Lingrui Shen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lingrui Shen has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Yunquan Li
The Shien-Ming Wu School of Intelligent Engineering, South China University of Technology, Guangzhou 510641, China
4 shared publications - Hao Liu
Department of Mechanical Engineering, The University of Hong Kong, Hong Kong
2 shared publications - Jie Huang
Shien-Ming Wu School of Intelligent Engineering, South China University of Technology, Guangzhou, China
2 shared publications - Qingqian Cai
International Joint Laboratory on Human‐Centric Intelligence and Systems Shien‐Ming Wu School of Intelligent Engineering South China University of Technology Guangzhou 511442 China
2 shared publications Changchun Wu
Department of Mechanical Engineering, The University of Hong Kong, Hong Kong Special Administrative Region of China, People’s Republic of China
1 shared publication- Changchun Wu
Department of Mechanical Engineering, The University of Hong Kong, Hong Kong
1 shared publication
Latest Publications
- 23 September 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (22)
Paired Fluid‐Mediated Bidirectional SMA Actuators for Soft Robots
Shape memory alloys (SMAs) are promising materials for soft robotic actuators due to their high energy density and compact form. However, conventional SMA‐based systems are inherently limited in achieving effective bidirectional motion. To address this challenge, Paired Fluid‐Mediated Bidirectional Shape Memory Alloy (Paired‐FBSMA) actuators are proposed, which couple thermally driven SMA springs with fluid‐mediated force transmission. Each FBSMA unit consists of a fluid‐filled bellows actuated by two parallel SMA springs, and two such units are interconnected to enable reciprocal fluid exchange and active bidirectional actuation. This design supports modular and flexible integration into robotic systems while enhancing actuation efficiency. By tuning the water‐air ratio inside the bellows, both output force and displacement stroke can be effectively modulated, with higher water content yielding greater recovery forces. Extensive experimental validation demonstrates that Paired‐FBSMA actuators outperform conventional SMA‐only and SMA‐bellows configurations in both stroke and force generation. The actuators are implemented in a soft crawling robot and a two‐degree‐of‐freedom joint mechanism, achieving stable crawling locomotion and repeatable reciprocating motion. These results highlight the versatility, tunability, and strong potential of the Paired‐FBSMA actuators for integration into next‐generation soft robotic systems requiring compact, distributed, and high‐output actuation.
- 23 September 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (22)
Paired Fluid‐Mediated Bidirectional SMA Actuators for Soft Robots
Shape memory alloys (SMAs) are promising materials for soft robotic actuators due to their high energy density and compact form. However, conventional SMA‐based systems are inherently limited in achieving effective bidirectional motion. To address this challenge, Paired Fluid‐Mediated Bidirectional Shape Memory Alloy (Paired‐FBSMA) actuators are proposed, which couple thermally driven SMA springs with fluid‐mediated force transmission. Each FBSMA unit consists of a fluid‐filled bellows actuated by two parallel SMA springs, and two such units are interconnected to enable reciprocal fluid exchange and active bidirectional actuation. This design supports modular and flexible integration into robotic systems while enhancing actuation efficiency. By tuning the water‐air ratio inside the bellows, both output force and displacement stroke can be effectively modulated, with higher water content yielding greater recovery forces. Extensive experimental validation demonstrates that Paired‐FBSMA actuators outperform conventional SMA‐only and SMA‐bellows configurations in both stroke and force generation. The actuators are implemented in a soft crawling robot and a two‐degree‐of‐freedom joint mechanism, achieving stable crawling locomotion and repeatable reciprocating motion. These results highlight the versatility, tunability, and strong potential of the Paired‐FBSMA actuators for integration into next‐generation soft robotic systems requiring compact, distributed, and high‐output actuation.
