 V of drain voltage. This can provide a new idea for the buffer layer of high RF power GaN HEMTs.


  • A Series-Shunt Compact GaN HEMT With High Isolation and Broadband Performance for RF Switch Application

    by Xu Zou, Meng Zhang, Ling Yang, Bin Hou, Mei Wu, Chupeng Yi, Hao Lu, Mao Jia, Qian Yu, Chunzhou Shi, et al.

    This article first proposes a series-shunt compact (SSC) radio frequency (RF) switch design based on gallium nitride (GaN) high-electron-mobility transistors (HEMTs) which can significantly improve the device’s isolation (ISO) and mitigate the degradation of insertion loss (IL). The design follows a distributed architecture, introducing a shunt structure on conventional HEMTs and tightly coupling the capacitances of the series and shunt parts’ active regions. This leads to an increase in $C_{\mathbf {on}}$ during the on-state, while the depletion of the negatively biased shunt gate enhances signal shielding, avoiding the effect of increased frequency on IL degradation. Moreover, the device exhibits excellent ISO performance in the off-state. Overall, these design characteristics enable the 500 nm gate-length SSC GaN HEMT to achieve an ISO larger than 14 dB, an IL flatness of 0.38 dB across the 2–20 GHz range, and a $R_{\mathbf {on}} C_{\mathbf {off}}$ coefficient of 478 fs. Currently, the SSC HEMT boasts state-of-the-art ISO metrics in single-cell devices, outperforming even some typical circuit topologies. Additionally, the SSC HEMT achieves a maximum output power ( $P_{\mathbf {max}}$ ) >37 dBm and an output third-order intercept point (OIP3) = 66 dBm at 3.6 GHz. These results demonstrate the great potential of the SSC HEMT in improving ISO and mitigating IL degradation across a broad frequency band, providing new possibilities for device selection in broadband RF circuits.


  • Top Cited Papers

    3 kV fully vertical β-Ga2O3 junction termination extension Schottky barrier diode with sputtered p-GaN

    by Qingyuan Chang, Bin Hou, Ling Yang, Mao Jia, Youjun Zhu, Mei Wu, Meng Zhang, Qing Zhu, Hao Lu, Jiarui Xu, et al.

    In this work, we present the fabrication of a fully vertical β-Ga2O3 Schottky barrier diode with junction termination extension (JTE-SBD) utilizing a p-GaN layer produced by sputtering, offering a solution to the absence of p-Ga2O3 materials. The p-GaN/n-Ga2O3 JTE-SBD demonstrates a turn-on voltage (Von) of 0.8 V, a specific on-resistance (Ron,sp) of 6.15 mΩ·cm2, an ideality factor (n) of 1.24, a breakdown voltage of 3 kV, and a Baliga's Figure of Merit of 1.46 GW/cm2. The current–voltage–temperature (I–V–T) testing has confirmed a transition in the dominant leakage mechanisms from the Poole–Frenkel mechanism to variable-range hopping.


  • High RF Performance E-Mode GaN-on-Si HEMTs With Pₒᵤₜ of 5.32 W/mm Using High-Quality Ultrathin Buffer

    by Jiale Du, Bin Hou, Ling Yang, Yachao Zhang, Qing Zhu, Meng Zhang, Mei Wu, Sen Huang, Fang Song, Hao Lu, et al.

    In this paper, we report a high-performance enhancement-mode GaN HEMT fabricated on high-quality ultrathin buffer, which achieved by a two-step-graded (TSG) transition structure on high-resistivity (HR) silicon substrate. Owing to rapid dislocation annihilation of TSG transition structure, the ultrathin buffer exhibits a low total dislocation density (TDD) of 1.7×10 9 cm -2 , which could make a contribution to the improvement of current and RF power performance. As a result, an E-mode GaN HEMT fabricated on this structure presents a maximum drain current of 620 mA/mm, a threshold voltage ( V th ) of 0.7 V, and a transconductance of 360 mS/mm. Furthermore, load-pull measurements yield a maximum output power density ( P out ) of 5.32 W/mm at 3.6 GHz and V DS = 35V in pulse mode, which represents the top level for E-mode GaN-on-Si devices reported to date. The high-quality GaN epitaxy and splendid E-mode HEMT shown in this work reveal great potential for GaN-on-Si RF applications.


  • The electrical characteristic and trapping effect of AlGaN/GaN HEMTs with Fe and Fe/C co-doped GaN buffer layer

    by Xuan Su, Ling Yang, Meng Zhang, Qing Zhu, Wenze Gao, Wei Zhao, Qian Yu, Qingyuan Chang, Hao Lu, Chunzhou Shi, et al.

    In this work, the influence of the Fe and Fe/C co-doped buffer on the AlGaN/GaN HEMTs is systematically investigated and compared. Due to the pronounced Fe tail in the unintentionally doped layer of the Fe-doped buffer compared to the Fe/C co-doped buffer, and the utilization of a two-step C doping process in the Fe/C co-doped buffer, it results in effectively reducing leakage current and increasing breakdown voltage without sacrificing saturation current and peak transconductance. Meanwhile, the RF characteristics of the Fe/C co-doped buffer are also superior to the Fe-doped buffer. More importantly, Drain Transient Current measurements indicate that the current collapse in the Fe/C co-doped buffer is smaller than that in the Fe-doped buffer. Through simulation analysis, the reason was identified: In the near-channel region, the weaker Fe tail effect in Fe/C co-doped buffer leads to a lower acceptor trap ionization. When the concentration of C exceeds 1 × 1016 cm−3, the ionization of traps introduced by Fe is suppressed. Additionally, the two-step C impurity distribution in the Fe/C co-doped buffer design modulates the electric field and potential, reducing the effective range of the electric field and potential, thereby effectively reducing the trap effects. These results are highly meaningful for the design of high-power amplifier epitaxial structures.