- 1 July 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (7) , 075050
Design and applications of a pneumatic-tendon coupled air spring (PTCAS) with variable stiffness and self-sensing properties
Integrating variable stiffness elastic elements (VSEEs) into tendon-driven systems significantly enhances intrinsic compliance. However, conventional VSEEs typically employ rigid springs with complex mechanical structures, leading to increased system complexity, weight, and cost. To overcome these limitations, this paper introduces a novel pneumatic-tendon coupled air spring (PTCAS), weighing only approximately 30 g. The proposed PTCAS consists of a bellow-type pneumatic chamber constrained by a rigid frame and integrated tendon-driven connections, exhibiting two distinct stiffness stages: a high-stiffness preloading stage and a more compliant compression stage. By regulating the pre-charged air pressure, the PTCAS achieves a broad stiffness modulation range (up to 8 times variation in the preloading stage) without altering external dimensions. Moreover, its closed air-chamber structure inherently enables self-sensing capabilities by detecting internal air pressure variations, eliminating the need for extra sensing components. Two robotic applications, a robotic joint, and a soft gripper were developed to validate the PTCAS design. Experimental results demonstrate that the robotic joint exhibits versatile capabilities, including variable stiffness interactions, object manipulation, and collision perception, while the gripper provides adaptive compliant grasping with tunable stiffness, supporting objects up to 3.5 kg in a pneumatically locked state and enabling reliable shape sensing during grasping. These findings highlight the significant potential of PTCAS for compact, adaptive robotic systems requiring adjustable stiffness, compliant interaction, and integrated real-time sensing.
- 1 July 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (7) , 075050
Design and applications of a pneumatic-tendon coupled air spring (PTCAS) with variable stiffness and self-sensing properties
Integrating variable stiffness elastic elements (VSEEs) into tendon-driven systems significantly enhances intrinsic compliance. However, conventional VSEEs typically employ rigid springs with complex mechanical structures, leading to increased system complexity, weight, and cost. To overcome these limitations, this paper introduces a novel pneumatic-tendon coupled air spring (PTCAS), weighing only approximately 30 g. The proposed PTCAS consists of a bellow-type pneumatic chamber constrained by a rigid frame and integrated tendon-driven connections, exhibiting two distinct stiffness stages: a high-stiffness preloading stage and a more compliant compression stage. By regulating the pre-charged air pressure, the PTCAS achieves a broad stiffness modulation range (up to 8 times variation in the preloading stage) without altering external dimensions. Moreover, its closed air-chamber structure inherently enables self-sensing capabilities by detecting internal air pressure variations, eliminating the need for extra sensing components. Two robotic applications, a robotic joint, and a soft gripper were developed to validate the PTCAS design. Experimental results demonstrate that the robotic joint exhibits versatile capabilities, including variable stiffness interactions, object manipulation, and collision perception, while the gripper provides adaptive compliant grasping with tunable stiffness, supporting objects up to 3.5 kg in a pneumatically locked state and enabling reliable shape sensing during grasping. These findings highlight the significant potential of PTCAS for compact, adaptive robotic systems requiring adjustable stiffness, compliant interaction, and integrated real-time sensing.
- 13 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (2) , 1178-1185
Autologous Variable Stiffness Soft Finger Based on Cross-Layer Jamming for Multimode Grasping
Layer jamming variable stiffness technologies have been widely explored to enhance the load-bearing capacity of soft robotic fingers. However, these technologies typically require layer-jamming units to be attached to soft actuators as additional components, complicating structural design and limiting flexible multiconfiguration actuation. To address these problems, we propose an autologous variable stiffness soft finger (AVSSF) that integrates the cross-layer jamming joints (CLJJs) as both the variable stiffness unit and the finger itself, actuated by tendons. This design ensures a simple and compact structure while offering a wide range of stiffness adjustment. Additionally, by coordinating tendon actuation with the control of the CLJJ's jammed and unjammed states, the AVSSF achieves multiple configurations, providing flexibility in operation. Experimental results demonstrates that the stiffness of the AVSSF increased by a factor of 79.5 after modulation. We develop a two-finger gripper based on this design, capable of executing four distinct grasping modes: power grasp, adaptive pinch, expansion grasp, and hook. This gripper demonstrates adaptability to various objects and environments, highlighting its potential for diverse applications. In summary, this work offers insights into the advancement of autologous variable stiffness technologies and the development of multimodal grasping capabilities.
- 13 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (2) , 1178-1185
Autologous Variable Stiffness Soft Finger Based on Cross-Layer Jamming for Multimode Grasping
Layer jamming variable stiffness technologies have been widely explored to enhance the load-bearing capacity of soft robotic fingers. However, these technologies typically require layer-jamming units to be attached to soft actuators as additional components, complicating structural design and limiting flexible multiconfiguration actuation. To address these problems, we propose an autologous variable stiffness soft finger (AVSSF) that integrates the cross-layer jamming joints (CLJJs) as both the variable stiffness unit and the finger itself, actuated by tendons. This design ensures a simple and compact structure while offering a wide range of stiffness adjustment. Additionally, by coordinating tendon actuation with the control of the CLJJ's jammed and unjammed states, the AVSSF achieves multiple configurations, providing flexibility in operation. Experimental results demonstrates that the stiffness of the AVSSF increased by a factor of 79.5 after modulation. We develop a two-finger gripper based on this design, capable of executing four distinct grasping modes: power grasp, adaptive pinch, expansion grasp, and hook. This gripper demonstrates adaptability to various objects and environments, highlighting its potential for diverse applications. In summary, this work offers insights into the advancement of autologous variable stiffness technologies and the development of multimodal grasping capabilities.
- 6 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (10) , 8897-8904
Untethered Soft Rolling Robot Based on Pneumatic-Tendon Coupled Actuation
The Soft Rolling Robot (SRR) excels in adaptability across diverse natural terrains, demonstrating significant flexibility, environmental interaction capabilities, and impact resistance. However, the development of Untethered Soft Rolling Robots (USRR) faces challenges in locomotion speed and controllability due to the limited load-carrying capacity of untethered systems. This study introduces a novel actuation system that combines pneumatic actuation with tendon actuation to enhance USRR performance. We propose a pneumatic-tendon coupled actuated telescopic soft leg structure that uses tendons for precise position and velocity control, while concurrently adjusting stiffness through air pressure modulation. This system interconnects the gas circuits of multiple soft legs, enabling internal gas circulation during rolling motion. An octagonal planar rolling robot with a radial skeleton structure was designed and fabricated to validate this actuation method. Theoretical analysis and experimental research have shown that the interconnected gas circuit design can significantly reduce tendon tension in actuation of soft legs and enhance their output force and range of motion. Performance tests on the USRR reveal excellent speed regulation capabilities, achieving a maximum speed of 0.19 m/s, and demonstrate adaptability to various terrains including slopes, steps, grasslands, gravel roads, and shallow water.
- 6 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (10) , 8897-8904
Untethered Soft Rolling Robot Based on Pneumatic-Tendon Coupled Actuation
The Soft Rolling Robot (SRR) excels in adaptability across diverse natural terrains, demonstrating significant flexibility, environmental interaction capabilities, and impact resistance. However, the development of Untethered Soft Rolling Robots (USRR) faces challenges in locomotion speed and controllability due to the limited load-carrying capacity of untethered systems. This study introduces a novel actuation system that combines pneumatic actuation with tendon actuation to enhance USRR performance. We propose a pneumatic-tendon coupled actuated telescopic soft leg structure that uses tendons for precise position and velocity control, while concurrently adjusting stiffness through air pressure modulation. This system interconnects the gas circuits of multiple soft legs, enabling internal gas circulation during rolling motion. An octagonal planar rolling robot with a radial skeleton structure was designed and fabricated to validate this actuation method. Theoretical analysis and experimental research have shown that the interconnected gas circuit design can significantly reduce tendon tension in actuation of soft legs and enhance their output force and range of motion. Performance tests on the USRR reveal excellent speed regulation capabilities, achieving a maximum speed of 0.19 m/s, and demonstrate adaptability to various terrains including slopes, steps, grasslands, gravel roads, and shallow water.